Groundwater Monitoring Well Equipment In Asia & Middle East
-
PremiumManufactured by AMS, Inc.based in USA
The 9520-TR comes standard with the 90 ft-lb hydraulic hammer, and the option to upgrade to other hammer models. For those situations where you need to install groundwater monitoring wells, you can add an auger drive head. With the choice of two different auger drive heads, and 2 different hammer options, you can't go wrong with the 9520-TR. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
indicator - Designed for long and frequent use - To be used with the prescribed silicone tubes - Suction head up to 6-9 meters - Basic tool for all groundwater research - Ideal for purging and sampling with the low-flow sampling method of groundwater monitoring ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS groundwater samplers are often used for the initial site investigation because of the ability to rapidly sample a large number of locations, and to collect representative samples of all contaminants. Small diameter groundwater monitoring wells are installed by direct push. Our kits provide everything needed for quick and ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS hollowstem augers give the field user the ability to auger through difficult lithologies, including hardpan, resulting in less need for multiple drill rigs for complicated field situations. They are ideal for drilling boreholes for lithologic description, sample collection for chemical analysis, and conventional groundwater monitoring ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Diameter 19 mm – ideal for deep wells. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement. Suitable for measurements in deep wells through small diameter of only 19 mm. With piezo-resistive stainless steel measurement ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Submersible probe – piezo-resistive stainless steel measurement cell. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement in clean to slightly polluted liquids. With piezo-resistive stainless steel measurement ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Pressure-tight closure of temporary or permanent artesian groundwater monitoring ...
-
PremiumManufactured by AMS, Inc.based in USA
Full Groundwater Pumping Automation for Pump Deployment, Retrieval and Operation up to 300 feet Deep. Management of dedicated pump installation and monitoring is enhanced with the patented AMS design. The automation of boom extension, rotation and elevation plus motor-driven spools for pump deployment/retrieval, make the 7000 series ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Anti-vandalism closure of groundwater monitoring wells from 1.5"- 6" pipe diameter // Special alloy of cast aluminum for high corrosion and weather resistance even in frost // Available in two closure variants (normal / safety lock) // Sealing insert for flood-prone ground water measuring points (optional) ...
-
Manufactured by HMA Geotechnical a division of the HMA Groupbased in AUSTRALIA
The Leakwise ID-221 sensor detects the presence of and monitors the buildup of thin layers of hydrocarbons on water. Many petroleum and power companies use it for early detection, warning, and control of oil leaks and spills in wet sumps, tanks, and groundwater monitoring wells with a minimum water level of 30 cm (12.0 in). Other ...
-
Manufactured by Leakwisebased in ISRAEL
leaks and spills in wet sumps, storage tanks and groundwater monitoring wells with a minimum water level of 30 cm (12.0 in). Other applications include hydrocarbon detection and monitoring in oil/water separators, cooling water trenches, stormwater runoffs, retention ponds, boiler condensate tanks and wastewater sewer systems. ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Affordable, portable hand-held device for determining the current water level to a depth of 200 meters // Optical and acoustic signal on contact with water // LED battery status indicator // Robust support frame with a handle made of ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Portable hand-held device for determining the current water level up to 500 meters depth // Optical and acoustic signal (option) on contact with water // Available on hand drum or with a robust aluminum support frame // Extensible scope of functionality (basic sensing device, sampling, electric drive, ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Portable hand-held device for determining the water level and for depth sounding up to 200 m // Fine mechanical, fully automatic measurement procedures // Mechanical counter to display the groundwater level in m and cm // Light weight and compact design ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Mobile Pocket handset to determine the water level to a depth of 15m in monitoring wells from Ø 1" // Optical and acoustic signal upon contact with water // Extendable functionality (basic button, saltwater probe cap etc.) ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Portable hand-held device for determining the current water level and the water temperature in water depths up to 500 m and sounding pipes from Ø 1" // Membrane keypad with backlit LCD to display temperature // Optical and acoustic signal on contact with water // Robust aluminum support frame ...
-
Manufactured by K. R. Instrumentsbased in INDIA
The Well Sounder 2010 PRO is a sonic water level meter, designed and manufactured by Eno Scientific, to measure static water level in wells. This portable handheld unit uses sound waves to measure the distance from the top of the well to the water level. This eliminates the need to lower anything into the well, preventing ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
High-Performance Data logger with a total of 100 configurable analogue and digital input channels // 2 GB SD Flashcard for approximately 50 Million measurements // Compact, aesthetic plastic casing for wall mounting // Large 320 x 240 (3,5") TFT-Color-Display with membrane keypad for easy configuration and operation of the NetLogCom // Display of time series in graphical form (hydrograph, list) ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Mobile field laboratory with electric cable contact gauge for measuring the water level, temperature and other water quality parameters (e.g. oxygen, pH, conductivity, redox potential, turbidity) in groundwater and surface waters // SEBA Plug-in System for coupling with SEBA multiparameter sondes of the MPS-D3/D8/K16 // Printed tubular ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Robust, pluggable multi-parameter sensor from 1.4439 stainless steel to accommodate up to eight sensors (water level, temperature, conductivity, pH, redox potential, oxygen, turbidity, etc.) // Additional electric contact gauge function combined with KLL-Q-2 mobile field laboratory // Slim design (Ø 48mm, 493 mm length), can be used with 2" and larger pipe diameters // Output: RS485 (SHWP), ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you