We couldn't find any hot gas equipment suppliers or service providers located in Myanmar

Here is a list of equipment results with suppliers serving Myanmar

hot gas equipment available in Myanmar

  • Premium

    Process Combustion - Process Heater With Recirculation

    If you want to improve efficiency and reduce NOx then the addition of hot flue gas recirculation is the answer. Fresh air is introduced through the burner and the equivalent mass of combustion products is exhausted into the atmosphere. The residue products of combustion are recirculated back into the combustion chamber.

    By Process Combustion Ltd based in Harrogate, UNITED KINGDOM. from Process Heater With Recirculation Product line

  • Model DRY-FIL - Hot Gas Filter

    Process gas purification is a staple of chemical and process engineering as well as metallurgy, to remove dusts and other solid matters that could impair performance of downstream catalyst and heat exchangers. The KVT Hot Gas Filtration Unit (DRY-FIL) is temperature-resistant up to 800°C, also in a corrosive atmosphere. In industrial process ...

    By Kanzler Verfahrenstechnik GmbH (KVT) based in GRAZ, AUSTRIA. from Hot Gas Filter Product line

  • Hot Gas Filters

    Typical applications for hot gas filter is in gases in which standard filters like bag filters can´t be used due to the high temperature. The cartridges of hot gas filters consist of temperature resistant ceramic fibers. The dust removal from the surface of the filter elements occures by pressurized air impulses and the dust will be ...

    By ENETEX GmbH based in Steinau a. d. Str., GERMANY.

  • Tenmat Firefly - Hot Gas Filters

    Tenmat Firefly Hot Gas Filters are designed to remove particles, acids, heavy metals and dioxins from the flue gases at temperatures higher than those achievable with any conventional system. The filter elements are manufactured from unique refractory materials and inorganic bonds, enabling them to be used at temperatures in excess of 1,000°C. ...

    By Tenmat ltd based in Manchester, UNITED KINGDOM.

  • Premium

    B&W Megtec - Evaporative Gas Cooling Systems

    MEGTEC’s evaporative gas cooling and conditioning system helps to protect downstream equipment, enhance air pollution control performance, reduce gas volumes and increase production capacity. Our Turbotak atomizing nozzles introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas ...

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA). from Evaporative Gas Cooling Systems Product line

  • Venti Oelde - Hot Gas Circulation Fans

    Effective fans for hot processes. Our circulating fans can withstand temperatures of up to 1,000°C and are used for tempering, annealing and hardening furnaces, as well as for core drying. To operate the furnace system economically an even and fast exchange of heat is required. The air cooling system used by Venti Oelde has proved itself again ...

    By Ventilatorenfabrik Oelde GmbH based in Oelde, GERMANY. from Hot Gas Circulation Fans Product line

  • Saubatech - Hot Gas Filtration System

    Multiple industrial processes produce emissions, containing products which are hazardous to people’s health, or pollute the environment. Most countries have instituted regulations that limit these emissions, requiring these gasses to be filtered.

    By Safurnco (Pty) Limited based in Northriding, SOUTH AFRICA.

  • Premium

    Flue Gas Temperature Control System

    Evaporative gas cooling and conditioning systems help protect your downstream equipment, enhance air pollution control performance, reduce gas volumes, and increase production capacity. Central to our systems are Turbotak atomizing nozzles, which introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or ...

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA). from Flue Gas Temperature Control System Product line

  • Premium

    Codel - Model GCEM40E - Hot Extractive Multi-Channel Gas Analyser System

    The GCEM40E hot extractive multi-channel gas analyser is CODEL’s industry-proven continuous emissions monitor for difficult applications. Designed exclusively for use on a wide range of applications where the flue gas temperature is abnormally high, low or saturated. Three decades of development, knowledge and practical experience have been ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Hot Extractive Multi-Channel Gas Analyser System Product line

  • Premium

    Model 919 - Hot/Wet Single Gas Analyzer

    The Model 919 is specifically configured for monitoring stack emissions on a concentration basis. With the addition of an optional zirconium oxide sensor, the Model 919 is capable of monitoring oxygen. Robust and reliable analyzer, the Model 919 has no-moving-parts, UV-based measurements do not suffer from H2O and CO2 interference. This greatly ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Hot/Wet Single Gas Analyzer Product line

  • Tri-Mer - Efficient Hot Gas Ceramic Filters

    The main advantage: Advanced control of SO2, HCl and NOX in one system. Ceramic filters, often called 'candles' because of their solid tube shape, have been used in pollution control for decades. The original ceramic filters were manufactured from refractory grains such as alumina and pressed into the basic candle shape—a tube with a closed, ...

    By Tri-Mer Corporation based in Owosso, MICHIGAN (USA).

  • Filter Cartridges for Hot Gas Filtration

    The filter cartridges are constructed to meet the special requirements of temperatures higher than 140 °C. They are suitable for a maximum operating temperature of 450 °C. Their metal parts are made of galvanized or stainless steel. As filter media needle felts or weaves of stainless steel are used. The cartridges can be cleaned by jet ...

    By R B Filter GmbH based in Langenbrettach, GERMANY. from Filter Cartridges for Hot Gas Filtration Product line

  • Premium

    Model 910 - Hot/Wet Multi Gas Mass Flow CEM

    The AMETEK Process Instruments Model 910 is specifically configured for monitoring the stack emissions of multiple pollutants on a mass rate basis. It measures stack effluent temperature and velocity in addition to as many as five pollutant concentrations at stack conditions, enabling each pollutant's mass emission rate to be reported. With the ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Hot/Wet Multi Gas Mass Flow CEM Product line

  • Premium

    ECO PHYSICS - Model nCLD 822 CMhr - Modular Gas Analyzer

    The nCLD 822 CMhr analyzer is the next generation in high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD 822 CMhr is modular designed and capable of simultaneously measuring NO, NO2, NOx, NH3 and NOx-amines from hot and humid gas sources without additional cooler. It features a dual inlet option for ...

    By ECO PHYSICS AG based in Duernten, SWITZERLAND. from Modular Gas Analyzer Product line

  • Model CCS-LT - Hot Gas Generators for Low Temperature Applications

    Combustion chambers with refractory brickwork reach their limits as soon as increased heat flow requirements are placed on the downstream process (for example in intermittent operation, if the temperature changes quickly or with short startup and shut-down times). SAACKE offers a series of proven and cost-effective solutions with various designs ...

    By SAACKE GmbH based in Bremen, GERMANY. from Hot Gas Generators for Low Temperature Applications Product line

  • Premium

    ECO PHYSICS - Model nCLD 844 M - Modular Gas Analyzer

    The nCLD 844 M analyzer is the next generation in two-channel high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD 844 M is modular designed and capable of simultaneously measuring NO, NOx and NO2. The analyzers expandable capabilities allow assessment of hot and humid gas sources without additional cooler. It ...

    By ECO PHYSICS AG based in Duernten, SWITZERLAND. from Modular Gas Analyzer Product line

  • Premium

    Cerex - Model SPP100 - Gas Sample Conditioner

    ETG permeation sample conditioning systems are designed to prepare hot gas sample streams for high flow, high performance gas monitoring applications. The ETG permeation system will remove particulates, mists & water vapor from a gas stream without the loss of analyte gasses.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA). from Gas Sample Conditioner Product line

  • Premium

    ECO PHYSICS - Model nCLD 822 Mh - Modular Gas Analyzer

    The nCLD 822 Mh analyzer is the next generation in high precision two-channel nitrogen oxide measurement. Unique in speed and reliability, the nCLD 822 Mh is modular designed and capable of simultaneously measuring NO, NOx and NO2 from hot and humid gas sources without additional cooler. It features a dual inlet option for assessing two ...

    By ECO PHYSICS AG based in Duernten, SWITZERLAND. from Modular Gas Analyzer Product line

  • Premium

    ENVEA (ex Environnement S.A) - Model HOFI Box - Stack Gas Sampling System

    Hot extractive Stack gas sampling system. The HOFI BOX offers an exclusive sampling system dedicated to heated analyzers ( e.g. MIR FT, MIR 9000H, Graphite 52M, Topaze 32M.

    By ENVEA based in Poissy, FRANCE. from Stack Gas Sampling System Product line

  • Hot Gas Generator With Patented Secondary Burning Chamber

    Installed firing capacity: Reciprocating grate: 15.0 MW, Granulate burner: 3 x 5.0 MW. Fuel consumption per year: approx. 80,000 t. Fuels: Bark, production wood (MDF), sawdust. Range of heat values: 2.6 - 3.5 kWh/kg. Year of commissioning: 2010. Location: Luxembourg.

    By Richard Kablitz GmbH based in Lauda-Königshofen, GERMANY. from Hot Gas Generator With Patented Secondary Burning Chamber Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you