We couldn't find any heat exchangers equipment suppliers or service providers located in Marshall Islands

Here is a list of equipment results with suppliers serving Marshall Islands

Heat Exchangers equipment available in Marshall Islands

  • Premium

    GIG Karasek - Heat Exchangers

    Our comprehensive portfolio includes tubular heat exchanger with a pipe length up to 24m in various embodiments - from conventional exchangers to specialized equipment, tailored to customer requirements. Our experienced team works with modern weld- and roll Equipment and because of our in-house process Technology you can choose between exchangers ...

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA. from Special Process Equipment Product line

  • Premium

    CPI - Plate & Frame Heat Exchanger

    CPI has expanded the success of our FLOATING TUBE HEAT EXCHANGER towards the development of our Plate and Frame Heat Exchanger. The Plate and Frame Heat Exchanger’s we design and manufacture are robust designs that routinely see high temperature service. These systems can provide high thermal rate efficiency in typically smaller footprints ...

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA). from Heat Exchangers Product line

  • Premium

    CPI - Floating Tube Heat Exchanger

    CPI manufactures a revolutionary shell and tube heat exchanger. The Floating Tube Heat Exchanger is standard equipment in our Quadrant SR and SRS Series Thermal Oxidizer’s and has found success in other heat recovery applications. The Floating Tube Heat Exchanger is unlike any shell and tube heat exchanger. It is specially designed to be ...

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA). from Heat Exchangers Product line

  • Premium

    CPI - Fluid Heating Heat Exchanger

    CPI has expanded upon our success of our shell and tube heat exchangers and plate and frame heat exchanger by developing expertise with several fluid heating mediums. Many applications can benefit from the use of additional heat recovery techniques. In many cases, fluid heating systems represent very efficient recovery methods. Catalytic Products ...

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA). from Heat Exchangers Product line

  • Premium

    ennox biogas - Model HE-sw - Sludge Heat Exchanger

    For the heat exchange in sludge in waste water/sludge treatment systems as well as biogas installations, our heat exchanger sludge/water HE-sw is used, which has been uniquely developed for the waste water sector.  A turbulent sludge circulation is generated by an innovative turning chamber construction. The temperature profile is balanced ...

    By ennox biogas technology GmbH based in Hard, AUSTRIA. from Digester Equipment Product line

  • Premium

    CPI QUADRANT - Model 6.60 - Floating Tube Heat Exchanger

    We have available one of our revolutionary FLOATING TUBE Heat Exchangers. This unit is capable of handling up to 6,000 scfm, and delivers a 60% thermal efficiency. It was designed to be mounted on top of one of our thermal oxidizers, but can be modified to fit a number of other configurations.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA). from Pre-Owned Equipment Product line

  • Premium

    Model WT - Double-Pipe Heat Exchanger

    Our double-pipe heat exchanger WT can be Used for heat exchange on biogas and waste water treatment plants. Energy efficient Means of counter current process is heated evenly, the medium and the process flow back out. Performed and interpreted the design and construction we Customised, this Guarantees a Cost-Effective and execution. Our WT is ...

    By Bilgeri EnvironTec GmbH based in Fussach, AUSTRIA. from Digester Equipment Product line

  • Premium

    GE - Exhaust Gas Heat Exchangers (EGHE)

    Exhaust gas heat exchangers (EGHE) utilise waste heat from the exhaust of the GE's Jenbacher gas engine cogeneration plant. They are typically located adjacent to the engine or are mounted on the roof of a containerised co

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Waste Heat Recovery for Ancillary Equipment Product line

  • Platevarem - Model SMALL T1 - Heat Exchangers

    AISI 316 Stainless steel plates.Stainless steel socket.Plates 35

    By Varem S.p.a. based in Limena Padova, ITALY. from Plate Heat Exchangers Product line

  • HRS - Model G Series - Heat Exchanger

    The G series heat exchanger is a specially designed heat exchanger for thermal energy recovery from exhaust gases. Its design is based on the traditional K Series but with dimensions optimized for exhaust gas cooling applications. The G series has corrugated inner tubes, ensuring higher heat transfer ratios than smooth tube designs. This means ...

    By HRS Heat Exchangers based in Lorquí - Murcia, SPAIN. from Corrugated Tube Heat Exchangers Product line

  • MEDIUM - Model T2 - Heat Exchanger

    AISI 316 Stainless steel plates.Stainless steel socket.Plates min. 9 – max. 65.

    By Varem S.p.a. based in Limena Padova, ITALY. from Plate Heat Exchangers Product line

  • Model TK series - Heat Exchangers

    The TK series heat exchangers, equipped with an integrated surge tank, are used to cool down closed-circuit hydraulic installations.

    By Emmegi S.p.A. based in Cassano d`Adda (MI), ITALY.

  • ATTSU - Model IVL - Heat Exchanger

    The IVL is a heat exchanger specifically designed for heat all kind of liquid with steam.

    By ATTSU TERMICA S.L. based in Cerla, SPAIN. from Other Steam Equipment Product line

  • Heat Exchangers

    Heat Exchangers are manufactured in accordance to Design conditions,Process Fluids requirements and relative materials. Industries served: Oil & Gas , Petrochemical, Refining, Energy and Chemical

    By Onpro AG based in Frenkendorf/Basel, SWITZERLAND. from Oil &Gas, Petrochemical, Refining, Energy & Chemical Industrie Product line

  • Klean-Wall - Heat Exchanger

    Across industry lines, saving energy is a huge problem for many organizations, and heat exchangers were designed to utilize as much of that energy as possible, but they’re not always quite as efficient as they could be. Komax Systems, though, has implemented state of the art technology to the world of heat exchangers, providing you with the ...

    By Komax Systems, Inc. based in Huntington Beach, CALIFORNIA (USA). from Other Products Product line

  • Metropolitan - Heat Exchangers

    At Metropolitan Industries, we’re able to offer a large selection of both Shell & Tube and Heat & Frame heat exchangers for commercial, industrial, and speciality applications. Typical applications include HVAC, domestic hot water, chillers, domestic heating, and heat recovery. Our heat exchangers are available in multiple ...

    By Metropolitan Industries, Inc. based in Romeoville, ILLINOIS (USA). from Hydronic Systems Product line

  • Heat Exchangers

    In partnership with Hydro and NTNU (Norwegian University of Science and Technology), Fives has developed and implemented very efficient heat exchangers with low fouling. In Fives’ heat exchanger, fumes circulate perpendicularly to the tube axle while cooling liquid circulates inside finned tubes.

    By Fives Group based in Paris, FRANCE. from Gas Cooling Product line

  • Heat Exchangers

    During the filtration of the exhaust air the recovery of process heat can be achieved by the integration of a heat exchanger. Industrial exhaust air contains often valuable heat, which can be used for follow-up processes. In the case of low exhaust air temperatures the heat recovery can be optimised by the combination with the KMA Ambitherm® ...

    By KMA Umwelttechnik GmbH based in Koenigswinter, GERMANY. from Other Products Product line

  • Kenics - Heat Exchangers

    Kenics® Static Mixer technology, available exclusively in Kenics® Heat Exchangers, offers the highest available coefficients for fast, uniform heat transfer. Capable of reliable operation in a wide range of process applications, including those in the polymer, plastic, and food and beverage industries, Kenics Heat Exchangers require less ...

    By National Oilwell Varco based in Dayton, OHIO (USA). from Kenics Product line

  • Flex Turbine - Model GT1300S - Heat Exchangers

    Integrating four (4) Flex Turbine GT333S into a single ISO container, the Flex Turbine® GT1300S provides a cost-effective energy solution for larger capacity energy projects. The Flex Turbine® GT1300S keeps the Flex Turbine® broad fuel flexibility, machine durability, and efficient full to part-power efficiency. Built-in redundancy ...

    By FlexEnergy Inc based in Portsmouth, NEW HAMPSHIRE (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you