Incinerated Waste Equipment Available In Virgin Islands
-
ShowcaseManufactured by For.Tec. Forniture Tecnologiche S.r.l.based in ITALY
Our waste incinerators mod. EXCE OS are discontinuous static ovens, with top loading ...
-
PremiumManufactured by For.Tec. Forniture Tecnologiche S.r.l.based in ITALY
Our waste incinerators mod. ROTOMAC are rotary or oscillating combustion chamber furnaces, which are suitable for the incineration of almost all types of solid and liquid waste such as whole animals, slaughtering waste and generic organic waste but also hazardous and not-hazardous hospital ...
-
PremiumManufactured by For.Tec. Forniture Tecnologiche S.r.l.based in ITALY
Our waste incinerators mod. ECOTEC are ovens with a static chamberdesigned for the thermo destruction of waste having high average lower calorific value ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Wastes such as oils, spent solvents, waste water, fats and emulsions, which would benefit from being atomised within the combustion chamber, would be pumped into the incinerator. Liquid wastes will be stored in a tank fitted with optional heaters to promote the optimum pumping viscosity. On the demands of the ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
To facilitate establishments where the waste is stored and transported to the incinerator in wheeled bins, a bin tipper can be selected to transfer the waste either directly into the incinerator or into the incinerator via a ram loader. The bin elevator / tipper incorporates a lifting cradle on to which the bin ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
The plant is controlled and policed by an all encompassing supervisory propriety human machine interface based control system. The system will constantly monitor the plants performance and automatically trim and correct any out of tolerance ...
-
Manufactured by GEI Works, LLCbased in USA
This incinerator system for industrial waste, GEI model A-SH solid waste thermal oxidizer system/incinerator is manufactured with a 2-3 cell stepped hearth, designed to process a higher volume, continuous feed, waste disposal, using controlled air within the primary combustion chambers. This ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Automatic Dioxin Sampling System GT90 Dioxin+ is a future-proof solution for a long-term sampling of dioxin emissions in conformity to the European standards EN1948-1 and EN15267. The system represents the cutting-edge technology for dioxin sampling and fulfills all the requirements of the dioxin measurement ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
: coal-fired power plant, waste incineration power plant, chemical plant and so on ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Emission Monitoring System CEMS II e offers modular and TÜV and MCERTS certified (QAL1) solution for environmental compliance in industrial processes, such as powerplants, waste incineration, cement plants and beyond. The system adjusts to changes in regulations and future advances of emissions monitoring best practices with ...
-
PremiumManufactured by Granutech-Saturn Systemsbased in USA
The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements. Granutech’s Saturn ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury (TGM) is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
dedusting by sampling probe, tracing by heating pipe, dehydration and cooling by two-step condensing, the measured gas is analyzed by the heated gas analysis module (TDLAS and DOAS technique). It is an effective solution to solve the technical problem that large humidity variation of the waste incineration and other occasions lead to measuring ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
EQMS-3000 is an online particulate monitoring system, which realizes integration of multi-parameter monitoring technique and solves technical problem of the uncontrolled emission. It is designed for construction sites, roads, living areas, factory sector, tourism, waste incineration plants and other construction sites and production ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Advanced non-contact infrared thermometer designed for measuring the gas temperature within waste incinerators. The CDA thermometer is optimised to accurately measure the gas temperature in waste incinerators using AMETEK Land’s unique non-contact infrared technology. CDA ‘sees’ through a cold ambient air to ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
We can provide a range of accredited, portable or continuous emissions monitoring systems which satisfy both operator and regulatory requirements including the waste incineration directive (WID), large combustion plant directive (LCPD) and the newer industrial emissions directive (IED). These systems are currently operational in a number of ...
-
PremiumManufactured by PTF Häusser GmbHbased in GERMANY
Wrapped square bales are frequently sent to waste incinerator plants for burning. The bales need to be broken up at the plant prior to incineration. This first requires cutting of the binding wires on the bale, followed by cutting open of the film to release the product from the wrapping. The Rotowrap BO (Bale Opener) is a superior-quality ...
-
based in SWITZERLAND
Incineration of wastes releases pollutants, which are often found in flue gas. CTU Clean Technology Universe AG (CTU) offers ecological and economical gas cleaning solutions for: Municipal solid waste incineration plants, Hazardous waste incineration plants, RDF (refuse derived fuel) power ...
-
Manufactured by ITK Envifront ABbased in SWEDEN
The ITK Envifront TAS process is developed for cleaning of flue gasses through so called dry adsorption and is specially suited for crematories, small waste incineration plants or hazardous waste incineration plants. The system is dimensioned for plants with a size of 100-2000 kg/h, with a medium to high ...
-
Manufactured by Infratech Corporationbased in CANADA
Infratech's combustion group offers thermal oxidizers and gas waste incineration products and solutions, designed and manufactured to exacting project specifications, industry standards and applicable environmental regulations. With dedicated in-house, incineration specific engineering, project management, drafting, manufacturing and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you