in-situ chemical oxidation Equipment available in Kentucky

Available in Kentucky| Near Kentucky
49 Results found

We couldn't find any in-situ chemical oxidation equipment in Kentucky

Here is a list of results available in Kentucky

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: in-situ chemical oxidation ×

  • Available in: USA ×

  • Available in: Kentucky ×

PersulfOx - In Situ Chemical Oxidation (ISCO)

by REGENESIS     based in San Clemente, CALIFORNIA (USA)

PersulfOx is an in-situ chemical oxidation reagent that destroys organic contaminants found in groundwater and soil through powerful yet controlled chemical reactions. PersulfOx is a sodium persulfate - based technology which employs a patented catalyst to enhance the oxidative destruction of both hydrocarbons and chlorinated contaminants in the ...

RegenOx - In-Situ Chemical Oxidation (ISCO)

by REGENESIS     based in San Clemente, CALIFORNIA (USA)

RegenOx is an advanced chemical oxidation technology that destroys contaminants through powerful, yet controlled chemical reactions and not through biological means. This product maximizes in situ performance while using a solid alkaline oxidant that employs a sodium percarbonate complex with a multi-part catalytic formula. RegenOx directly ...

RegenOx PetroCleanze - In Situ Chemical Oxidation Technology

by REGENESIS     based in San Clemente, CALIFORNIA (USA)

RegenOx PetroCleanze is a customized formulation of the widely used RegenOx in situ chemical oxidation technology. The primary function of RegenOx PetroCleanze is to increase the desorption rates of hydrocarbons bound in saturated soil and make them available for more efficient and rapid treatment using a range of enhanced recovery technologies.

Surfactant Enhanced In-situ Chemical Oxidation

by VeruTEK Technologies, Inc.     based in South Windsor,, CONNECTICUT (USA)

VeruTEK’s patented S-ISCO (Surfactant Enhanced In-situ Chemical Oxidation) process incorporates VeruSOL, a biodegradable, plant-based surfactant/co-solvent mixture that both desorbs soil contaminants – making them accessible for oxidative destruction in place, and also stabilizes the oxidant–improving the performance of the ...

Klozur - Persulfate Oxidant for In Situ Chemical Oxidation

by PeroxyChem (formerly FMC Corporation)     based in Philadelphia, PENNSYLVANIA (USA)

Klozur persulfate is the oxidant of choice for in situ chemical oxidation (ISCO), because of its ability to treat a wide range of contaminants including chlorinated solvents, petroleum and PAHs. When properly activated, Klozur persulfate provides an unmatched combination of oxidative power and control that can be delivered both safely and cost ...

Permanganate In-Situ Chemical Oxidation (ISCO)

by In-Situ Oxidative Technologies, Inc (ISOTEC) - Soil & Groundwater Remediation     based in Lawrenceville, NEW JERSEY (USA)

ISOTEC's permanganate process utilizes either potassium permanganate (KMnO4) or sodium permanganate (NaMnO4) for in-situ chemical oxidation (ISCO). The reaction mechanism associated with both reagents is similar and particularly effective at treating aqueous concentrations of perchloroethene (PCE) and trichloroethene (TCE) in environmental ...

ISOTEC - Activated Persulfate In-Situ Chemical Oxidation (ISCO)

by In-Situ Oxidative Technologies, Inc (ISOTEC) - Soil & Groundwater Remediation     based in Lawrenceville, NEW JERSEY (USA)

ISOTEC's persulfate technology uses sodium persulfate, activated by our patented modified Fenton's reagent, alkaline reagents (including sodium hydroxide and lime), hydrogen peroxide or our patented chelated iron complex to produce sulfate free radicals that attack contaminants. Persulfate, when used as an in-situ chemical oxidation reagent, is ...

Surfactant Enhanced Ex-Situ Chemical Oxidation

by VeruTEK Technologies, Inc.     based in South Windsor,, CONNECTICUT (USA)

S-ESCO (surfactant enhanced ex-situ chemical oxidation) process uses chemical oxidation to treat contaminated soil ex-Situ. Stock pilled soil is sprayed with VeruSOLVE surfactant and oxidant solution, and tilled through mechanical means (pug mill etc). Organic contaminants are desorbed from the soil matrix, emulsified by the VeruSOL surfactant so ...

Ex-Situ Chemical Oxidation of Soil & Hazardous Waste System

by ART Engineering, L.L.C. (ART)     based in Land O Lakes, FLORIDA (USA)

ART employs two types of ex-situ soil/sediment chemical oxidation processes: Saturated Soil Contacting - typical contaminant reduction efficiency in range of 50-80%. Soil Oxidation in Slurry Reactors - contaminant reduction greater than 90% up to 99% achievable depending on type of contamination and soil/sediment matrix.

MFR - Modified Fenton`s Reagent for In-Situ Chemical Oxidation (ISCO)

by In-Situ Oxidative Technologies, Inc (ISOTEC) - Soil & Groundwater Remediation     based in Lawrenceville, NEW JERSEY (USA)

ISOTEC's modified Fenton's in-situ chemical oxidation (ISCO) process is based on the fundamental principles of Fenton's chemistry. H.J.H. Fenton first demonstrated the use of Fenton's chemistry in 1894 by oxidation of tartaric acid using a soluble iron-catalyzed decomposition of dilute hydrogen peroxide under acidic conditions. The modified ...

RegenOx PetroCleanze - Frees Bound Hydrocarbons for More Effective Enhanced Recovery and Chemical Oxidation

by REGENESIS     based in San Clemente, CALIFORNIA (USA)

RegenOx PetroCleanze is a customized formulation of the widely used RegenOx in situ chemical oxidation technology. The primary function of RegenOx PetroCleanze is to increase the desorption rates of hydrocarbons bound in saturated soil and make them available for more efficient and rapid treatment using a range of enhanced recovery technologies.

Potassium Permanganate

by Hepure Technologies     based in FLEMINGTON, NEW JERSEY (USA)

In Situ Chemical Oxidation (ISCO) with sodium permanganate and potassium permanganate is a safe, cost-effective and rapid remediation technology for the treatment of VOCs (e.g. PCE, TCE, DCE VC etc.) in groundwater, soils and sediments.

Sodium Permanganate

by Hepure Technologies     based in FLEMINGTON, NEW JERSEY (USA)

In Situ Chemical Oxidation (ISCO) with sodium permanganate and potassium permanganate is a safe, cost-effective and rapid remediation technology for the treatment of VOCs (e.g. PCE, TCE, DCE VC etc.) in groundwater, soils and sediments.

Remotox® - In-Situ Remediation of Heavy Metal Contaminated Soils

by Graus Chemicals, LLC     based in Glendale, ARIZONA (USA)

Lead, chromium, zinc, copper, cadmium, mercury, and arsenic are among the most common metal contaminants found on remediation project sites. Metal concentrations higher than the established regulatory guidelines have been shown to create significant health risks to humans.

In Situ Chemical Technology

by Euremtech     based in Zelzate, BELGIUM

EUREMTECH is skilled & experienced for any commercial chemical reagent.

In-situ remediation

by Specialty Systems Integrators, Inc.     based in Plymouth, MINNESOTA (USA)

Ozone injection provides enhanced stripping of VOCs from groundwater while introducing ozone as a highly reactive oxidant to destroy the targeted compounds. Ozone is a highly reactive chemical that has proven to be effective in destroying a wide variety of organic chemicals, including MTBE and chlorinated VOCs. Ozone destroys organic chemicals ...

CRS - Biogeochemical In Situ Chemical Reduction (ISCR)

by REGENESIS     based in San Clemente, CALIFORNIA (USA)

CRS® (Chemical Reducing Solution) is an iron-based amendment for in situ chemical reduction (ISCR) of halogenated hydrocarbon contaminants such as chlorinated ethenes and ethanes. CRS is a pH neutral, liquid iron solution that is easily mixed with 3-D Microemulsion Factory Emulsified before injection into contaminated groundwater. CRS is a ...

Cool-Ox - In-Situ (and Ex-Situ) Remediation Technology

by DeepEarth Technologies, Inc     based in Alsip, ILLINOIS (USA)

The patented Cool-Ox process is an in-situ (and ex-situ) remediation technology that combines controlled chemical oxidation with accelerated biodegradation subsequent to the oxidation phase. The process is based upon using hydrogen peroxide as the generator of the oxidizing radicals. However, unlike the Fenton or Fenton-like processes that use ...

Persulfate

by Geo-Cleanse International, Inc.     based in Matawan, NEW JERSEY (USA)

Persulfates are strong oxidants that have a wide variety of industrial applications.

Catalyzed Hydrogen Peroxide

by Geo-Cleanse International, Inc.     based in Matawan, NEW JERSEY (USA)

Catalyzed hydrogen peroxide (CHP) is a solution of hydrogen peroxide and a ferrous iron catalyst, which together generates hydroxyl free radicals that act as the active oxidizing agent (referred to as the Haber-Weiss mechanism, specific to Fenton’s reagent).

Need help finding the right suppliers?

Let the XPRTs do the work for you