Only show results in Virginia? Ok

Industrial Dust Control equipment

  • Industrial Dust Control Systems

    Industrial dust control systems including extraction filters, ducting and air pressure systems. Our range of solutions include installed cartridge and bag dust capture, fully customisable extraction units designed for aspiration in grain, biomass, pharmaceutical, recycling, metals and similar sectors.

    By Buttimer Engineering based in Cahir, IRELAND.

  • Premium

    Codel - Model DCEM2000 - Dual Pass Opacity/Dust Monitor (Integrated Version)

    The DCEM2000 is a dual-pass transmissometer configured for the continuous measurement of opacity and dust in flue gases. Opacity, Dust mg/m2, Normalised Dust mg/Nm2. The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Dust Monitors Product line

  • Premium

    Codel - Model DCEM2100 - Dual Pass Opacity / Dust Monitor

    The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or stack. Its dual-pass optical arrangement is based on twin transmissometers measuring in opposing directions through the same section of the gas stream, providing not ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Dust Monitors Product line

  • Premium

    EmiControls - Model L3 - Dust Abatement Sprayers

    The L3 lance is the first dust-control lance on the market. It is a compact and user-friendly solution for close-range applications. It works without a turbine, allowing it to get near to the source of dust. The spray action can be narrow and flat, fan-shaped or cylindrical, depending on the requirements in any given case. With its flexible spray ...

    By EmiControls based in Bolzano, ITALY. from Emission Controls Product line

  • Premium

    B&W MEGTEC - Evaporative Gas Cooling and Conditioning Systems

    Systems for improvement of baghouse performance, enhanced ESP performance and protection of process and air pollution control equipment. The B&W MEGTEC evaporative gas cooling and conditioning system helps to protect your downstream equipment, enhance air pollution control performance, reduce gas volumes and increase production capacity.

  • Premium

    Casella - Model Microdust Pro - Real Time Dust Monitor System

    Microdust Pro is a real-time, hand-held data-logging instrument for the detection of airborne dusts, fumes and aerosols. Ideal for walk through surveys and indicative measurements. The Microdust Pro is a real-time hand-held, data logging instrument for the detection of airborne dusts, fumes and aerosols. It is ideal for walk-through surveys and ...

    By Casella based in Kempston, UNITED KINGDOM. from Air Sampling - Real-Time Dust Monitor Product line

  • SMC Industrial - Dust Collection System

    In many industrial applications, especially in the bulk industry, dust problems affect the conveying process, the electrical and mechanical components and even more people and the envirement. Ddust is a new, ionization-based dust suppression system for controlling dust problems at ' belt conveyor transfer points '

    By Shelron Enterprises based in Mississauga, ONTARIO (CANADA). from SMC Industrial BV - Conveyor Belting Product line

  • Premium

    Land - Model 4500 MkIII - Compliance Opacity and Dust Monitor

    A high-specification opacity and dust monitor meeting global compliance standards for monitoring combustion processes. 4500 MkIII is the most accurate and reliable continuous opacity monitor available, combining AMETEK Land’s ground-breaking innovation and simple design for precise, problem-free operation. Unmatched, class-leading accuracy ...

    By AMETEK Land based in Dronfield, UNITED KINGDOM. from Opacity and Dust Monitors Product line

  • Premium

    Land - Model 4200 - Non-Compliance Dust Emissions Monitor

    Simple, lightweight dust and opacity monitor designed to measure emission levels in combustion processes where regulatory compliance is not required (for sale in Asia only). The 4200 dust and opacity monitor is AMETEK Land’s compact, cost-effective solution for the continuous monitoring of dust, smoke and particulates in a wide range of ...

    By AMETEK Land based in Dronfield, UNITED KINGDOM. from Opacity and Dust Monitors Product line

  • Premium

    Land - Model 4650-PM - Compliance Particulate Matter Monitor

    High-sensitivity, forward-scatter laser measurement for particulate matter, for use in combustion processes where condensed water is not present (for sale in the USA and China only). 4650-PM provides the stable, accurate low-range measurement of particulate matter in stacks and ducts where water droplets are not present in the flue gas. NOTE: The ...

    By AMETEK Land based in Dronfield, UNITED KINGDOM. from Opacity and Dust Monitors Product line

  • Baghouse Filters

    Increasing demand for a cleaner environment and requirements for lower particulate emissions from the manufacturing processes, result in baghouse air filters being widely used in resource industries. In principle, baghouses are industrial-sized vacuum cleaners. The difference between a baghouse and a household vacuum is the need to continuously ...

    By Allied Blower & Sheet Metal Ltd based in Surrey, BRITISH COLUMBIA (CANADA). from Dust Control Product line

  • Lignin Sulfonate

    Lignin sulfonate has long been recognized as an effective dust control agent for unpaved roads. Lignin is a co-product of the paper industry and is the “glue” that holds cellulose fibers together in trees. Lignin is extracted from wood during the pulping process, which makes lignin soluble in water. The adhesive properties of lignin ...

    By EnviRoad, LLC based in Portland, OREGON (USA). from Dust Control Product line

  • Dust Suppression Bowser

    Garic’s dust suppression bowsers are ideal for sites with high levels of dust and are a must for anyone in the demolition and quarrying industries. With dust levels presenting such a huge health and safety issue, it is crucial that you can source the right dirt and dust suppression system for the job at hand. Our powerful dust suppression ...

    By Garic Ltd. based in Pilsworth, Bury, UNITED KINGDOM. from Dust Control Product line

  • Allied - Centrifugal Fans

    Allied manufactures a wide range of centrifugal fans (radial blade, radial tip and backward inclined). These fans have been developed for long, maintenance-free operation in demanding industrial material handling processes. Allied’s fans are selected from standard designs to fit specific process requirements.

    By Allied Blower & Sheet Metal Ltd based in Surrey, BRITISH COLUMBIA (CANADA). from Dust Control Product line

  • Premium

    ASTIM - Screw Conveyors Used for Dust and Odor Control

    Screw conveyors are easily adapted to congested locations, due to their compact and flexible design; enabling horizontal, inclined and vertical installations. Screw conveyors are used for dust and odor free transport of numerous materials such as dewatered sludge, pulp, wood chips, sawdust, chemicals, slaughter-house refuse, garbage, scrap metal, ...

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Material Handling Systems - Conveyors Product line

  • Model MB - Dust Control Spray Cannon

    Garic is proud to hold the exclusive UK and Ireland distribution rights for MB Dust Control spray cannons. The range, one of the most robust, reliable and cost effective on the market, has an application solution for every type of site across a huge range of sectors including:

    By Garic Ltd. based in Pilsworth, Bury, UNITED KINGDOM. from Dust Control Product line

  • Earthbind - Model 100 - Modified Biopolymer Dust Control

    Earthbind 100 is a quality, versatile, and environmentally friendly modified biopolymer dust control agent. Earthbind 100 was developed to meet the need for a quality and environmentally friendly product that can be safely stored and easily applied. Earthbind® 100 is applied to successfully combat fugitive dust and to stabilize the road ...

    By EnviRoad, LLC based in Portland, OREGON (USA). from Dust Control Product line

  • Airwall - Contamination Control Booth (CCB)

    The AirWall provides a lower cost of operation. Equipped with energy efficient, low horsepower motors means you will minimize your energy costs by as much as 40 – 50%, compared to the horsepower required by most other equipment.

    By Envirosystems Manufacturing, LLC. based in Tucson, ARIZONA (USA). from Industrial Dust Collection Systems Product line

  • Duztech - Model A30 A40 A50 A60 - Heavy Duty Mist Cannons

    Duztech Heavy Duty mist cannons are built to last! Equipped with a strong chassis the machines are perfect for the  Demolition, Steel and Rental industry. All chassis components are hot dip galvanized. Features as electric tilt and automatic main valve as standard. Also standard is automatic swing operation to distribute the water mist over ...

    By Duztech AB based in Östersund, SWEDEN. from Dust Product line

  • Dust Suppression for Mining Operations

    The most effective, economical and environmentally sustainable dust control product for mining and industrial operations.EA1 can save up to 80% of the fresh water used in dust control activities. EA1 is also the only dust control product in the world which ingredients are organic approved

    By Earth Alive Clean Technologies based in LASALLE, QUEBEC (CANADA). from Dust Control Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you