Hot Gas Equipment Near Turkmenistan
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
The dust concentration measuring device PFM 02 V is used for the continuous measurement of dust contents, especially for the emission measurement according to TI air, 13th, 17th and 27th BImSchV as well as for the dust concentration measurement in process monitorings. Parallel to the dust measurement flow and temperature of the smoke ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfect ammonia gas analyzer or multi-gas analyzer for the measurement in hot & wet flue-gas of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 and ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), ...
-
Manufactured by ERK Eckrohrkessel GmbHbased in GERMANY
Our experience with water-cooled inclined grates goes back decades and the technology has proven to be effective for many biomass and coal feedstocks. As the name indicates, the grate is water-cooled and the water circulation is incorporated into the boiler’s water circulation. The grate is a membrane wall construction with air nozzles for primary air supply. The angle of the grate is ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The Rapidox 3100 OEM-3 is a three-channel version of our high-performance zirconia oxygen (O2) analyser. Supplied in a metal controller box, the Rapidox 3100 OEM-3 comprises three individual zirconia sensors on bespoke length cables with several options for gas fittings. All three sensor channels are controlled by a single RS485 ...
-
Manufactured by Scheuch GmbHbased in AUSTRIA
Thanks to the development of filter media that is suitable for higher exhaust gas temperatures and the growing trend towards the use of secondary fuels, bag filter plants have eclipsed virtually every other kind of system when it comes to today's kiln dedusting applications, with some electrostatic precipitators being converted into bag ...
-
Manufactured by Ayvazbased in TURKEY
Ayvaz strainers have wide usage area for filtering impurities in pipelines. They protect all plumbing equipment such as counters, pumps and control valves. They are Y type so they can be cleaned easily without uninstalling. Filter of PTY-20 can remove easily for ...
-
based in GERMANY
The CJK5 HVOF is a high pressure, high velocity thermal spray process, using liquid fuel (kerosene) and oxygen which are fed into a combustion chamber, where they are ignited and continuously combusted. The resultant hot gas at a pressure close to 1 MPa, emanates through a converging – diverging nozzle and travels through a straight ...
-
Manufactured by Beko Technologies Corp.based in GERMANY
Compressed air refrigeration dryers DRYPOINT RA HT are specially designed for high inlet temperatures up to 212 °F. With the DRYPOINT RA HT, two further components have been added to the well known DRYPOINT RA: a pre-cooler consisting of copper pipe and aluminium fins, and a pre-filter with a BEKOMAT condensate drain.DRYPOINT RA HT gives you high quality compressed air treatment in accordance ...
-
Manufactured by Beko Technologies Corp.based in GERMANY
DRYPOINT RS HP compressed-air refrigeration dryers have been designed specifically for reliable operation at high-pressure. They are certified for pressures up to 725 psig. They are ideal for use in PET blowmoulding. Design highlights of this series include specially developed stainless-steel plate-type heat exchangers and condensate-separation flow operating on the basis of the demister ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Capable of measuring up to five different gases simultaneously, the 910 is a complete analysis system, with a sample extraction and transport designed for maintaining sample integrity. Delivering multi-component analytical performance that typically requires two or more separate analyzers, it provides a cost-effective alternative for the monitoring of multiple gases. An optional zirconium oxide ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 919 is a fully extractive hot-wet gas analyzer, providing a complete monitoring system with sample extraction and transport, designed to maintain sample integrity. Developed to meet the requirements of the most challenging process and emissions monitoring applications in a cost-effective way, it delivers high reliability and ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 909 is a single gas continuous emissions monitoring (CEM) system that measures stack effluent temperature and velocity alongside pollutant concentrations at stack conditions. This enables mass emission rates to be reported. With no moving parts, the 909 offers high reliability and reduced maintenance requirements. It provides sample and ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 920 is a multi-gas analyzer specifically configured to monitor the stack emissions of multiple pollutants on a concentration basis. Combining hot-wet analysis with reliable ultraviolet-based measurements, the 920 delivers multi-range sulfur dioxide measurements, alongside simultaneous, independent measurements for nitric oxide and ...
-
Manufactured by Muntersbased in USA
The Desiccant System Solution (DSS) offers a wide variety of material and components to fit most difficult applications for indoor and outdoor installation. A complete DSS system, ready for operation, consists in its standard design of components for the pre & post treatment, dehumidification rotor with reactivation and required fans for process and reactivation ...
-
Manufactured by Muntersbased in USA
such as automotive and aerospace finishing take advantage of the minimal fuel requirements of this configuration. Gas fired heaters can be used for rotor regeneration. However, using hot gas bypass air from the RTO can almost eliminate only fuel usage for the system during normal operating hours. The only fuel use would be at ...
-
Manufactured by Muntersbased in USA
Munters Zeolite Rotor Concentrator/Oxidizer Systems are the leading technology for cost-effective abatement of VOCs (VOC abatement). With hundreds of systems currently in service, Munters installed base includes some of the world's most respected companies in semiconductor manufacturing, automotive and aerospace industries. Munters Zeolite Concentrators/Oxidizer can achieve destruction and ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
ETG permeation sample conditioning systems are designed to prepare hot gas sample streams for high flow, high performance gas monitoring applications. The ETG permeation system will remove particulates, mists & water vapor from a gas stream without the loss of analyte ...
-
Manufactured by AMFAH India Trading Pvt Ltd.based in INDIA
The AMFAH portable professional dehumidifiers of the series FDNF are high-performance appliances, equipped with robust galvanized steel frame painted with epoxy resins and mounted on 4 swivel casters that make it easy to move. They have a high efficiency air filter in polyurethane, washable and easily replaceable, and a very large condensate collection tank with the possibility of direct ...
-
Manufactured by AMFAH India Trading Pvt Ltd.based in INDIA
The Amfah portable professional dehumidifiers of the series FDNP are high-performance appliances, equipped with robust galvanized steel frame coated with epoxy resins and mounted on 2 big wheels that make it easy to move even in yard environments or in case of obstacles. They have a high efficiency air filter in polyurethane, washable and easily replaceable, and a very large condensate collection ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you