Showing results for: Health And Safety Regulation Equipment Available In Eritrea
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
your unique needs and operating requirements. We can assist you to keep your processing units running at an optimal level, maximising your production in compliance with health and safety regulations and environmentally-conscious ...
-
PremiumManufactured by Bunting - Redditchbased in UNITED KINGDOM
Forklift Stabilising Magnets are designed to retain sheet steel loads, holding them against the forks during lifting or transportation. The magnet system is constructed from low carbon steel. The former wound copper magnet coil is fixed into the magnet system & encapsulated in resin to insulate, protect from impact and prevent ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN lightweight CPT penetrometer set is an economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
Ultra-compact and extremely easy to use – the AQUASCAN 620L laptop correlator utilizing both the legendary, industry-leading cordless AQUASCAN sensor-transmitters and the powerful “Auto Filter” ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Nearshore cone penetration testing is not as difficult as it might seem. In case of nearshore CPT (also referred to as over-water or marine CPT) the specifications of the equipment, the operation and the procedures to follow differ slightly from land testing. It is for reason recommendable to opt for a CPT penetrometer rig that has been purposely designed for this ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
A 200 kN trailer-based CPT penetrometer rig is a lightweight and economical rig with full CPT testing capabilities. It is suitable for both electrical and mechanical CPT testing. It can be towed easily by a 4-wheeldrive car. It comprises a sturdy 2-axle trailer base, a 2-cylinder CPT penetrometer pusher, a diesel-hydraulic power-pack with load-sensing pump, manually operated valves, a work ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The “economic” 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The only difference with the “basic” 200 kN CPT crawler is the fact, that the working cabin is made of tarpaulin, as where the “basic” crawler features a working cabin made of insulating sandwich panels. The rig has been designed to execute soil mechanical research ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The Remote Carbon Dioxide (CO2) Storage Safety Alarm is designed to protect customers and workers near stored carbon dioxide (CO2). The safety monitor measures carbon dioxide levels and detects leaks protecting facilities from over exposure to hazardous ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT truck is a CPT penetrometer rig based on a truck-chassis. The CPT truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT truck, either an electrical or mechanical probe (called a cone) is pushed into the ground and the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN stand-alone CPT penetrometer set is a lightweight and economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN multi-purpose CPT penetrometer platform is an economical skid-based rig with full CPT testing capabilities. It comes with CW-couplings for quick and easy attaching to a hydraulic excavator. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. It is designated as being a “basic” rig, since it lacks the electronically controlled hydraulics and remote control which comes with the “professional” 200 kN CPT crawler. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 150 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
-
Manufactured by Turnkey Instruments Ltdbased in UNITED KINGDOM
The Simret 3000 brake tester simplifies the routine testing of heavy vehicle, locomotive and braking systems to ensure compliance with Health and Safety Regulations. Simret was developed in conjunction with the Health and Safety Executive over 10 years ago and is now the de-facto standard for instrumented brake ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Truly robust crawler-based CPT penetrometer pushing rig with rubber tracks, Hatz 3-cylinder diesel engine incorporated in a sound insulating enclosure, load-sensing hydraulic pump, a 200 kN CPT penetrometer pusher, unique anchoring system on reaction arm. Practically all functionalities are controlled by means of a wireless remote control. The Griffin 200 kN is made of the highest quality ...
-
based in USA
Maintaining a facility’s compliance with federal, state and local environmental, health and safety (EHS) regulations can be a daunting task. The complexity of the regulations combined with inevitable employee turnover can result in missed regulatory required actions and/or deadlines. This will often result in a Notice of ...
-
based in GERMANY
devices and welding units – with test sequences per VDE 0701-0702, IEC/EN 62353 (VDE 0751) und IEC/EN 60974-4 (VDE 0544-4). The set is especially well suited for testing tasks within the context of health and safety regulation and German medical device directive, which permit professional logging of test objects and documentation of the ...
-
Manufactured by GIA Premix FIbased in FINLAND
emergency showers offer a versatile and effective solution for quick decontamination in industrial, laboratory, or educational settings, ensuring safety and compliance with health and safety ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
, enabling organizations to gain better stock and inventory control and tank level measurement that complies with health and safety ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you