Only show results in Connecticut? Ok

hot gas equipment

  • Premium

    AMETEK PI - Model 909 - Hot/Wet Single Gas Mass Flow CEM

    Due to compliance regulations, it is not adequate to simply know the concentration of pollutants in the stack gas emissions. A facility is required to monitor and report the mass emissions (e.g. lb/hr, kgs/day, etc.) of their processes.

    By AMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA). from Western Research Product line

  • Premium

    AMETEK PI - Model 919 - Hot/Wet Single Gas Analyzer

    The 919 is specifically configured for monitoring stack emissions on a concentration basis. With the addition of an optional zirconium oxide sensor, the 919 is capable of monitoring oxygen. Robust and reliable analyzer, the 919 has no-moving-parts, UV-based measurements do not suffer from H2O and CO2 interference. This greatly simplifies sample ...

    By AMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA). from UV Vis Product line

  • Premium

    AMETEK PI - Model 920 - Hot/Wet Multi-Gas CEM

    The 920 is specifically configured for monitoring the stack emissions of multiple pollutants on a concentration basis. It measures as many as five pollutants at stack conditions. With the addition of an optional zirconium oxide sensor, the 920 is capable of monitoring oxygen.

    By AMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA). from UV Vis Product line

  • Premium

    AMETEK PI - Model 910 - Hot/Wet Multi-Gas Mass Flow CEM

    The 910 is specifically configured for monitoring the stack emissions of multiple pollutants on a mass rate basis. It measures stack effluent temperature and velocity in addition to as many as five pollutant concentrations at stack conditions, enabling each pollutant's mass emission rate to be reported. With the addition of an optional zirconium ...

    By AMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA). from UV Vis Product line

  • Hot Gas Filters

    Typical applications for hot gas filter is in gases in which standard filters like bag filters can´t be used due to the high temperature. The cartridges of hot gas filters consist of temperature resistant ceramic fibers. The dust removal from the surface of the filter elements occures by pressurized air impulses and the dust will be ...

    By ENETEX GmbH based in Steinau a. d. Str., GERMANY.

  • Tenmat Firefly - Hot Gas Filters

    Tenmat Firefly Hot Gas Filters are designed to remove particles, acids, heavy metals and dioxins from the flue gases at temperatures higher than those achievable with any conventional system. The filter elements are manufactured from unique refractory materials and inorganic bonds, enabling them to be used at temperatures in excess of 1,000°C. ...

    By Tenmat ltd based in Manchester, UNITED KINGDOM.

  • KVT - Model DRY-FIL - Hot Gas Filters

    We develop sustainable and efficient technologies for industrial pollution control: we are specialized in several filtering systems for many industrial applications. The DRY-FIL brand is a advanced filtration system for high temperature process gases.

    By Kanzler Verfahrenstechnik GmbH (KVT) based in Graz, AUSTRIA. from Products Product line

  • Hot Gas Filtration

    Norafin offers a variety of spunlaced filter media for process liquid and air filtration. The spunlace technology offers various product opportunities and performance advantages not only in liquid, but also in air filtration as for example in hot gas filtration. Thanks to the hydroentangling process, which binds the fibers in a homogeneous and ...

    By Norafin Industries (Germany) GmbH based in Müllheim, GERMANY. from Filtration - Filter Bags Product line

  • Hot Gas Filtration Cartridges

    The filter cartridges are constructed to meet the special requirements of temperatures higher than 140 °C. They are suitable for a maximum operating temperature of 450 °C. Their metal parts are made of galvanized or stainless steel. As filter media needle felts or weaves of stainless steel are used. The cartridges can be cleaned by jet ...

    By R B Filter GmbH based in Langenbrettach, GERMANY. from Filter Elements for Industrial Dust Filtration Product line

  • Venti Oelde - Hot Gas Circulation Fans

    Effective fans for hot processes. Our circulating fans can withstand temperatures of up to 1,000°C and are used for tempering, annealing and hardening furnaces, as well as for core drying. To operate the furnace system economically an even and fast exchange of heat is required. The air cooling system used by Venti Oelde has proved itself again ...

    By Ventilatorenfabrik Oelde GmbH based in Oelde, GERMANY. from Industrial Fans Product line

  • Saubatech - Hot Gas Filtration System

    Multiple industrial processes produce emissions, containing products which are hazardous to people’s health, or pollute the environment. Most countries have instituted regulations that limit these emissions, requiring these gasses to be filtered.

    By Saubatech (Pty) Limited based in Northriding, SOUTH AFRICA.

  • Model CCS-LT - Hot Gas Generators for Low Temperature Applications

    Combustion chambers with refractory brickwork reach their limits as soon as increased heat flow requirements are placed on the downstream process (for example in intermittent operation, if the temperature changes quickly or with short startup and shut-down times). SAACKE offers a series of proven and cost-effective solutions with various designs ...

    By SAACKE GmbH based in Bremen, GERMANY. from Combustion Chambers / Hot Gas Generators Product line

  • Tri-Mer UltraCat - High Temperature Filters for Hot Gas Filtration

    Ceramic filters as industry knows them best are often called “candles” because of their solid tube shape. They have been a staple of air pollution control for decades. The original ceramic filters were manufactured from refractory grains such as alumina and pressed into the basic candle shape – a tube with a closed, rounded ...

    By Tri-Mer Air Pollution Control Systems based in Owosso, MICHIGAN (USA). from Hot Gas Treatment Product line

  • Hot Gas Generator With Patented Secondary Burning Chamber

    Installed firing capacity: Reciprocating grate: 49.9 MW, Granulate burner: 2 x 4.0 MW. Fuel consumption per year: approx. 200,000 t. Fuels: Bark, production wood (MDF, particle board). Range of heat values: 2.1 - 3.2 kWh/kg. Year of commissioning: 2007. Location: Belgium.

    By Richard Kablitz GmbH based in Lauda-Königshofen, GERMANY. from Hot Gas Generators Product line

  • Hot Gas Generator With Patented Secondary Burning Chamber

    Installed firing capacity: Reciprocating grate: 15.0 MW, Granulate burner: 3 x 5.0 MW. Fuel consumption per year: approx. 80,000 t. Fuels: Bark, production wood (MDF), sawdust. Range of heat values: 2.6 - 3.5 kWh/kg. Year of commissioning: 2010. Location: Luxembourg.

    By Richard Kablitz GmbH based in Lauda-Königshofen, GERMANY. from Hot Gas Generators Product line

  • ETG - Model 6903 H - NH3 Hot Wet Gas Monitor

    NH3 Hot wet gas monitor; Ammonia (NH3) extractive gas analyzer tunable diode laser based. Sample hot &wet. 19” Rack mounting. Minimum Standard range 0-20/50/100/500ppm. Maximum Standard range 0-500 ppm. Limit of detection 8ppm. Signal output 4-20 mA. Other technical details please to download the technical bulletin.

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY. from Gas Analyzers Laser based TDL Product line

  • ETG - Model 6904 H - HCl Hot Wet Gas Monitor

    HydrogenChloride (HCl) extractive gas analyzer tunable diode laser based. Sample hot &wet. 19” Rack mounting. Minimum Standard range 0-50/100/500 ppm. Maximum Standard range 0-500 ppm. Limit of detection 8 ppm. Signal output 4-20 mA. Other technical details please to download the technical bulletin.

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY. from Gas Analyzers Laser based TDL Product line

  • Dirt Killer - Model H3612 3500 PSI, 4.2 GPM - Hot Water Gas Pressure Washer

    The H3612 hot water gas pressure washer, producing 3,500 PSI at 4.2 GPM, is for industrial and commercial use; perfect for the professional who cleans construction sites, buildings, vehicles or heavy equipment; powers a large flat surface cleaner; does graffiti or gum removal; engages in contract cleaning, or washes down farm machinery. There ...

    By Dirt Killer Pressure Washers, Inc. based in Baltimore, MARYLAND (USA). from Hot Water Gas Product line

  • Hot Flue Gas Cleaning Equipment

    To keep our environment clean, Filcon Filtration A/S has specialized in the treatment of hot flue gas. Hot flue gas is generated from biomass, gasification or waste incinerators. It may contain high concentrations of the chemical particles that are harmful to humans and the environment. We have installed bag filter systems in plants for the ...

    By Filcon Filtration A/S. based in Korsør, DENMARK.

  • Showcase

    Munters - Zeolite Rotor Concentrator/Oxidizer System for VOC Abatement

    Munters Zeolite Rotor Concentrator/Oxidizer Systems are the leading technology for cost-effective abatement of VOCs (VOC abatement). With hundreds of systems currently in service, Munters installed base includes some of the world's most respected companies in semiconductor manufacturing, automotive and aerospace industries. Munters Zeolite ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Pollution Control & VOC Abatement Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you