Hot Gas Equipment In South Korea
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 919 is a fully extractive hot-wet gas analyzer, providing a complete monitoring system with sample extraction and transport, designed to maintain sample integrity. Developed to meet the requirements of the most challenging process and emissions monitoring applications in a cost-effective way, it delivers high reliability and ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 920 is a multi-gas analyzer specifically configured to monitor the stack emissions of multiple pollutants on a concentration basis. Combining hot-wet analysis with reliable ultraviolet-based measurements, the 920 delivers multi-range sulfur dioxide measurements, alongside simultaneous, independent measurements for nitric oxide and ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Capable of measuring up to five different gases simultaneously, the 910 is a complete analysis system, with a sample extraction and transport designed for maintaining sample integrity. Delivering multi-component analytical performance that typically requires two or more separate analyzers, it provides a cost-effective alternative for the monitoring of multiple gases. An optional zirconium oxide ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 909 is a single gas continuous emissions monitoring (CEM) system that measures stack effluent temperature and velocity alongside pollutant concentrations at stack conditions. This enables mass emission rates to be reported. With no moving parts, the 909 offers high reliability and reduced maintenance requirements. It provides sample and ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
The GCEM40E hot extractive multi-channel gas analyser is CODEL’s industry-proven continuous emissions monitor for difficult applications. Designed exclusively for use on a wide range of applications where the flue gas temperature is abnormally high, low or saturated. Three decades of development, knowledge and practical experience have ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Impac IPE 140/45 pyrometer features a specialized CO2 absorption band to accurately measure hot CO2 ...
-
Manufactured by Dürr Systems, Inc.based in USA
Classic OxiTHERM thermal oxidation technology compromises a combustion chamber - with a refractory fibre or brick lining - and a burner to oxidise VOC at temperatures >800°C. The installed burner system can also handle ex-rated waste gas streams. Downstream, the energy in the clean hot gas can either be used within the process to ...
-
Manufactured by Dürr Systems, Inc.based in USA
for the start-up. The most popular sizes of ROxiTHERM™ regenerative thermal oxidiser (RTO) systems are also available in standardised ROxiTHERM™Classic form, pre-assembled in the workshop and supplied off-the-shelf in shortest delivery times. For high input concentrations a hot gas bypass can be installed and for double air flows a ...
-
Manufactured by Muntersbased in USA
such as automotive and aerospace finishing take advantage of the minimal fuel requirements of this configuration. Gas fired heaters can be used for rotor regeneration. However, using hot gas bypass air from the RTO can almost eliminate only fuel usage for the system during normal operating hours. The only fuel use would be at ...
-
Manufactured by Dürr Systems, Inc.based in USA
Sorpt.X SQ cross-flow packed bed filter systems are based on the sorptive process and are especially suitable for purifying hot exhaust gas flows. The adsorbent used is a bulk material. This is generally limestone, which is an inexpensive but highly effective adsorbent for Air Pollution ...
-
Manufactured by MKS Instruments, Inc.based in USA
by MKS Instruments. It is capable of directly analyzing hot, wet effluent gas streams without the need for sample pre-treatment. It monitors multiple gas components over a wide range of compositions with minimal cross-interference effects from either water (up to 40%) or other potentially interfering ...
-
based in AUSTRIA
For high cleaning efficiency, the RecuKAT's attractive economic performance is due to the low reaction temperature of the CTP catalysts. CTP can refer to more than 30 years of experience with catalysts in industrial applications. The RecuKAT is suitable for small to medium gas flows with low or high ...
-
based in AUSTRIA
The AutoKAT combines the advantages of regenerative thermal oxidation with those of catalytic oxidation. The AutoKAT is a very cost-effective alternative for well understood waste streams. Existing RTO systems can be upgraded to an ...
-
Manufactured by Muntersbased in USA
The Desiccant System Solution (DSS) offers a wide variety of material and components to fit most difficult applications for indoor and outdoor installation. A complete DSS system, ready for operation, consists in its standard design of components for the pre & post treatment, dehumidification rotor with reactivation and required fans for process and reactivation ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfect ammonia gas analyzer or multi-gas analyzer for the measurement in hot & wet flue-gas of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 and ...
-
Manufactured by Dürr Systems, Inc.based in USA
Regenerative thermal oxidation (RTO) is used in a variety of industry sectors to purify exhaust air containing solvents and odors. Highly efficient regenerative thermal processes contribute significantly toward environmental protection. The RTO systems in Dürr’s Oxi.X RK series are designed for low and medium pollutant concentrations. Their key features include an excellent thermal ...
-
Manufactured by Dürr Systems, Inc.based in USA
The adsorption process of the Sorpt.X CD/CC is used for concentrating the pollution content in the ...
-
Manufactured by Dürr Systems, Inc.based in USA
Dürr Sorpt.X AC Evaporative Gas Cooling and Conditioning systems help protect downstream equipment, enhance air pollution control performance, reduce gas volumes, and increase production capacity. This product was formerly known as ...
-
Manufactured by TAECHIN SMET Corporationbased in SOUTH KOREA
Applications: Ethylene production. Coke oven gases. Blast furnace gases. Coal gasifiers. FCCU regenerator gas. Acetylene production (with mechanical controller). Reformer sampling for catalyst removal. Fluidized cat crackers. Green oil removal. Features & Benefits: Provides clean uniform sample to analyzer sample conditioning systems. ...
-
Manufactured by TAECHIN SMET Corporationbased in SOUTH KOREA
Applications: Ethylene production. Coke oven gases. Blast furnace gases. Coal gasifiers. FCCU regenerator gas. Acetylene production (with mechanical controller). Reformer sampling for catalyst removal. Fluidized cat crackers. Green oil removal. Features & Benefits: Provides clean uniform sample to analyzer sample conditioning systems. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you