Hydraulic Actuator Equipment In Ontario
-
Manufactured by Pascobased in CANADA
Water Ingress Protected: O-Rings are fitted on bodies, caps and so on this ensure water ingress protected. tandardization: The shaft driven accessory interface conforms to NAMUR and is identical on all NSF Series models, allowing standardization of accessory mounting hardware and installation practices. Wear Resistant: The guide rod and piston rod have an advanced surface treatment, which ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
As specialist manufacturers of electro-hydraulic actuation and control equipment we offer comprehensive, purpose designed, engineered and manufactured solutions for the operation of choke and control valves for onshore and offshore ...
-
Manufactured by Parker Hannifin Corpbased in USA
HTR Hydraulic Rotary Actuators Standard pressure: up to 210 bar Standard rotational range of 90º, 180º and 360º Custom rotations up to 1800° Torque outputs to 68,000 Nm Single and double rack models for continuous high torque High capacity tapered roller bearings to support external ...
-
Manufactured by Cleanfix North America Inc.based in CANADA
Simply Clean: With this reversible fan, the blades are rotated with pneumatic or hydraulic actuation. Resetting takes place by spring force. If required, the cleaning process can be automated with a ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rack and pinion actuators often offer the most economical solution for quarter-turn valves that have a fairly constant torque requirement throughout the stroke. RH (hydraulic) actuators are available in five body sizes to produce torque output up to 3,700 Nm (29,900 lbf.in) at operating pressures up to 250 bar (3,600 psi). They are ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
The Rotork Advanced Valve Remote Control System starts with the self-contained micro power pack E-ACT-C type electro-hydraulic actuator with integral electronic control unit), and goes up to the “I/O Control Cabinet” which contains main and backup communication cards, power distribution, serial interface and a touchscreen ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
RH rack and pinion hydraulic actuators are engineered to operate ball, butterfly, plug and other quarter-turn valves for either on/off or modulating service. The heavy-duty construction and compact design make this product ideal for skid manufacturers as well as offshore and process applications which require robust yet space saving ...
-
Manufactured by Cla-Valbased in USA
The Cla-Val Model 100-02 is a hydraulically operated, diaphragm actuated, globe or angle pattern valve. It consists of four major components: body, intermediate chamber, diaphragm assembly and cover. The diaphragm assembly is the only moving ...
-
Manufactured by Samson Controls Inc.based in USA
rotary plug design increases flow capacities with only minor reduction in the pressure recovery factor making the design an ideal replacement for linear globe control valves even with cavitation and flashing process conditions present. The Vetec 62.7 can be assembled with a pneumatic, electric, hydraulic, or electro-hydraulic actuator also ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
GP (pneumatic) and GH (hydraulic) range scotch yoke actuators are designed to provide a rotary, quarter-turn movement for either on/off or modulating duty. The rugged yet compact design is available with two different yoke designs. The classic symmetric yoke delivers peak torque at both ends of stroke. Alternatively, they can be ...
-
Manufactured by GA Industries, LLCbased in USA
, Class 250B has 17-4PH shaft per AWWA C504. Standard traveling nut, worm gear or 10-position lever manual actuator. Optional electric motor or pneumatic or hydraulic cylinder ...
-
Manufactured by Cla-Valbased in USA
The Cla-Val Model 750B-4KG1 Pressure Relief Valve is a hydraulically operated pilot actuated automatic control valve designed specifically to automatically relieve excess pressure in fire protection pumping systems. Pilot controlled, it maintains constant system pressure at the pump discharge within very close limits as demands change. The ...
-
Distributed by Preferred Recycling Equipment Incbased in CANADA
The Marathon Pelletizer give exceptionally long production runs without maintenance shutdowns. It produces the high quality pellets required for today’s advanced/engineering materials applications. The easy access features allow maintenance to be done quickly, on line, for increased ...
-
Manufactured by Lubecore International Inc.based in CANADA
The HP-400 Compact Chief Lubrication System’s compact footprint ensures your small equipment remains well lubricated. Its simple design delivers a precise amount of grease, allowing for consistent delivery with every cycle of the ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Hydraulic power units (HPU) complement our extensive offering of rotary and linear actuators. We have over three decades of experience in their manufacture with units in service in a variety of plants and pipelines in locations spanning the ...
-
Manufactured by Pascobased in CANADA
PASCO steel ball vaive are designed and manufactured to provide maximum service life and dependability. All bail valves are full ported and meet ihe design requirements of American Petroleum Institute Standard API 608 & API 6D. British Standard 3S 535iand generally conform to American Society of Mechanical Engineers standard ASME B16.34. Valves are available in a complete range of body/bonnet ...
-
Manufactured by Miller Technology Inc.based in CANADA
The BG 110-M was developed in collaboration with mining specialists especially for use in mining applications. With a height of only 1.80 m and an overall length without attachments of less than 7.40 m, it can be operated in even the smallest of mines in the ...
-
Manufactured by Pascobased in CANADA
Indicator: A position indicator with Namur mounting is standard on all PASCO pneumatic actuators for mounting accessories. Pinion: The hardened alloy steel pinion is precision ground and Nickel plated (over 15um) in order to reduce friction, provide maximum wear resistance. Full conformance with the newest standards of ISO5211 & ...
-
Manufactured by Pascobased in CANADA
PASCO cast steel gate valve are designed and manufactured to provide maximum service life and dependability. All gate valves are full ported and meet the design requirements of American Petroleum Institute Standard API 600 & API 6D, British Standard BS 1414 & BS EN 1984 and generally conform to American Society of Mechanical Engineers standard ASME B16.34. Valves are available in a ...
-
Manufactured by Samson Controls Inc.based in USA
The Type 3310 segmented ball control valve is designed for general service applications up to the limits of the ANSI 300 pressure class rating. These general service applications include process events such as erosion and abrasion found in most process control ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you