Inclinometer Equipment In Asia & Middle East
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
The new electronic NDW 2 inclinometer utilises a modern measurement method based on MEMS technology for gravitational inclination measurement (rotational angle ...
-
Manufactured by HMA Geotechnical a division of the HMA Groupbased in AUSTRALIA
The Model 7000 Biaxial Inclinometer System monitors the lateral displacement of embankments and structures. The probe is passed along the length of a grooved tube, which is placed in the borehole or attached to the structure. The system uses digital servo accelerometers to provide precise data on the magnitude and location of lateral ...
-
Manufactured by ACE Instrument Co., Ltd.based in SOUTH KOREA
Inclinometer casing is used for the portable inclinometer or in place inclinometer, comprised of three meters lengths of ABS pipe with four internal grooves spaced 90° degrees apart and running along the entire casing length. Inclinometer casing is typically installed in bore holes, but may also be embedded in fills, cast ...
-
Manufactured by Nanjing Sky MEMS co., ltd. (SkyMEMS)based in CHINA
INC1000M 0.01° China ModBus Inclinometer With Temp. Compensation from manufacturer is high performance single / dual axis RS485 Modbus inclinometer sensor with temperature compensation, and the temperature coefficient (-20~50 °C) is as low as ±0.0004º/ºC, it enjoys high accuracy: ±0.01° (room ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
Due to its reliable measurement of tilt angle, high mechanical strength and compact, robust design it is particulary suitable for use in demanding environments. The used MEMS sensor elements are designed for tough use in industrial and mobile automation. The high degree of protection IP67, the temperature range of -30 up to +70 °C, as well as the high shock resistance of 50g and vibration ...
-
Manufactured by Sisgeo Asia Pacific Co., Ltdbased in THAILAND
In-Place Inclinometer (double wheel-carriage) is specifically designed to combine the benefits of automatic monitoring and the selective installation of probes at different depths. This configuration allows a cost effective solution in those cases where the critical depths are known. Consequently the probes may be concentrated only in some ...
-
Manufactured by Solgeo srlbased in ITALY
The new inclinometer probe INCUS DH, designed by Solgeo, allows to perform a 3D borehole deviation survey; it is equipped with n. 3 magnetometrk and an n.3 accelerometric sensors. In case of iron casing which makes impossible the right working of the magnetometric sensors, the system is provided with a set of aluminium rod that allows to ...
-
Manufactured by Systel Instrumentation Service Pvt. Ltd.based in INDIA
Systel Horizontal Inclinometer used to measure vertical movement and settlement associated with many types of structure along the length of the ...
-
based in CHINA
BWN428 is a Cost-effective dual axis tilt sensor/inclinometer. Accuracy 0.02°, Resolution 0.001° With output 4-20mA ?0-20mA and 0-24mA optional and RS232 for debugging and setting measuring range via our free debug software. ...
-
Manufactured by Geokon Incbased in USA
The Model GK-604D Digital Inclinometer System is delivered in its entirety and includes a Model 6100D Digital Inclinometer Probe, a reel-mounted cable and a Field PC. The Model 6100D contains electronics to convert the analog voltage into a digital signal, which is transmitted by the control cable to the cable reel containing the Interface, ...
-
Manufactured by Encardio-Rite Electronics Pvt. Ltd.based in INDIA
The inclinometer casings can be installed in a borehole, embedded in fill or concrete during construction or fixed to the face of a completed structure. These are self-aligning ABS casings with longitudinal keyways at 90° for probe orientation. ...
-
Manufactured by Shenzhen Rion Technology Co., Ltdbased in CHINA
DMI820 is a digital display inclinometer which took RION company three years to develop professional for various industry angle controling and measuring.The core of this product is using the micro-mechanical control principle, dual-core measurement unit, can use the Y-axis to compensate X-axis during the measurement process,and then to use ...
-
Manufactured by Solgeo srlbased in ITALY
The new inclinometer carbon probe allows to perform a set of measurements of direction and inclination of boreholes in 3D space. The new carbon fiber body makes it light and easy to handle in difficult contests, for both horizontal and vertical boreholes, till 30mm diameter width. Instantaneous visualization of results acquired along ...
-
Manufactured by Shanghai Zhichuan Electronic Tech Co., Ltd.based in CHINA
This inclinometer probe is used for our in-place inclinometer ZCT-CX100, which is a high-precision sensor developed by Zhichuan Technology. The inclinometer has a maximum measuring range of ± 15 degrees, supporting MODBUS RTU protocol, suitable for construction and civil engineering safety monitoring ...
-
Manufactured by Shenzhen Rion Technology Co., Ltdbased in CHINA
DMI810 is a digital display inclinometer which took RION company three years to develop professional for various industry angle controling and measuring.The core of this product is using the micro-mechanical control principle, dual-core measurement unit, can use the Y-axis to compensate X-axis during the measurement process,and then to use ...
-
based in CHINA
Designed by Bewis Sensing Technology LLC, BWN466 is a cost-effective digital dual-axis inclinometer which output mode is RS485 and TTL optional. ...
-
Manufactured by Earth System s.r.l.based in ITALY
The borehole fixed probe is used for constant monitoring of landslides, slopes, retaining structures and embankments. It is placed at set depth inside inclinometer tubes fixed in the ground or onto structures where rotation needs to be ...
-
Manufactured by Samin Instrumentsbased in OMAN
These are ideally suited to long-term, precise monitoring of the position of a borehole over its entire length. By making a series of readings over time, it is also possible to monitor the rate of ...
-
Manufactured by Chongqing Gold Mechanical & Electrical Equipment Co.,Ltdbased in CHINA
The instrument is a new high precision, digital full space inclination measurement device. It is used for direction orientation and inclination measurement during engineering borehole, directional borehole, horizontal borehole, connection borehole, and other drilling hole in the non-magnetic area. It can provide depth, tool face angle, dip angle and azimuth angle of borehole. It has been widely ...
-
Manufactured by Sisgeo Asia Pacific Co., Ltdbased in THAILAND
B.R.A.IN (Borehole Readout Array for INclinometers) system is mainly composed by MEMS inclinometer probe, bluetooth reel with control cable and B.R.A.IN APP compatible with Android and iOS mobile operative systems. The electronis readout is integrated in the reel and the BLE (Bluetooth Low Energy) wireless protocol permits a fast and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you