Incinerator Equipment Near Lithuania
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury (TGM) is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's regenerative thermal oxidizers (RTO) are designed to provide maximum thermal efficiency while maintaining effective VOC/HAP. AEREON's RTOs are equipped with engineered high efficiency heat recovery beds for high heat recovery thus operating on very low fuel consumption. These systems are used in low solvent loading with high exhaust flow rates. ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's FIRECAT Thermal Oxidizers are simplest combustion devices that uses natural draft or forced draft burners and designed to maintain a specific destruction temperature and residence time to ensure thorough destruction efficiencies (98-99.99%). A FIRECAT system precisely monitors and controls the flow of air, assist gas, in order to obtain prescribed temperatures in the combustion chamber. ...
-
Manufactured by Castolin Eutectic GmbHbased in GERMANY
and chemical waste ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's recuperative thermal oxidizers are complex incineration systems that are designed to destroy volatile organic compounds (VOCs) and hazardous air pollutants that are emitted from various processes. These oxidizers include heat recovery modules to preheat combustion air and incoming waste process streams to minimize fuel ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Catalytic Thermal Oxidizers/Catalytic Incinerators are designed to destruct hazarous air pollutants and volatile organic compounds in an effective manner. Basic design utilizes a catalyst to promote oxidation of the compounds and destruction is achieved at a lot lower temperature (600° F - 800° F) than a direct thermal ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
atmosFIR CEM is a complete emissions monitoring system incorporating the atmosFIR 19” FTIR analyser. As completely hot and wet emissions measurement, atmosFIR CEM is ideal for complete measurement of multiple gases from applications such as incineration and power. A standard gas suite of NO, NO2, N2O, SO2, NH3, HCl, CH4, O2, CO2 and ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
The atmosFID Total VOC Analyser is designed for Continuous Emissions Monitoring (CEM) of gaseous VOC emissions from a wide range of sources – waste incineration, combustion sources, paint shops and manufacturing processes. As a 19” rack analyser it can be provided in a complete fixed emissions system from Protea, or can be ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
BS EN 14181 is a quality assurance standard relevant to plants operating under the Large Combustion Plant (LCPD) and Waste Incineration (WID) Directives. Quality Assurance Level 2 (QAL2) of this standard involves the parallel testing of the plant automated measurement systems (AMS) against a certified test house, making ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
Protea’s in-house Temperature Control Unit (TCU) has been designed to allow simple use of heated sample lines and heated sample probes with Protea’s range of gas analyser. The controller unit contains PID control for accurate set-point of heated sampling equipment, such as at 180°C for incineration monitoring ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
atmosFIR CEM is a complete emissions monitoring system incorporating the atmosFIR 19” FTIR analyser. As completely hot and wet emissions measurement, atmosFIR CEM is ideal for complete measurement of multiple gases from applications such as incineration and power. A standard gas suite of NO, NO2, N2O, SO2, NH3, HCl, CH4, O2, CO2 and ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
The 204M is a transportable CEM based on FTIR technology. Using the 204M for measurements of waste incineration and combustion plant process is as simple using an FTIR can be. With pre-loaded calibration methods for 28 gas species, automatic nitrogen purging, in-built pressure and temperature alarms, analogue and digital I/O it is a complete ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Memosens CPS16D is the digital allrounder for simultaneous pH and ORP measurement offering better process control and increased quality. The sensor features a dirt-repellent PTFE diaphragm for process and environment applications with long-term stable conditions. Thanks to Memosens digital technology, CPS16D combines maximum process and data integrity with simple operation. It resists corrosion ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Applicable for cement production, steel treatment, incinerators and fluidized bed furnaces. Measuring points with extremely high process temperatures require these special thermometers with ceramic or metal thermowells as well as thermocouples made from special metals, such as platinum and rhodium. The thermowell made from special ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Memosens glass electrode for standard applications. Orbisint CPS11D is the digital all-rounder for process and environmental technology. It measures reliably even in highly alkaline media or hazardous areas. Designed for low maintenance and a long operating life, the electrode offers you best value for money. Thanks to Memosens digital technology, CPS11D combines maximum process and data ...
-
Manufactured by JSC Stropuva ir kobased in LITHUANIA
You do not need to buy a new boiler because it is enough just to modernize the old boiler STROPUVA. STROPUVA P is a standard solid fuel boiler STROPUVA supplied with a fuel pellet feeder and a hopper. It remains an option to burn firewood, briquettes or coals. This is perhaps the cheapest pellet boilers which need almost any maintenance and have the alternative to burn almost any kind of solid ...
-
Manufactured by Bioversiobased in LITHUANIA
The Problem: In the oil industry, there are moments then oil contamination happens: when oil is extracted, transported, refined, used, etc. Solving these problems by old techniques, we face other issues: the solutions are not environmentally friendly, are not effective for a high concentration of oil; are not cost-effective, so companies prefer not to solve the problem at ...
-
Manufactured by Servomex - a Spectris Companybased in USA
High performance combustion process analysis of oxygen and combustibles, designed for use in the most hazardous and challenging locations. Armed with an integral sampling system custom-designed for operation in some of the hottest and most extreme combustion environments, the FluegasExact is the analyzer of choice for measuring oxygen and combustibles in the most demanding hydrocarbon processing ...
-
Manufactured by Servomex - a Spectris Companybased in USA
Compact TDL analyzer offers unique features low cost of ownership, with fast response to measuring ammonia in DeNOx applications. The SERVOTOUGH Laser 3 Plus Ammonia is a revolution in Tunable Diode Laser Absorption Spectroscopy analysis: a highly compact gas monitor for in-situ cross-stack applications, which delivers exceptional performance benefits in a revolutionary compact ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you