incinerator equipment in Croatia

  • Premium

    Model B-440 - Wet Digester System

    The Wet Digester B-440 allows an ecological pre-incineration of different types of samples. A wide temperature range (up to 600 °C) is available. Programmable incineration ramps alow for reproducible procedures.

    By B√úCHI Labortechnik AG Office in CROATIA. from Wet Digester System Product line

  • Premium

    AEREON - Halogenated Thermal Incineration Systems

    AEREON's halogenated thermal oxidizer systems are designed to handle hazardous halogenated streams produced from various chemical processes in a safe and effective manner. Systems are designed to maintain high destruction efficiency of the compounds with an effective high chamber temperature and residence time.

    By AEREON Distributor in Reading, CROATIA. from Halogenated Thermal Incineration Systems Product line

  • Premium

    Omnigrad - Model S TAF16 - High temperature TC Thermometer

    Applicable for cement production, steel treatment, incinerators and fluidized bed furnaces. Measuring points with extremely high process temperatures require these special thermometers with ceramic or metal thermowells as well as thermocouples made from special metals, such as platinum and rhodium. The thermowell made from special materials ...

    By Endress Hauser AG Office in Zagreb, CROATIA. from High temperature TC Thermometer Product line

  • Premium

    Flexus - Bale Opener

    For opening bales, we have developed our own bale opener that fits almost any loader, making it easy to swap out the bale grab for a bale opener when the time comes to open the bales for incineration or further processing when needed. Like the bale grab, the bale opener is developed and built entirely by Flexus to withstand the heavy loads of ...

    By Flexus Balasystem AB Distributor in Zagreb, CROATIA. from Bale Opener Product line

  • Premium

    Opsis - Model 400Hg TGM - Differential Optical Absorption Spectroscopy (DOAS) System

    Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury (TGM) is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable results.

    By Opsis AB Distributor in Zagreb, CROATIA. from Differential Optical Absorption Spectroscopy (DOAS) System Product line

  • Premium

    AEREON - Recuperative Thermal Oxidizers

    AEREON's recuperative thermal oxidizers are complex incineration systems that are designed to destroy volatile organic compounds (VOCs) and hazardous air pollutants that are emitted from various processes. These oxidizers include heat recovery modules to preheat combustion air and incoming waste process streams to minimize fuel consumption for ...

    By AEREON Distributor in Reading, CROATIA. from Recuperative Thermal Oxidizers Product line

  • Premium

    ENVEA PCME - Model QAL260 Series - QAL1 Certified Particulate Analyzer

    The QAL 260 series is suitable for measuring dust concentrations in Combustion, Incineration and other industrial stacks and is compliant with EN 14181. Having a 0-15 mg/m³ certification range, the QAL 260 sensor can be used at low or high dust levels. Due to dynamic ranging, the sensor is also suitable for much higher dust levels found in ...

    By ENVEA Distributor in Zagreb, CROATIA. from QAL1 Certified Particulate Analyzer Product line

  • Premium

    ENVEA (ex Environnement S.A) - Model AMESA - Dioxin Monitoring System

    Traditionally, the monitoring of pcdd/fs is achieved by taking 1–3 short-term samples per year (each of 6 hours). However, over the past 10 years it was discovered that especially during start-up and shut-down periods of (state of the art) incinerators the dioxin emissions in the flue-gas can increase compared to normal operation up to ...

    By ENVEA Distributor in Zagreb, CROATIA. from Dioxin Monitoring System Product line

  • Premium

    AEREON - Catalytic Thermal Oxidizers

    AEREON's Catalytic Thermal Oxidizers/Catalytic Incinerators are designed to destruct hazarous air pollutants and volatile organic compounds in an effective manner. Basic design utilizes a catalyst to promote oxidation of the compounds and destruction is achieved at a lot lower temperature (600° F - 800° F) than a direct thermal oxidizer ...

    By AEREON Distributor in Reading, CROATIA. from Catalytic Thermal Oxidizers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you