Hot Gas Equipment Near Indonesia
-
Manufactured by Guangzhou Shincci Energy Equipment Co., Ltd.based in CHINA
One integrate module: Heat pump + mesh belt + insulation board, easier on-site installation. Upgraded corrosion resistance: condenser, evaporator and refrigerant pipelines, heat pump support are SUS316L. Hot water/Gas/Generator waste heat can be utilized. Two modules share one belt-driven type blower, which makes cleaning and maintenance ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfect ammonia gas analyzer or multi-gas analyzer for the measurement in hot & wet flue-gas of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 and ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), ...
-
Manufactured by ABB Measurement Productsbased in SWITZERLAND
ABB is the world"s leading manufacturer in the field of continuous gas analysis and system solutions - formerly known as Hartmann & Braun. Our gas analyzers and system solutions are designed and manufactured exclusively in Frankfurt, Germany. More than 75 years of experience in continuous gas analysis are the basis for our innovative ...
-
Manufactured by ERK Eckrohrkessel GmbHbased in GERMANY
Our experience with water-cooled inclined grates goes back decades and the technology has proven to be effective for many biomass and coal feedstocks. As the name indicates, the grate is water-cooled and the water circulation is incorporated into the boiler’s water circulation. The grate is a membrane wall construction with air nozzles for primary air supply. The angle of the grate is ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The Rapidox 3100 OEM-3 is a three-channel version of our high-performance zirconia oxygen (O2) analyser. Supplied in a metal controller box, the Rapidox 3100 OEM-3 comprises three individual zirconia sensors on bespoke length cables with several options for gas fittings. All three sensor channels are controlled by a single RS485 ...
-
Manufactured by Muntersbased in USA
The Desiccant System Solution (DSS) offers a wide variety of material and components to fit most difficult applications for indoor and outdoor installation. A complete DSS system, ready for operation, consists in its standard design of components for the pre & post treatment, dehumidification rotor with reactivation and required fans for process and reactivation ...
-
Manufactured by Muntersbased in USA
such as automotive and aerospace finishing take advantage of the minimal fuel requirements of this configuration. Gas fired heaters can be used for rotor regeneration. However, using hot gas bypass air from the RTO can almost eliminate only fuel usage for the system during normal operating hours. The only fuel use would be at ...
-
Manufactured by Muntersbased in USA
Munters Zeolite Rotor Concentrator/Oxidizer Systems are the leading technology for cost-effective abatement of VOCs (VOC abatement). With hundreds of systems currently in service, Munters installed base includes some of the world's most respected companies in semiconductor manufacturing, automotive and aerospace industries. Munters Zeolite Concentrators/Oxidizer can achieve destruction and ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Capable of measuring up to five different gases simultaneously, the 910 is a complete analysis system, with a sample extraction and transport designed for maintaining sample integrity. Delivering multi-component analytical performance that typically requires two or more separate analyzers, it provides a cost-effective alternative for the monitoring of multiple gases. An optional zirconium oxide ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 919 is a fully extractive hot-wet gas analyzer, providing a complete monitoring system with sample extraction and transport, designed to maintain sample integrity. Developed to meet the requirements of the most challenging process and emissions monitoring applications in a cost-effective way, it delivers high reliability and ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 909 is a single gas continuous emissions monitoring (CEM) system that measures stack effluent temperature and velocity alongside pollutant concentrations at stack conditions. This enables mass emission rates to be reported. With no moving parts, the 909 offers high reliability and reduced maintenance requirements. It provides sample and ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 920 is a multi-gas analyzer specifically configured to monitor the stack emissions of multiple pollutants on a concentration basis. Combining hot-wet analysis with reliable ultraviolet-based measurements, the 920 delivers multi-range sulfur dioxide measurements, alongside simultaneous, independent measurements for nitric oxide and ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s advanced controls and automation systems provide the safest, most efficient, and highly reliable operation while integrating smoothly into existing plant operations. From new equipment to upgrades and retrofits, our systems utilize the latest in Programmable Logic Controller (PLC) based controls, touch screen interfaces, and remote ...
-
Manufactured by TREMA Verfahrenstechnik GmbHbased in GERMANY
High-efficiency separator. Removal of critical dusts. Up to 99.9 % dust collection efficiency. Fixed and adjustable throats. Fluctuating flow rates. Hot gas quench (> 1,000°C). No ...
-
Manufactured by TREMA Verfahrenstechnik GmbHbased in GERMANY
Adiabatic saturation of hot gases. Hot gas quench. Flue gas ...
-
Manufactured by TREMA Verfahrenstechnik GmbHbased in GERMANY
Gaseous pollutant removal from hot gases, Hot gas dedusting, Adsorption, Cullet preheating, Glass bead ...
-
Manufactured by RMA Fiventures Asia-Pacific Pte Ltd.based in SINGAPORE
Design and Features:Available for Wet, Hot or Dry Fuel Gas. System Compliance to Local / International Environmental Regulations including US EPA 40 CFR Part 75 and 40 CFR Part 60. ...
-
based in SINGAPORE
Furnace Exit Gas Temperature (FEGT) monitoring is a critical parameter, which can be used to preserve the boiler operation and performance including emission, reliability and safety. The FEGT in a utility boiler requires monitoring during boiler start-up and on-line operation to minimise undesirable condition to occur. The FEGT can be ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Impac IPE 140/45 pyrometer features a specialized CO2 absorption band to accurately measure hot CO2 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you