Only show results in Texas? Ok

impeller pump equipment

  • Premium

    DeTech - Model DV Series - Vortex Impeller Pump

    DV series vortex impeller submersible sewage pump, up to 7.5kw, DN150 discharge, and with large free solids passage, especifically for water contains suspended material, long fabric, etc.

    By DeTech Pumps Co. Ltd. based in Nanjing, CHINA. from Pump Item Product line

  • Premium

    DeTech - Model WQ Series - Channel Impeller Sewage Pump

    The ‘WQ’ pump are suitable for clear and waste water, also for sewage and sludge containing solids and fibrous material. The pump suitabe for wet installtion and vertical dry installation thanks to cooling jacket design.

    By DeTech Pumps Co. Ltd. based in Nanjing, CHINA. from Pump Item Product line

  • Premium

    DeTech - Model SSP Series - Centrifugal Screw Impeller Sewage Pump

    Extremely versatile in its applications, the impeller provides efficient handling of a range of liquids, often highly abrasive or corrosive in nature. It is ideal for: Solids Handling, Pumping Viscous Sludges, Handling Delicate or Low Shear Products.

    By DeTech Pumps Co. Ltd. based in Nanjing, CHINA. from Pump Item Product line

  • Impeller Pumps

    KIESEL Impeller pumps are dry and self-primming rotary pumps. They unite the characteristics of a rotary pump and a positive displacement pump into one. The working principle is very simple: The heart of the pump is a flexible wheel (impeller), which is made of an elastomer material called Neoprene and the individual wings of the impeller are ...

    By G.A. KIESEL GmbH based in Heilbronn, GERMANY.

  • Chemineer Impeller - Model P-4 - Impeller Pump

    A reasonably cost effective impeller in both turbulent and laminar flow. Good impeller for applications where the viscosity changes over a wide range causing the flow regime to vary between turbulent and laminar flow. A reasonably cost effective impeller for solids suspension.

    By National Oilwell Varco based in Dayton, OHIO (USA). from Impeller Pump Product line

  • Chemineer - Model S-4 - Impeller Pump

    A cost effective impeller for operation very near the floor of a tank for agitating the heel in solids suspension applications. Also an effective impeller in laminar flow applications, especially when impeller Reynolds numbers drop below 50.

    By National Oilwell Varco based in Dayton, OHIO (USA). from Impeller Pump Product line

  • Chemineer - Model JT-2 - Impeller Pump

    The JT-2 Impeller has been developed for superior blending in transitional flow. Higher viscosity and non-Newtonian fluids make blending much more challenging. This impeller is used after conventional turbines have lost efficiency due to viscous effects and before the need for close clearance impellers.

    By National Oilwell Varco based in Dayton, OHIO (USA). from Impellers Product line

  • Chemineer - Model RL-3 - Impeller Pump

    The Chemineer RL-3 impeller is designed for applications where a ragless agitator is desired to prevent fibrous material build-up on the rotating impeller. Typical in Waste Treatment applications the RL-3 is a rag shedding impeller which prevents build-up of fibrous materials on the impeller, while providing a strong axial flow for efficient ...

    By National Oilwell Varco based in Dayton, OHIO (USA). from Impellers Product line

  • Prochem Maxflo - Model Mark II & III - Impeller Pumps

    High efficiency, high solidity impellers for use in turbulent side entering applications. They are especially effective for fluids possessing a yield value, such as paper stock. The high solidity permits operation nearer the boiling point without cavitation.

    By National Oilwell Varco based in Dayton, OHIO (USA). from Impeller Pumps Product line

  • Premium

    Piranha - Corrosion Resistant Pumps

    Piranha 316 stainless steel submersibles feature recessed impellers for extra solids handling capability while minimizing abrasive wear. The majority of material pumped never comes in contact with the impeller. Mechanical seals are abrasion resistant silicon carbide. All wetted metal components are 316 stainless steel except the rotor shaft which ...

    By Piranha Pumps & Dredges - Equipment Specialties Co., Inc. based in Albuquerque, NEW MEXICO (USA). from Submersible Pumps Product line

  • Premium

    Piranha - Solids Handling Pump

    Piranha solids handling pump line is comprised of models ranging from 1 to 30 horsepower. They are designed for pumping slurry & debris laden water in sump & lagoon applications including: industrial, sewage, wastewater, animal & vegetable waste, paper pulp and construction de-watering applications where excessive solids prohibit the ...

    By Piranha Pumps & Dredges - Equipment Specialties Co., Inc. based in Albuquerque, NEW MEXICO (USA). from Submersible Pumps Product line

  • Premium

    DeTech - Model GQ Series - Dirty Water Pump

    GQ series submersible pump; With centrifugal impeller, and suction strainer, high eff for pumping dirty water, without clogged. Mainly for waste water effluent in construction, commecial industy, etc.

    By DeTech Pumps Co. Ltd. based in Nanjing, CHINA. from Pump Item Product line

  • Regent - Vortex Impeller Pumps

    Most of these models are derived from the standard Dinflow range and include a recessed impeller which creates a vortex within the pump casing. Smaller models are also included in the range, mainly for marine use. Vortex pumps can be supplied as bareshaft pumps, long-coupled, base-mounted units, close-coupled motorpumps, or long column sump pumps.

    By Regent Pumps Pty Ltd based in Dingley, AUSTRALIA.

  • Model AD Advance Series - Flexible Impeller Pumps

    AD ADVANCE series  is a stainless steel self-priming flexible impeller pump.. The impeller, deforming itself inside the stainless steel body pump, ensures a quick suction up to 6 meters and a continuous and delicate transfer of the liquid to the outlet.. Besides, the low revolution speed makes it suited for trasferring delicated and fragile ...

    By Alphadynamic Pumps Co based in Kifisia, GREECE. from AD - Flexible Impeller Pumps Product line

  • Model AD ADVANCE SERIES - Flexible Impeller Pumps

    The impeller, deforming itself inside the stainless steel body pump, ensures a quick suction up to 6 meters and a continuous and delicate transfer of the liquid to the outlet. Besides, the low revolution speed makes it suited for trasferring delicated and fragile liquids, and fluids with suspension solids. The pump runs in both rotation directions ...

    By Alphadynamic Pumps Co based in Kifisia, GREECE. from Flexible Impeller Pumps Product line

  • Channel Impeller Pump

    Application: Whether transferring oil from a floating skimmer to a land based tank or mixing seawater with dispersant, pumps form an integral part of our equipment package. To enable us to offer these complete packages, we have formed strong relationships with quality pump manufacturers that allows us to provide a range of speciality application ...

    By Global Spill Control based in Thomastown, AUSTRALIA. from Industrial Skimmers - Pumps & Powerpacks Product line

  • Screw Impeller Pump

    Application: Whether transferring oil from a floating skimmer to a land based tank or mixing seawater with dispersant, pumps form an integral part of our equipment package. To enable us to offer these complete packages, we have formed strong relationships with quality pump manufacturers that allows us to provide a range of speciality application ...

    By Global Spill Control based in Thomastown, AUSTRALIA. from Spills on Water - Pumps & Powerpacks Product line

  • Chemineer - Model CD-6 - Concave Impeller Pump

    The CD-6 impeller is a second generation gas and immiscible liquid dispersion impeller. The CD-6 can handle about 2.4 times the maximum gas capacity of the D-6 impeller. The CD-6 is similar to the Smith impeller, but there are substantial power and dispersion capability differences. This impeller has been used at aeration numbers as high as 2.1.

    By National Oilwell Varco based in Dayton, OHIO (USA). from Concave Impeller Pump Product line

  • Model 4 S4 YB - 0.3m³/h-3m³/h - Floating Impeller Pump

    Standard Features:  Diffuser and Impeller: fiber glass reinforced. Outlet and Suction: Stainles Steel Casting. This pumps can work in min 4' drilling well (100mm).. Max. Sand Content 25 gr/m³. 0.5m³/sa - 21m³/sa'These Pumps can supply water from.

    By DELTA CABLE based in Alsancak, TURKEY. from 4` Polycarbonate Pumps Product line

  • Model RV - Helicoidal Impeller Pump

    The RV centrifugal pump with helicoidal impeller is the best solution for the transfer of liquids with solid particles or medium viscosity products that cannot be pumped with an ordinary centrifugal pump. Due to the helicoidal shape of the impeller, the transfer of the product is gentle and without clogging., e.g. solid particles suspended in ...

    By INOXPA based in Banyoles, SPAIN. from Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you