Showing results for: Trace Hydrocarbons Equipment
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Filter sand, supplied in bags and pallet packages: The filter sand, consisting of 99.5% SiO2, is extremely low in trace metals and aromatic hydrocarbons. This makes our filter sand the best sand available for monitoring well ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Gas analyzers with an FID (flame ionization detector) are well suited for continuous total hydrocarbon measurement. The measurement is not component specific but substance-class specific. In the first approximation, the measurement result is proportional to the number of C atoms in the respective ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
Our Coconut Shell Activated carbon media is available in granular form in the following mesh sizes, 8×30 mesh, 12×40 mesh, and 20×50 mesh for liquid water purification. Our coconut shell activated carbon media is used in both commercial/industrial process water, to remove trace hydrocarbons, volatile organic compounds, low ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 201 is a portable oxygen analyzer used primarily for the measurement of O2 concentration in gas flows, chambers, or gas flushed hoods (such as glove boxes). The analyzer comes with both an “open faced” fitting and a T-fitting, allowing it to be used for analyzing gas flows, or set in chambers where oxygen levels need to be monitored. The sensor operation is not ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 901 is a battery-operated, portable headspace oxygen analyzer. Other headspace analyzers require a new sensor every 1-2 years. The Model 901 is equipped with a long life sensor, expected to last 5+ years. The Model 901 is trusted by small and large food packagers, producers, and quality control personnel throughout the world. Use it in the lab, or on the packaging line. ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
Our transportable model 3-200 fully heated FID is successfully used throughout international markets for over 30 years. Also among other portable gas FIDs, the 3-200 It is the first ever built transportable fully heated FID using our proprietary back purge sample filter. It is widely distributed throughout the industry and the stack testing community and is much liked for its ruggedness, high ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-600 FID is another low cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-500 FID is our lowest cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The 3-300A heated FID was designed in the early 80's as a space saving alternative to our VE7. Also the 3-300A was a "first" in the industry due to its sample filter back purge feature. It is also a very much liked 19" rack mount heated FID throughout the stack testing community and well known for its ruggedness, forgivingness and long standing accuracy and sensitivity. The 3-300A is fully ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M 3-800 Portable Heated Total Hydrocarbon Analyzer is a heavy duty FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
Our HFID Model H100 is a compact heated FID analyzer for high purity hydrogen applications. The H100 measures low trace total hydrocarbon concentration in Hydrogen. For fastest response and highest accuracy except the pressure regulator all components in contact with sample are housed in a 190 deg Celsius heated oven.. The Model H100 is ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
first total hydrocarbon analyzers being officially certified for compliance in Europe. In the USA, a significant part of the Method 25A was written around the VE7. Many thousand VE7s were sold mainly in Europe and in the USA. TUV approved and certified for 2. BImSchV. 13. BImSchV and 17. BImSchV, QAL1 certified and fully complies with EN 12619, ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The HFID Model 603 is a competitively priced, digitally controlled self extracting, heated total hydrocarbon analyzer for high accuracy, sensitivity and long term stability. It can be used in a 19' rack or as a table top ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M. Engineering HFID Model 5-100 is a compact 19" rack mount or table top heated total hydrocarbon analyzer for high accuracy, sensitivity and stability for pressurized samples with conventional sample back pressure ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-700 FID is designed to be installed directly upstream of a FTIR analyzer (e.g. Gasmet) to continuously measure the total concentration of hydrocarbons within a gaseous sample. All controls which allow to calibrate the FTIR or FID individually are built in. Sources can be ambient air, ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M W600 Heated Total Hydrocarbon Analyzer is a very compact wall or panel mount heated FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 905 is a benchtop, portable oxygen analyzer used primarily for the measurement of residual oxygen in gas-flushed food packages. The Model 905 is used for the measurement of residual oxygen in food packages. With an expected oxygen sensor life of 4-5 years, it vastly outperforms other oxygen analyzers with a cheap sensor that might last 1-2 ...
-
Distributed by Chrysalis Scientific Technologies Inc.based in CANADA
NANOCHEM HCX Purifiers are designed to remove trace hydrocarbons from inert gases and hydrogen. An example of a process sensitive to hydrocarbon contamination is DUV lithography. Deposition of carbon-based films from purge gas contaminants on the optical components decreases light throughput and negatively affects the patterning process. ...
-
Manufactured by Aspatecbased in NETHERLANDS
Bacterial digestion is the process of bacteria that digests organic particles. The bacteria feed on pollution, from which they achieve nutrition for growth and reproduction. The waste is fully used up or converted into harmless products such as water and carbonic acid. The result is clean water without traces of hydrocarbon. Organic ...
-
Manufactured by Aycliffe Filtration Limitedbased in UNITED KINGDOM
The polishing out of trace hydrocarbons from unprocessed and partially processed water prior to discharge has always proved a difficult and costly exercise. Dispersed oil , emulsions and the dissolved fraction can now be efficiently, economically and reliably removed using the latest filter media developments from AFL. ENVirol filter ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you