hydraulic profiler Equipment | Environmental XPRT

Model HPT - Hydraulic Profiling Tool

The HPT allows the creation of fast, continuous real-time profiles of soil hydraulic properties in both fine- and coarse-grained material. The HPT uses a sensitive, downhole transducer to measure the pressure response of the soil to injection of water. One primary use of this tool is to locate and define ...

By ASC Tech Services based in Rancho Cordova, CALIFORNIA (USA).

Hydraulic Profiling Tool (HPT)

The Hydraulic Profiling Tool (HPT) now allows for economical, rapid, continuous, real-time profiles of soil hydraulic properties in fine-textured to coarse-grained material. The HPT uses a sensitive, down-hole transducer to monitor the matrix back-pressure response to water injection. The probe is advanced ...

By Zebra Environmental Corporation based in Lynbrook, NEW YORK (USA).

Cascade - Membrane Interface Hydraulic Profiling (MiHPT)

Rapid screening tools reduce investigation time and save money by quickly identifying areas of the site for further investigation with more costly definitive technologies. The MiHPT allows for rapid reconnaissance of sites to zero in on source areas and plume cores while identifying both transport zones and contaminant mass storage ...

By Cascade Drilling based in Bothell, WASHINGTON (USA). from Site Characterization Product line

Hydraulic Profile for Treating Wastewater Likened to Domestic Water

A suite of basic operations for wastewater treatment that provides effluent quality within the parameters established by European regulations, Council Directive ...

By Remosa - Recubrimientos y Moldeados s.a. based in Súria, SPAIN. from Household Wastewater Treatment Product line

Larzep - Model LX Series - Low Profile Hexagon Hydraulic Torque Wrenches

Designed to tighten and loosen directly nuts requiring accurate high torque during bolt tightening and maximum torque during bolt loosening. The wrenches consist of a cylinder (LAX_ _) and an interchangeable hexagonal ratchet link (LAX_ _H_ _ _). Example: If you need a torque wrench for 50 mm hexagon with a maximum torque of 5.800 Nm, references to request are LAX06 + LAX06H050. (See full table ...

By Larzep S.A based in Mallabia, SPAIN. from Hydraulic Torque Wrenches Product line

Showcase

Model HMC-SR - Quick Relief Valve, To Avoid Water Hammer

This valve protects pumps and pipes from pump startup and shutoff pressure surges due to power failure. Pump off means valve normally closed. If pump starting cause pressure surge, the pilot smoothly opens the valve to limit pressure ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks - Hydromodul C Product line

Premium

AccuFAS - Submerged Fixed Film System

Complexities such as stringent discharge limits, space constraints, and regional variations present a growing burden for plants facing demands to treat greater flows. Brentwood’s AccuFAS FBBR system offers a flexible solution for facilities requiring greater treatment capacity in existing basins, better nitrification with consistent seasonal performance, and biological nutrient removal to ...

By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA). from Biological Wastewater Treatment Product line

Premium

Model HM-PP - Proportional Piston Actuated Valve Designed for High Differential Pressures

The valve maintains downstream pressure to a constant and pre-set rate of upstream value. No pilots needed. The valve chamber is directly exposed to the downstream pressure and this varying pressure value modulates the valve to open or close according to upstream ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HM-SV - Excessive Flow Valve

The valve avoids reservoir emptying and flooding dues to casual pipeline failure. The valve is controlled by a differential hydraulic pilot that senses flow speed closing completely main flow when senses critical speed ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Sebright - Model LP Series - Hydraulic Cart Dumpers (Up to 4 Cu. Yd. Cart Capacity)

Low Profile (LP Series Dumpers) are designed for heavy loads and are usually used for deck mounted applications. Two 4 inch cylinders are mounted horizontally to the dumper frame to lift carts up to 60 ...

By Sebright Products, Inc. based in Hopkins, MICHIGAN (USA). from Compactors - Hydraulic Cart Dumpers (Tippers) Product line

Premium

Model HM-NR - Check Valve

The valve closes totally the pipe line when back flow occurs. The valve is complete with an hydraulic control circuit able to regulate operation’s speed during closing, preventing ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HM-GAL - Modulating Type Float Control Valve

The valve assures maximum water level into tanks and reservoirs and avoids overflow. The valve operate by means of a modulating float, mounted on tank, able to regulate gradual opening of the valve when water level goes down from ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HM-EL - Electrohydraulic On / Off Valve

The valve opens fully or shuts off in response to electric signals. The valve is controlled by a solenoid that allows control liquid to flow in the upper chamber in order to close the main valve or, alternatively, drains upper chamber in order to open the main valve. ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HMC-ALT - Altitude Control Valve

This valve controls water level in high level reservoirs to avoid overflow, without any external control system like float control etc. The valve remains completely open until the closing input is transmitted by the 3-ways piezometric altitude ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks - Hydromodul C Product line

Premium

Model HM-ALT - Altitude Control Valve

This valve controls water level in high level reservoirs to avoid overflow, without any external control system like float control etc. The valve remains completely open until the closing input is transmitted by the 3-ways piezometric altitude ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HM-QP - Flow Control Valve

The valve controls downstream flow to a pre-set and constant value in order to limit water consumptions and preserve pipeline fill rate or to set a maximum demand value. The valve is controlled by a differential hydraulic pilot that senses the pressure fall generated by water flow into a calibrated ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Sebright - Model HP Series - Hydraulic Cart Dumpers (Up to 6 Cu. Yd. Cart Capacity)

High Profile (HP Series Dumpers) are designed for heavy loads from ground level, side dumping/tipping where differences in elevations exist. Two cylinders mounted diagonally to frame provide cart dumping up to 84 inch elevations. The OD Version is designed with a wide frame that can straddle the deck of ...

By Sebright Products, Inc. based in Hopkins, MICHIGAN (USA). from Compactors - Hydraulic Cart Dumpers (Tippers) Product line

Premium

Model HMC-QP - Flow Control Valve

The valve controls downstream flow to a pre-set and constant value in order to limit water consumptions and preserve pipeline fill rate or to set a maximum demand value. The valve is controlled by a differential hydraulic pilot that senses the pressure fall generated by water flow into a calibrated ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks - Hydromodul C Product line

Premium

Model HM-CP - Pump Control Valve

The valve isolates pumps from the system during pumps starting and stopping to protect pipe lines and pumps itself. The valve is equipped with a control solenoid valve that is switched on at pump starting and is able to fulfill pipe line gradually, reducing pressure rising peaks and allowing soft starting of the pump with closed outlet. The valve controls pump stopping as well, gradually closing ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HM-SR - Quick Relief Water Valve to avoid Water Hammer

This valve protects pumps and pipes from pump startup and shutoff pressure surges due to power failure. Pump off means valve normally closed. If pump starting cause pressure surge, the pilot smoothly opens the valve to limit pressure rising. Quick relief valve opens due to both pressure rises and falls, fully reducing any pressure ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Subscribe to our eBulletins