Hazard Monitor Equipment In USA
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
precise air quality and meteorological data in real-time. Our sensor products have been used in fenceline/community monitoring, pollution source screening, wildfire/smoke monitoring, and smart city ...
-
Manufactured by 4B Groupbased in USA
The T500 Elite Hotbus is a serial communications system designed to monitor up to 256 sensors for combined belt alignment, belt speed, continuous bearing temperature, pulley alignment, level indication (bin / silo) and plug conditions on bucket elevators and conveyors. With automatic machine shutdown capability and PLC / PC ...
-
by Solvias AGbased in SWITZERLAND
The SAM GC-600 Chemical Hazards Monitor is a high-performance analyzer that is based on gas chromatograph technology. It was developed specifically for continuous chemical hazards monitoring, and is used where highly toxic or carcinogenic substances may be present in the production-plant air or in the workplace. Based on its high ...
-
Manufactured by Electro-Sensors, Inc.based in USA
For years a large percentage of the expense of a hazard monitoring system has been the labor and material costs associated with the installation of conduit and wiring. Our field-proven HazardPRO™ Wireless Hazard Monitoring System was designed from the ground-up to provide turnkey, reliable, and consistent protection for ...
-
Manufactured by 4B Groupbased in USA
Hazardmon is a secure hazard monitoring solution, which provides status notifications and data logging for bucket elevators and conveyors. It works with 4B's IE-Node, Watchdog Super Elite and T500 Elite hazard monitors, taking various inputs including belt speed, belt alignment and bearing temperature sensors. All of this ...
-
Manufactured by Electro-Sensors, Inc.based in USA
The Electro-Sentry 1 is a hazard monitoring system commonly used on grain elevator legs or conveyors to monitor critical points for shaft slowdown, bearing temperature, and belt alignment as part of a predictive maintenance program to protect against catastrophic breakdowns and machinery failure resulting in product waste, machinery ...
-
Manufactured by 4B Groupbased in USA
The Watchdog Super Elite (WDC4) is easy to install and simple to set-up. The system processes signals from sensors for belt misalignment, belt speed & slip, continuous bearing temperature, pulley misalignment and plug conditions for bucket elevators or belt conveyors. When an alarm is detected it will sound an alarm and provide shutdown control of the elevator/conveyor and feeding ...
-
Manufactured by Rolfes @ Boonebased in USA
The BTX Smart Monitor combines Rolfes@Boone’s decades of hazard monitoring experience along with the latest technology and a versatile, scalable, and reliable commercial platform. Featuring an intuitive touch screen graphic display backed by robust PLC technology and functionality, the BTX Smart Monitor will empower your ...
-
Manufactured by Ross Manufacturing Co,Inc.based in USA
The M300 Slipswitch is a simple inductive shaft speed monitoring device. The self-contained unit has a single set point, which signals when the shaft speed has dropped by 20% of normal running speed. It is used for detecting dangerous slow downs and underspeed on conveyors, bucket elevators, airlocks, mixers, fans, grinders and many other ...
-
Manufactured by Ross Manufacturing Co,Inc.based in USA
The Mag-Con (MAG2000) is an optional magnetic connector that screws onto the Whirligig and magnetically couples it to the shaft being monitored. The Mag-Con is made from stainless steel, has a holding force of over 150 lbs. and can withstand speeds up to 300 RPM. ...
-
Manufactured by Ross Manufacturing Co,Inc.based in USA
The M800 Elite Speed Switch is designed to detect belt slip, belt underspeed, stop motion, low speed or zero speed on bucket elevators, conveyors, airlocks, mixers, fans, grinders and many other rotating machines. Totally sealed and simple to calibrate, the M800 Elite works in the harshest of ...
-
Manufactured by 4B Groupbased in USA
The X400 Elite is a microprocessor controlled low cost alarm indicator panel for use with level indicators, hazard controls and limit switch sensors. The X400 accepts signals from different sources in up to 8 zones, and is able to cause alarm and shutdown of the machine when an alarm condition has been detected. Alarm and status LEDs on the ...
-
Manufactured by 4B Groupbased in USA
The A400 Elite Trackswitch belt misalignment monitor uses 4B WDA or BAP magnetic proximity sensors to monitor the alignment of the belt in bucket elevators. Each control unit incorporates two independent monitoring circuits for early detection of belt misalignment on one or two bucket elevators. The 4B magnetic reluctance sensors operate in ...
-
Manufactured by 4B Groupbased in USA
The Industrial Ethernet Node (IE-NODE) is a remote monitoring interface designed to provide sensor data to PLC’s or other automation and control systems. Both units can be expanded to 16 sensor inputs with the installation of optional expansion ...
-
Manufactured by 4B Groupbased in USA
Low cost alarm/indicator controller for use with PTC temperature sensors. The T400 ELITE is a microprocessor controlled unit which works in conjunction with PTC temperature sensors to monitor up to 48 bearings and can cause alarm and shutdown of the machine when alarm conditions are detected. The control unit is housed in a self contained ...
-
Manufactured by 4B Groupbased in USA
The B400 Elite Beltswitch belt misalignment monitor uses 4B Touchswitch sensors to monitor belt alignment in bucket elevators and conveyors. Each control unit incorporates two independent monitoring circuits for early detection of belt misalignment on one or two bucket elevators / conveyors. The 4B Touchswitch is an electro-mechanical limit ...
-
Manufactured by 4B Groupbased in USA
machine when hazardous conditions are detected. There is a total of 2 Alarm and 2 Stop relays. The control unit is housed in a self contained wall mounting enclosure. A test push button on the lid of the control unit provides for full system verification. Alarm and status LEDs provide means of quick location of the alarm condition, and voltage free ...
-
Manufactured by 4B Groupbased in USA
The T500 Elite Hotbus™ is a serial communications system designed to monitor up to 256 sensors for combined belt alignment, belt speed, continuous bearing temperature, pulley alignment, level indication (bin / silo) and plug conditions on bucket elevators and conveyors. With automatic machine shutdown capability and PLC / PC ...
-
Manufactured by 4B Groupbased in USA
The Watchdog™ Elite is a microprocessor controlled unit with combined belt speed, belt alignment, bearing temperature, pulley alignment and plugged condition monitoring for bucket elevators and conveyors. An LCD screen displays machine status messages (available in four different languages) and a super-bright LED display shows belt ...
-
Manufactured by Spectra Scientific, Inc.based in CANADA
The Drager Hand Pump is the cost-effective choice for environmental needs. Utilizing Colorimetric Tubes for a large variety of gases, this is the fast and effective chioce for technicians working in gas detection. Over 500 types of gases and vapor tubes are represented, built for ease of use in Industrial workplaces and Remediation sites. Gas Detection Pumps are simple and effective methods for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you