Hot Gas Equipment Near Taiwan
-
Manufactured by AMETEK Process Instrumentsbased in USA
Capable of measuring up to five different gases simultaneously, the 910 is a complete analysis system, with a sample extraction and transport designed for maintaining sample integrity. Delivering multi-component analytical performance that typically requires two or more separate analyzers, it provides a cost-effective alternative for the monitoring of multiple gases. An optional zirconium oxide ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 919 is a fully extractive hot-wet gas analyzer, providing a complete monitoring system with sample extraction and transport, designed to maintain sample integrity. Developed to meet the requirements of the most challenging process and emissions monitoring applications in a cost-effective way, it delivers high reliability and ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 909 is a single gas continuous emissions monitoring (CEM) system that measures stack effluent temperature and velocity alongside pollutant concentrations at stack conditions. This enables mass emission rates to be reported. With no moving parts, the 909 offers high reliability and reduced maintenance requirements. It provides sample and ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 920 is a multi-gas analyzer specifically configured to monitor the stack emissions of multiple pollutants on a concentration basis. Combining hot-wet analysis with reliable ultraviolet-based measurements, the 920 delivers multi-range sulfur dioxide measurements, alongside simultaneous, independent measurements for nitric oxide and ...
-
Manufactured by MKS Instruments, Inc.based in USA
by MKS Instruments. It is capable of directly analyzing hot, wet effluent gas streams without the need for sample pre-treatment. It monitors multiple gas components over a wide range of compositions with minimal cross-interference effects from either water (up to 40%) or other potentially interfering ...
-
Manufactured by DAS Environmental Expert GmbHbased in GERMANY
The electrostatic condensate separator JUNIPER reliably and cost-effectively removes condensable organic compounds (VOC´s) like those that accrue in manufacturing fabs in the photovoltaic industry. Many of these organic compounds have a bad odor and many of them are toxic. JUNIPER is capable of handling waste gas flows up to 1000 ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfect ammonia gas analyzer or multi-gas analyzer for the measurement in hot & wet flue-gas of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 and ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Impac IPE 140/45 pyrometer features a specialized CO2 absorption band to accurately measure hot CO2 ...
-
based in GERMANY
The GRIMM 7917 Emission Sampling System (ESS) is designed to sample aerosol particles directly from hot exhaust gas, e.g. from fireplaces, combustion processes or engine exhausts. The sampling probe (Ø 8 mm) can be directly connected to stacks and features a two-stage dilution system with integrated filter, dryer and activated ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s advanced controls and automation systems provide the safest, most efficient, and highly reliable operation while integrating smoothly into existing plant operations. From new equipment to upgrades and retrofits, our systems utilize the latest in Programmable Logic Controller (PLC) based controls, touch screen interfaces, and remote ...
-
Manufactured by Muntersbased in USA
The Desiccant System Solution (DSS) offers a wide variety of material and components to fit most difficult applications for indoor and outdoor installation. A complete DSS system, ready for operation, consists in its standard design of components for the pre & post treatment, dehumidification rotor with reactivation and required fans for process and reactivation ...
-
Manufactured by Muntersbased in USA
such as automotive and aerospace finishing take advantage of the minimal fuel requirements of this configuration. Gas fired heaters can be used for rotor regeneration. However, using hot gas bypass air from the RTO can almost eliminate only fuel usage for the system during normal operating hours. The only fuel use would be at ...
-
Manufactured by Muntersbased in USA
Munters Zeolite Rotor Concentrator/Oxidizer Systems are the leading technology for cost-effective abatement of VOCs (VOC abatement). With hundreds of systems currently in service, Munters installed base includes some of the world's most respected companies in semiconductor manufacturing, automotive and aerospace industries. Munters Zeolite Concentrators/Oxidizer can achieve destruction and ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The Rapidox 3100 OEM-3 is a three-channel version of our high-performance zirconia oxygen (O2) analyser. Supplied in a metal controller box, the Rapidox 3100 OEM-3 comprises three individual zirconia sensors on bespoke length cables with several options for gas fittings. All three sensor channels are controlled by a single RS485 ...
-
Manufactured by Rising Sun Rotomolding Co., Ltd.based in CHINA
This machine is suitable for producing medium and large-sized products with different process a, large product differentiation and small quantities. In addition, this machine is also able to continuously produce products when its molds are changed, which is small in footprint and highly ...
-
Manufactured by Rising Sun Rotomolding Co., Ltd.based in CHINA
This machine is suitable for producing medium and large-sized products with different process a, large product differentiation and small quantities. In addition, this machine is also able to continuously produce products when its molds are changed, which is small in footprint and highly ...
-
Manufactured by Rising Sun Rotomolding Co., Ltd.based in CHINA
This Rising Suns' Carousel automatic-controlled machine is widely accepted by the market for it is efficient, energy-saving and cost-effective. It has a central turntable that carries 3-4 arms and cars. Among them the car is automatically and independently controlled, thus making production more flexible and improving the efficiency by 30% compared with other ...
-
Manufactured by Taizhou Suptec Machinery Co., Ltd.based in CHINA
This SYNERGIC LCD MIG machine can keep the syn settingsafteryou have switched the syn off and then you can make fineadjustments to the settings which are on the LcD display. with15AK Mig torch with 3m cable,2.EIectrode holder with i.2mcable,3.Earth clamp with 1.8m cable.4.Protect mask , brush5. Manual ...
-
Manufactured by Taizhou Haotian industrial Co.,Ltdbased in CHINA
P84 polyimide needlefelts are excellent high temperature filter media in terms of performance, generally surpassing the other standard media with the exception of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you