H2S Equipment Available In St. Lucia
-
Manufactured by AIR EMISSIONS SOLUTIONS | XICHEGN EP LTD.based in CHINA
Hydrogen sulfide H2s scrubbers are widely used in chemicals, chemical preparations, pharmaceuticals, laboratories, metallurgy, light industry, food, new energy, electroplating, pickling, petroleum, machinery, electric power and other industries. It has the advantages of high efficiency, strong corrosion resistance, high strength, low noise, ...
-
Manufactured by Calgon Carbon Corporationbased in USA
System employs a number of radial flow canisters with Centaur HP activated carbon. Designed for continuous operation. Available in a number of sizes for flows up to 30,000 cfm. Calgon Carbon Corporation"s PHOENIX is a state-of-the-art hydrogen sulfide (H2S) removal system. PHOENIX is simply the most effective means of removing airborne ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The Odalog sensor is used to measure the sulphuretted hydrogen (H2S) concentration in sewage works or systems. A version with a 4-20 mA output is available for situations in which continuous value measurement is required. The sensor is protected against ambient humidity and has an IP66/IP68 protection rating. The recorder can store up to ...
-
by Cvictus Inc.based in CANADA
The world today produces over 90 million tonnes per annum (Mtpa) of hydrogen, almost all from steam methane reforming (SMR) that is as dirty as coal-fired power generation. Electrolysis from renewable energy is much cleaner but also higher cost and consumes huge amounts of fresh water (14-18 t/t H2). Cv¯ictus's patented and proprietary ...
-
based in UNITED KINGDOM
In the presence of air and moisture, sour gas (H2S) has the aptitude to corrode internal surfaces of various components while developing a hazardous atmosphere that will impact personnel health and safety. Detecting and monitoring H2S gas at an early stage will provide an instantaneous alarm for life-critical safety scenarios and ...
-
Manufactured by Analytical Systems Kecobased in USA
H2S in Condensate Analyzer: The ability to analytically quantify hydrogen sulfide in condensate is enhanced with the Sample Transfer Stripper, exclusive ASI Membrane Technology and ratiometric colorimetric technologies offered by Analytical Systems International (ASI). This principle of operation is described in various ASTM methods ...
-
Manufactured by MV Technologies, LLCbased in USA
MV’s H2S Plus Systems are in use treating biogas streams from landfills to anaerobic digesters at farms, wastewater treatment facilities and food & beverage processing operations. MV’s systems treat 30,000 cubic feet of biogas and landfill gas/min., every day and provide low cost solutions to H2S management in natural ...
-
Manufactured by Jayne Products, Inc.based in USA
JPD is an industrial strength odor neutralizer. It is specifically formulated to react with the problematic gas of H2S. Unlike deodorizers which use masking agents and perfumes to merely cover-up the odor, JPD chemically neutralizes the odors in an environmentally friendly manner. JPD is used in refineries after chemical decontamination as a ...
-
Manufactured by Bete, Gas Scrubber Division of Trevi nvbased in BELGIUM
Hydrogen Sulphide (H2S) is a toxic and flammable gas that has a smell of rotten egs. It's smell treshold is extremely low: 0.0005 ...
-
Manufactured by VICI Metronics, Inc.based in USA
All monitors include a sensor, instruction booklet, screw driver, and span gas flow cup and ...
-
Manufactured by Teledyne APIbased in USA
The Model T101 H2S analyzer uses the proven UV fluorescence principle to measure hydrogen sulfide at levels commonly required for ambient air monitoring. The Model T101 is equipped with an internally mounted catalytic converter set at 315°C to convert H2S to SO2. A switching mode alternately measures H2S and SO2 while showing both ...
-
Manufactured by Focused Photonics Inc. (FPI)based in CHINA
FPI offers model OMA-3500 for accurate mea-surements of H2S and SO2 concentration in the tail gas from a Claus process sulfur recovery plant. This system comes with a pressure relief probe, sample conditioning system and the analyzer. This system provides extremely fast, accurate response for tight process control. ...
-
Manufactured by General Carbon Corporationbased in USA
GC Sulfursorb Plus carbon is a non-impregnated, activated carbon which has been specially developed for removing Hydrogen Sulfide and Sulfur compounds from air streams. It is well suited for use in sewage treatment plants and pumping stations where these compounds are typically found. GC Sulfursorb Plus gives you the high loading rates of impregnated carbons without the thermal risks associated ...
-
Manufactured by SulfiLogger - Unisense A/Sbased in DENMARK
The SulfiLoggerTM S1-1120 sensor continuously measures hydrogen sulfide (H2S) directly in pressurized wastewater or in ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Using proven ultraviolet (UV) technology, the 930 identifies potential safety risks in sulfur storage locations through simultaneous hydrogen sulfide (H2S) and sulfur dioxide (SO2) measurements. Capable of stable, sensitive measurements ranging from parts-per-million (ppm) to percentage levels, the analyzer offers output alarms for the ...
-
Distributed by CAS DataLoggersbased in USA
The OdaLog RTx Wireless H2S Gas Logger is the next generation of OdaLog gas logger that utilizes a built-in GSM modem to transmit real-time gas concentration data to a dedicated Internet server that is remotely accessible using the latest OdaStat-G software application. The OdaLog RTx provides an M2M solution for the integration of ...
-
based in UNITED KINGDOM
Diffusive body w/cartridge (white/RAD170) - pk ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Measuring hydrogen sulfide (H2S), the 931 is a rugged, single-ultraviolet (UV) component photometric analyzer with a low-maintenance, no-moving-parts design, housed in an explosion-proof package. It can also be configured for primary measurements of sulfur dioxide (SO2), carbonyl sulfide (COS), carbon disulfide (CS2) or ammonia (NH3), and ...
-
Manufactured by Diteco Limitedbased in UNITED KINGDOM
Measures H2S in natural gas, fuel gas, biogas or LPG. Duty: To measure the concentration of H2S in a process gas stream. The principle of operation is as follows. A reel of paper tape impregnated with lead acetate is exposed to the gaseous process sample in the sample chamber. Hydrogen sulphide (H2S) in the process sample reacts with the ...
-
Manufactured by Q2 Technologies, LLCbased in USA
Q2 Technologies has brought to market the Enviro-Solve Pro3 series; an innovative non-amine/non-aldehyde H2S scavenger for crude oil applications. Q2 Technologies and its former partner Quaker Chemical developed the triazine technology that is used world-wide today. A need was identified to reduce fouling created by amine based ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you