Hazardous Materials equipment in Poland

  • P-Henkel - Model UN-BOXX aero + UN-BOXX max aero - Hazardous Material Bins

    Admissible as packaging in accordance with packing instruction P207 according to special provisions for packaging PP 87 – the special provisions: 327, 625, 190 and 344 must be observed. Additional equipment: Means for absorbing free liquids that may be released in transport.

    By P. Henkel GmbH Distributor in Milomlyn, POLAND. from Large Waste Containers Product line

  • P. Henkel - Model UN-BOXX + UN-BOXX max - Containers for Solid Hazardous Materials

    Admissible as packaging in accordance with packing instruction P002 and derived for solid hazardous materials of packaging groups I, II and III. Additional equipment: none

    By P. Henkel GmbH Distributor in Milomlyn, POLAND. from Large Waste Containers Product line

  • Premium

    UNTHA - Model RS50/60/100 - Industrial Shredders and Shredding Systems

    Industrial shredders and shredding systems for difficult applications. The mature four-shaft shredder that has been tried and tested under difficult conditions is characterized by very high reliability, ability to handle non-shreddable extraneous materials as well as a very broad application range. Its sturdy design and the strong, resistant ...

    By UNTHA Shredding Technology Office in Kraków, POLAND. from Industrial Shredders Product line

  • Premium

    JCT - Model JES-301E1SVZ - Gas Sampling Probe

    Applications: Representative continuous gas sampling in processes containing dust and humidity. Installation in Ex-zone 1, 2 or 21, 22. Hazardous gases. Pressurized processes. Extractive gas analysis. Emission (CEMS) and process Monitoring. Removal of dust from the sample gas.

    By JCT Analysentechnik GmbH Office in POLAND. from Ex-approved Product line

  • Premium

    ORWAK - Model FLEX 5030-N HD - Robust and Reliable Compactor

    The 5030-N HD model has a special application for safe compaction of hazardous waste (glass/cans/tins containing residual paint or chemicals) directly into drums. A steel pallet is included for stable placement of the drum inside the compactor.

    By Orwak AB Office in Lodz, POLAND. from Orwak Flex Product line

  • FAST-ACT - Model FG015-1840-00NS - Chemical Hazard Containment and Neutralization System

    AST-ACT (First Applied Sorbent Treatment Against Chemical Threats) is a chemical hazard containment and neutralization system for liquid and vapor chemical spills and releases. FAST-ACT Decon Mitt allows for safe and easy wiping and handling of chemical spills and neutralized industrial materials. FAST-ACT Decon Mitt is available for individual ...

    By Fast-ACT Distributor in Zielona Góra, POLAND.

  • FAST-ACT - Chemical Hazard Containment and Neutralization System

    Proprietary Formulation: FAST-ACT is a proprietary formulation of non-toxic high-performance specialty materials effective at neutralizing a wide range of toxic chemicals with the added capability to destroy chemical warfare agents.  The FAST-ACT formulation is non-flammable, non-corrosive, and significantly reduces both liquid and vapor ...

    By Fast-ACT Distributor in Zielona Góra, POLAND.

  • Premium

    UNTHA - Model S120 - Shear Shredder/ Rotor Shear

    Reliable pre-shredder for difficult applications. The S120 is one of the most innovative pre-shredders in its class. A sophisticated cutting strength distribution system ensures that the cutting tooth briefly receives up to 70% more cutting strength for materials with highly variable cutting strength requirements (e.g. thick-walled metal pieces). ...

    By UNTHA Shredding Technology Office in Kraków, POLAND. from Industrial Shredders Product line

  • Removal Of Organic Pollutants

    In the ATON-HT company it has been worked out a microwave, mobile installation which is to remove organic impurities effectively from mineral materials (like ceramic elements, soil, etc.). ATON 200 HR reactor has wide application in the utilization of hazardous wastes. After the purification these materials can be used without any danger for the ...

    By ATON-HT S.A. based in Wroclaw, POLAND.

  • Premium

    ORWAK - Model FLEX 5010-E - Small Tough Baler

    The 5010-E model is a small but tough baler that requires little space. Feeding material into this top-loading baler is fast and convenient. Press force: 3 ton. Bale weight cardboard/plastic: up to 60 kg/80 kg.

    By Orwak AB Office in Lodz, POLAND. from Orwak Flex Product line

  • Premium

    UNTHA - Model RS150 - Industrial Shredder for Scrap Metal Shredding

    The RS150 is the largest UNTHA heavy duty four-shaft shredder and has been developed for especially difficult applications where a high throughput performance, high availability and low maintenance cost are all required. The highlight of this unique innovation is the newly designed UNTHA Eco Drive. The dynamic and energy-efficient drive concept ...

    By UNTHA Shredding Technology Office in Kraków, POLAND. from Industrial Shredders Product line

  • Premium

    Environnement S.A. - Multigas Dilution System

    Ideal for mid-high to high concentrations or for sampling locations in hazardous areas.

  • ElastoSeal - Model EPDM - Geomembrane

    Rubber possesses unique properties and it has proven itself for many years. The material provides an effective and durable membrane with high resistance to chemicals. It has a unique ability to withstand mechanical stresses in the form of pressure and movements. This provides unique benefits as a geomembrane that will be exposed to settlements and ...

    By SealEco AB Office in Łódź, POLAND. from Geomembrane Product line

  • Neutra Separation Technology

    Systems for treating wastewater containing oily contaminants: Neutra separators have been tested to DIN 1999 / EN 858. They meet the requirements of class I (KW < 5 mg/l) or class II (KW < 100 mg/l), respectively. High quality materials and practical designs facilitate the monitoring, servicing and emptying of Neutra separator systems.

    By Mall GmbH Office in Krapkowice, POLAND.

  • Seperators for Treating Wastewater Containing Oily Contaminants

    Neutra separators have been tested to DIN 1999 / EN 858. They meet the requirements of class I (KW < 5 mg/l) or class II (KW < 100 mg/l), respectively. High quality materials and practical designs facilitate the monitoring, servicing and emptying of Neutra separator systems.

    By Mall GmbH Office in Krapkowice, POLAND.

  • PANAREA - Model 7000 - Full Face Mask

    PANAREA 7000 is a high quality full-face mask used by professionals for many different applications. The face part is made of silicone, which makes PANAREA particularly soft and is extremely flexible at high and low temperatures. High-quality materials and careful workmanship ensure the mask’s durability, which makes PANAREA an extremely ...

    By Filter Service Sp. z o.o. based in Zgierz, POLAND. from Gas Masks and Full Masks Product line

  • HORIBA - Model MESA-50 - X-Ray Fluorescence Analyzer

    HORIBA has been selling the XGT-WR series of EDXRF analyzers for many years, to providing screening measurements of samples containing hazardous elements such as Pb, Cd, Hg, Cr, Br, Sb, As for RoHS, ELV, and Cl for halogen free applications. XGT systems are used daily throughout the world. HORIBA has now developed the new MESA-50 EDXRF analyzer, ...

    By HORIBA Europe GmbH Office in POLAND. from Scientific Product line

  • Premium

    ORWAK - Model 5030 - Classic Waste Compactors

    The in-bag 5030 compactor was the very core of our business during the pioneering years of the 1970s. This versatile, sturdy and easy-to-use unit is still going strong and offers hygienic compaction of mixed waste. The compaction ratio of up to 10:1 is impressive!

    By Orwak AB Office in Lodz, POLAND. from Orwak Flex Product line

  • Premium

    ORWAK - Model FLEX 4110 - In-bin-Compactor

    The 4110 model is an in-bin compactor that suits standard bins from 600-1100 L. It is ideal for hygienic compaction of bagged mixed waste. The 4110 is based on easy wheel-in, wheel-out operation and a clever lifting device protects the bin wheels during compaction. It offers maximum personal safety both for the operator and people in the vicinity.

    By Orwak AB Office in Lodz, POLAND. from Orwak Flex Product line

  • Premium

    ORWAK - Model FLEX 4240 - Robust and Reliable Machine

    Compact general waste in 240 l bins in our new waste compactor FLEX 4240! It is a robust and reliable machine with a compact and lightweight design. The 4240 is easy, safe and convenient to use! The multiple-chamber unit offers a top-loading setup, while the single-chamber version is based on the principle “Roll in! Compact! Roll out!” ...

    By Orwak AB Office in Lodz, POLAND. from Orwak Flex Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you