Incineration Waste Equipment In Texas
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Automatic Dioxin Sampling System GT90 Dioxin+ is a future-proof solution for a long-term sampling of dioxin emissions in conformity to the European standards EN1948-1 and EN15267. The system represents the cutting-edge technology for dioxin sampling and fulfills all the requirements of the dioxin measurement ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Advanced non-contact infrared thermometer designed for measuring the gas temperature within waste incinerators. The CDA thermometer is optimised to accurately measure the gas temperature in waste incinerators using AMETEK Land’s unique non-contact infrared technology. CDA ‘sees’ through a cold ambient air to ...
-
PremiumManufactured by Granutech-Saturn Systemsbased in USA
The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements. Granutech’s Saturn ...
-
Manufactured by Muntersbased in USA
scrubbers Gas cleaning devices in waste incineration ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
The Krauss-Maffei VZU-G gypsum centrifuge is most suitable for desulfurization of flue gases from coal-fired heat/ power plants, waste incinerators, and copper smelters. Washing the flue gas with limestone slurry is the most successful method and generates reusable ...
-
Manufactured by Muntersbased in USA
One single stage or 2 superposed V shaped units on 2 support layers. Flushing systems are installed on either up- and/ or downstream side of the mist eliminators. Target applications are Flue gas desulphurization plants for processes with high turn down ratios, Exhaust air treatment plants, Waste Incineration plants and Inlet and exhaust ...
-
Manufactured by MKS Instruments, Inc.based in USA
from stationary sources, including municipal and industrial waste incinerators, power plants, cement kilns and other fixed location sources of ...
-
Manufactured by Muntersbased in USA
can be reduced up to 600mm without reducing any comfortable access to the stages for cleaning purposes. Target applications Flue gas desulphurization plants for processes with high turn down ratios Exhaust air treatment plants Waste Incineration plants Material PPTV, PPHT, PP, FRP, PPGC, PSU, Stainless steel ...
-
based in USA
In early 2010, we recognized an enormous and rapidly growing need for an innovative solution to address the challenges of waste destruction. Since 1995, more than 99% of the medical waste incinerators in the US have been closed. The trend was obvious. The need for an environmentally safe technology for the destruction of medical ...
-
Manufactured by MKS Instruments, Inc.based in USA
The MultiGas™ FTIR Gas Analyzer is an FTIR-based gas analyzer designed for integration with complete continuous emissions monitoring systems (CEMS) to measure emissions from stationary sources such as waste incinerators, power plants and cement kilns. This analyzer is the core technology used in the TÜV and MCERTS certified MGS300 system ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
SITRANS SL is designed for measuring oxygen (O2) with high sensitivity. It consists of a pair of cross-duct sensors, a transmitter unit and a detector unit, both with the same dimensions. Due to its little installation effort and its minimum maintenance requirements, SITRANS SL guarantees a high level of economic ...
-
Manufactured by Metso Recycling Equipmentbased in GERMANY
. Examples include recycling plants for refuse derived fuel (RDF), incinerators, and large hazardous waste plants with challenging inputs such as household waste, bulky waste, construction and demolition waste, chemical waste, industrial waste, tree stumps, carpets, mattresses, ...
-
Manufactured by Muntersbased in USA
The DH 2100-FGD (T 100) is a vane type droplet separator for horizontal gas flow. The DH2100-FGD with the panel design was first used in horizontal downstream ducts of FGD absorber towers. Most of the times an automated cleaning system is installed. This not only increases the lifetime of the entire system it also decreases the maintenance to a minimum. The gas flow charged with liquid droplets ...
-
Manufactured by Robinson Fans Incbased in USA
Robinson radial blade (RB) fans are custom engineered and built for rugged service in abrasive airstreams. Robinson radial blade fans are used extensively for efficient forced- and induced-draft service in the metals, chemical, power generation, paper, rock products, glass, resource recovery, incineration and other industries. A wide ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Measure Gases in Ambient and Humid Conditions. Gasmet CX4015 is designed for continuous monitoring applications in ambient conditions, such as workplace air monitoring and quality control applications. It can be used to measure up to 50 components simultaneously, and additional gases can be easily added without any hardware changes. The sample cell can be heated up to 50 °C, which allows ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Emission Monitoring System CEMS II e offers modular and TÜV and MCERTS certified (QAL1) solution for environmental compliance in industrial processes, such as powerplants, waste incineration, cement plants and beyond. The system adjusts to changes in regulations and future advances of emissions monitoring best practices with ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
The fluid bed drying system with direct feeding converts dewatered sludge into almost dust-free granules with > 90% DS. The thermal heat for evaporation of the water is transferred indirectly by a heat exchanger immersed in the fluid bed. The fluid bed dryer is integrated into an inert gas loop ...
-
Manufactured by Dürr Systems, Inc.based in USA
Dürr Part.X PW wet electrostatic precipitators are used to effectively clean industrial gases of fine particulate matter, acid mists and aerosols to meet environmental regulations and/or protect downstream equipment. The key features of Part.X PW systems include maximum removal efficiencies, reliable operation, and low operating costs, while significantly reducing the need for ...
-
Manufactured by HGH USAbased in USA
Pyroscan-U is specifically designed to perform thermal monitoring and mapping of any object inside a kiln, furnace, boiler or reactor, while looking at the area of interest through a standard window, from outside the combustion ...
-
Manufactured by Aqua Drill Internationalbased in USA
Our Aqua Milling process is the most advanced high-pressure water-jet cleaning technology available today. Based on years of operational experience and continuous improvement, Aqua Drill’s Engineering has developed the proprietary Aqua Milling technology exclusively used by Aqua Drill International. Employing high-energy water-jets and more than one hundred eighty different customized ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you