impeller pump equipment in Quebec

  • Hayward Gordon Torus - Recessed Impeller Vortex Pumps

    A severe duty pump for fluids containing large solids, abrasives, delicate crystals, fibers, and stringy materials. The impeller is completely recessed within the pump, minimizing contact with the process fluid and allowing clear passage of solids without clogging.

    By Hayward Gordon Ltd. Office in Kirkland, QUEBEC (CANADA). from Recessed Impeller Vortex Pumps Product line

  • Wastewater Pumps / Water Pumps

    Claro provides a selection of high quality pumps including: Chopper pumps. Recirculation pumps. Aerator pumps. Grit/slurry pumps. Self-priming grit slurry pumps. Vertical wet pit pumps. Dry pit solids handling pumps. Submersible solids handling pumps. Sludge pumps. Vortex pumps. Ni hard vortex pumps. Severe duty cup type recessed impeller pumps. ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Wastewater Pumps / Water Pumps Product line

  • Tsurumi - Model EPT2-150DD - Trash Pump

    Heavy-Duty, High Head, High Volume Dewatering Pumps featuring all Cast Iron construction for maximum corrosion resistance in this class and dual performance levels in one pump by changing impeller and wear plate.

    By Tsurumi Pumps Office in Boucherville, QUEBEC (CANADA). from Trash Pump Product line

  • Model Class L - In-Line Pumps

    CASING is of high-grade cast iron with parabolic cross section. Suction inlet is designer for proper velocity and entrance angle to guarantee quiet operation. Boss for tappings is provided for both discharge and suction gauges. BRONZE CASING WEARING RINGS prevent wear and ensure low cost maintenance. IMPELLER of Bronze is enclosed type, cast in ...

    By Dynapompe Inc. based in Montreal, QUEBEC (CANADA).

  • Litostroj - Centrifugal Pumps

    Singe or multi-stage pumps, discharge capacity up to 2.000 l/s and delivery head up to 450 m, horizontal or vertical design, usage for water supply in general industry, power plants, deep-wells, and for drainage and sewage treatment in general industryi, single or double-suction impeller.

    By Litostroj Power Office in Bromont, QUEBEC (CANADA). from Centrifugal Pumps Product line

  • Model SS233 - Submersible Pumps

    This lightweight, compact submersible pump is the first choice for household moving water applications such as: flooded rooms, flat roofs, fill tanks, basins, fountains and waterfalls. Hardy thermoplastic pump casing body resists corrosion and heat. Further, the SS233 incorporates internal thermal overload protection, dual shaft seals, and ...

    By Multiquip Inc. Office in Laval, QUEBEC (CANADA). from Submersible Pumps Product line

  • Model BZ - 3-phase / 50Hz - Stainless Steel Pump

    Non-clog impeller allows large diameter of foreign matter with respect to discharge bore. This ensures that waste water and sewage are efficiently transferred. The impeller comes out with the motor when the motor is removed from the pump casing (a back-pull-out design, upto 3,7kW).

    By Tsurumi Pumps Office in Boucherville, QUEBEC (CANADA). from Stainless Steel Pump Product line

  • Tsurumi - Model LB480 - Submersible Pump

    The LB series of submersible pumps are extremely robust, compact contractor pumps, that have a 50mm outlet and a tough pressed steel strainer base and body. They offer excellent durability during periods of continuous use and/or operator abuse. A combination of a rubber pump chamber and a urethane vortex impeller provides excellent wear resistance ...

    By Tsurumi Pumps Office in Boucherville, QUEBEC (CANADA). from Submersible Pump Product line

  • Model Class C & D - End Suction Pumps

    CASING is of high-grade cast iron with parabolic cross section. Top horizontal discharge makes pump self-venting and avoids vapor locks. Vent and drain connections are located on suction side for easy access. Tapping for discharge gauge & boss for suction gauge are provided. BRONZE CASING WEARING RINGS prevent wear and ensure low cost ...

    By Dynapompe Inc. based in Montreal, QUEBEC (CANADA).

  • Model GPN - 3-phase / 50Hz - Heavy Duty Sand Pump

    Heavy Duty Sand Pump A special steel impeller and suction plate have greatly increased the pump's life. The casing is designed to have wide passing area, thorough thickness and anti-abrasion material.

    By Tsurumi Pumps Office in Boucherville, QUEBEC (CANADA). from Heavy Duty Sand Pump Product line

  • Tsurumi - Model GSZ Series - Three Phase Dewatering Pump

    Utilizing 4 pole, 1800 rpm motors and 6 pole, 1200 rpm motors the GSZ Series offers longer wear life on parts due to the slower impeller tip speed. GSZ pumps are the most formidable high volume slurry/dewatering pumps offered today.

    By Tsurumi Pumps Office in Boucherville, QUEBEC (CANADA). from Three Phase Dewatering Pump Product line

  • Tsurumi - Model KTZ Series - Three Phase Portables Pumps

    KTZ pumps are designed to withstand the most demanding conditions, including those found in the highly abrasive waters of construction, aggregate, and mining dewatering. Versatility is increased as each pump model has the capability of easily converting between high head and high volume performance with a simple change of the impeller and wear ...

    By Tsurumi Pumps Office in Boucherville, QUEBEC (CANADA). from Three Phase Portables Pumps Product line

  • Sump and Sewage Pump

    Four new features have been incorporated into Darling designs to reduce maintenance and repair costs to the very minimum. 1. Adjustment of the impeller for wear at inlet is made in factory and thrust bearing will keep permanent adjustment and will relieve motor from all thrust. 2. A casing wearing ring of bronze is provided to simplify repair work ...

    By Dynapompe Inc. based in Montreal, QUEBEC (CANADA).

  • Burke - Model 503121S - Shallow Well Jet Pumps

    ECONOMIC CAST IRON SHALLOW WELL JET PUMP WITH 25' LIFT CAPACITY. INCORPORATED EJECTOR. HIGH PERFORMANCE NORYL IMPELLER. INDUSTRIAL MOTOR TOTALLY ENCLOSED, FAN COOLED. FULL TIME CONNECTED RUN CAPACITOR, TO ELIMINATE STARTING WEAR VS REGULAR MOTOR. THERMAL AND OVERLOAD PROTECTION. BUILT FOR A CONTINUOUS USE. 1/2HP TEFC MOTOR, 115/230V. MAXIMUM ...

    By Burke Water Systems Manufacturing Inc. based in Laval, QUEBEC (CANADA). from Shallow Well Jet Pumps Product line

  • Burke - Model 503120S - Sprinkler & Pool Regular Flow High Pressure Pump

    Economic cast iron sprinkler jet pump with 25' lift capacity. Incorporated ejector. High performance noryl impeller. Industrial motor totally enclosed, fan cooled.Full time connected run capacitor, to eliminate starting wear vs regular motor. Thermal and overload protection. Built for a continuous use. 1/2hp tefc motor, 115/230v. Maximum pressure ...

  • VortiClar Vortex Chambers / Sand Traps

    Claro VortiClarâ„¢ forced vortex grit removal systems deliver high grit removal efficiencies across a wide range of daily flow capacities. An engineered hydraulic design removes fine grit and other debris particles, separates organic from inorganic material, and reduces grit accumulation in downstream basins, channels, weirs, and piping. The ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from VortiClar Vortex Chambers / Sand Traps Product line

  • Model 80 Series - Self-Priming Pump

    80 Series pumps are designed for non-stop workloads. The straight-in-suction design of these efficient pumps guarantees quick, positive self-priming and allows them to operate at higher suction levels than most other self-priming centrifugal pumps. Liquid enters directly into the impeller eye. A suction check valve prevents in-line return flow ...

    By Gorman-Rupp Co. Distributor in Saint-Laurent, QUEBEC (CANADA). from Self-Priming Pump Product line

  • Marlow - Model e-530SC Series - Swimming Pool Pumps

    The e-530SC series has been designed to meet the exacting flow requirements of commercial pools, water features, fountains and waterpark applications. Efficiency has been maximized to reduce operating costs. It is a NSF-50 certified robust end suction, close-coupled, foot mounted pump. Features a 304 Stainless Steel impeller trimmed to meet your ...

    By Goulds Water Technology - a Xylem brand Distributor in St-Rosaire, QUEBEC (CANADA). from Swimming Pool Pumps Product line

  • Marlow - Model e-531SC Series - Swimming Pool Pumps

    The e-531SC series has been designed to meet the exacting flow requirements of commercial pools, water features, fountains and waterpark applications. Efficiency has been maximized to reduce operating costs. It is a NSF-50 certified robust end suction, close-coupled, foot-mounted pump. Features a 304 Stainless Steel impeller trimmed to meet your ...

    By Goulds Water Technology - a Xylem brand Distributor in St-Rosaire, QUEBEC (CANADA). from Swimming Pool Pumps Product line

  • Super - Model U Series - Self-Priming Pumps

    Gorman-Rupp Super-U Series® pumps are among the most efficient self-priming, solids handling pumps available.  Their unique hydraulic design and smooth wall volute casing minimize friction loss and drag.  The multi-vane, open impeller is designed for high efficiency operation yet can still handle limited solids.  The pumps not ...

    By Gorman-Rupp Co. Distributor in Saint-Laurent, QUEBEC (CANADA). from Self-Priming Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you