heat recovery Equipment in Pennsylvania

  • Premium

    ABUTEC - Heat Recovery Unit

    Do you have a use for the waste gas being burned? Can you increase your plant’s efficiency by using waste heat? ABUTEC can engineer systems capable of giving you the heat! Contact us today to discuss your needs. Typical configurations include either utilizing the flare stack as a heat transfer / heat exchanger or transferring up to 100 ...

    By AEREON Office in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Heat Recovery Steam Generators (HRSG)

    Obtaining and maintaining plant efficiency is critical to the economic well-being of your power plant. To achieve optimum performance, all integrated parts must work together fluidly, providing maximum output.

    By Innova Global Limited. Office in Pittsburgh, PENNSYLVANIA (USA). from Heat Recovery Systems Product line

  • Waste Heat Recovery Boilers

    Indeck offers years of experience utilizing waste gases and recovering its energy in the form of steam. Steam generation is an ideal way to recover waste heat energy from these gases in a form most easily utilized. Enormous quantities of heat energy inherent in exhaust gases from various industrial processes can be recovered to reduce energy ...

    By Indeck Power Equipment Company Office in Erie, PENNSYLVANIA (USA). from Boilers Product line

  • Strobic Air - Ventilation Heat Recovery Systems

    Heat recovery ventilation systems by Strobic Air provide energy conservation on laboratory fume hood exhaust systems. Unique glycol/water heat exchanger coil modules for Tri-Stack® systems extract exhaust heat for heating or cooling conditioned makeup air. (A 1°F rise in makeup air temperature permits a corresponding 3% reduction in ...

    By Strobic Air Corporation - a CECO Environmental Company based in Harleysville, PENNSYLVANIA (USA).

  • Premium

    Waste Heat Boilers

    Let nothing go to waste. Innova can custom-design a Waste Heat Boiler system that is guaranteed to reduce energy consumption for years to come. Whether you require waste heat boilers for your refinery, process or hot flue gases, our engineers work with you to design a cost-effective WHB system that is tailored to your specific needs.

    By Innova Global Limited. Office in Pittsburgh, PENNSYLVANIA (USA). from Heat Recovery Systems Product line

  • Combined Cycle Heat Exchanger

    Combined cycle heat recovery projects are an ideal application for the HeatSponge design. The fundamental geometry of the HeatSponge finned tube was designed for optimizing performance at relatively low flue gas back pressures available on most industrial boilers. This provides an ideal foundation for larger combined cycle heat recovery ...

    By Boilerroom Equipment, Inc (BEI) based in Export, PENNSYLVANIA (USA).

  • RENTECH - Waste Heat Boilers

    RENTECH boilers are custom designed for each unique application. If your project requires a boiler, heat recovery steam generator, wasteheat boiler, fired packaged watertube boiler or other specialty boiler, you can depend on RENTECH to deliver a complete engineered solution.

    By Klaus Equipment Company (KEC) based in Gibsonia, PENNSYLVANIA (USA).

  • Calgon Carbon Filtrasorb - Model 816-M - Gold Recovery Granular Activated Carbon

    FILTRASORB 816-M is a granular activated carbon (GAC) developed by Calgon Carbon Corporation for the removal of contaminants from municipal drinking water. These contaminants include taste and odor compounds such as MIB and Geosmin, organic compounds known to be precursors to disinfection byproduct (DBP) formation, DBP compounds such as haloacetic ...

    By Calgon Carbon Corporation based in Pittsburgh, PENNSYLVANIA (USA). from Water Treatment Activated Carbons Product line

  • Green-Save - Hi-Panex Series Heat Wheel

    The Hi-Panex heat wheel is manufactured by winding flat and corrugated sheets of high quality aluminum substrate to form a fluted “honeycomb' structure. The corrugated flutes provide strong support, while the interleafed flat sheets prevent nesting or collapsing of flutes. The face of the wheel is ground and polished to form a smooth surface ...

    By SG America based in Wyomissing,, PENNSYLVANIA (USA).

  • Premium

    Gas Turbine Bypass Systems

    A gas turbine bypass system diverts flue gases from the Heat Recovery Steam Generator (HRSG) in combined cycle mode to a bypass stack with a silencer assembly to operate in simple cycle mode. Maintenance can then be performed on the HRSG as the diverter isolates it completely from the gas turbine.

    By Innova Global Limited. Office in Pittsburgh, PENNSYLVANIA (USA). from Gas Turbine & Recip Engine Applications Product line

  • Premium

    AEREON - Model RTO - Recuperative Thermal Oxidizers

    Recuperative Thermal Oxidizers are complex incineration systems that employ exchangers, boilers, or hot oil heaters to recover energy from high temperature flue gases. These systems can utilize a recuperative system to minimize fuel gas consumption, allowing for economical operation. Moreover, this type of equipment is ideal for sensitive areas ...

    By AEREON Office in Canonsburg, PENNSYLVANIA (USA). from Enclosed Vapor Combustion Systems Product line

  • NacahTech - Direct Fired Thermal Oxidizer for Asphalt Application

    Custom sizing. Accommodate unique process requirements. Tank fumes abated. Railcar and truck loading treatment. Combine with process converters to minimize fuel consumption. Waste heat recovery to heat flux or maintain tanks. Manage heat to avoid overheating plant/tanks. Provide steam if/when needed. Help prevent unwanted or unforeseen shutdowns ...

    By Nacah Tech LLC based in Pittsburgh, PENNSYLVANIA (USA).

  • NESTEC - Regenerative Thermal Oxidizers (RTO)

    The Regenerative Thermal Oxidizer (RTO) converts Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) to carbon dioxide and water vapor through thermal oxidation. RTOs use regenerative heat transfer to achieve very high thermal efficiencies, which results in very low fuel cost. Through flow reversal, process gas is alternately ...

    By NESTEC, Inc. based in Douglassville, PENNSYLVANIA (USA). from VOC and HAP Control Systems Product line

  • Thermal Oxidizers

    lndeck's Boiler/TO design eliminates the need for separate equipment such as Boilers, Thermal Oxidizers, Heat Recovery Steam Generators and their associated controls, pumps and piping equipment. In the conventional approach, all of these separate pieces of equipment and systems are necessary to destroy VOC's, generate steam and recapture waste ...

    By Indeck Power Equipment Company Office in Erie, PENNSYLVANIA (USA). from Boilers Product line

  • NacahTech - Custom Designed Thermal Oxidizers

    If one or more of the following parameters apply, a custom thermal oxidizer is likely the best solution for air pollution control/ treatment: Flow changes. Particulate concern. N-bearing compounds. S or Halogen presence. High DRE required. Fluctuating flow rates. Fluctuating VOC or heat content of waste/off gas. Plant requires post-combustion APC. ...

    By Nacah Tech LLC based in Pittsburgh, PENNSYLVANIA (USA).

  • Model 1.0 SCH - Mobilair Portable Dust Collectors

    The MAX MOBILAIR-1.0 SCH offers high filtration efficiencies with the convenience of portability. With the articulated pick up arm, this unit can be moved as the workflow dictates. This has been conceived for the control of smoke, dust & other airborne contaminants. The filtered air can be returned right back into the work place acting as a ...

    By Air Dynamics Industrial Systems Corp. based in York, PENNSYLVANIA (USA). from Dust Collector Systems Product line

  • NESTEC - Catalytic & Regenerative Oxidizers Systems

    The NESTEC, Inc. catalytic oxidizers use both precious and base metal catalysts, depending upon the application. For systems using a beaded base metal catalyst our design utilizes a tray arrangement with a gas hourly space velocity of around 14,000. The above schematic shows how we segregate the trays to uniformly distribute the airflow through ...

    By NESTEC, Inc. based in Douglassville, PENNSYLVANIA (USA). from VOC and HAP Control Systems Product line

  • NESTEC - Recuperative Thermal Oxidizers

    The Thermal Oxidizer (TO) converts Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) to carbon dioxide and water vapor through thermal oxidation. When required, the TO is provided with a heat exchanger designed to recover thermal energy from the oxidation process.

    By NESTEC, Inc. based in Douglassville, PENNSYLVANIA (USA). from VOC and HAP Control Systems Product line

  • Fresh Air Exchange Systems/HRV"S

    Even if you don’t live in an ultra-efficient home, you have probably spent some time recently weather stripping doors and windows, caulking around frames, filling walls and attics with insulation. As a result, you’ve cut your heating and air conditioning costs.

    By Air Care and Restoration Co. based in Bethlehem, PENNSYLVANIA (USA).

  • Esco CelCulture - Model CO2 - Incubators

    Introducing Esco CelCulture - world class CO2 incubators from Esco with the technologies and compliance to prove it. Precise parameter control, robust contamination control with ULPA filtration system and 90°C moist heat decon. cycle, direct heat & air jacket design with 8 heaters grouped into 3 zones, gentle yet effective forced ...

    By Esco Technologies Inc based in Hatboro, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you