industrial emissions Equipment

Particulate Scrubber for Industrial Emissions Control

• From:Particulate Control Solutions

Wet particulate scrubbers can be used to separate particulate from a flue gas stream, thereby reducing particulate emissions. B&W MEGTEC offers wet particulate scrubbers, including B&W’s Turbulaire® and Microdyne scrubber designs and the TurboVenturi scrubber to control emissions from many industrial process operations, including ...

E Instruments - Model E6000 - Hand-Held Industrial Emissions Analyzer

• From:Industrial Emissions Analyzers

The E6000 is a NEW hand-held industrial combustion flue gas and emissions analyzer that can have up to six gas sensors. The E6000 is an innovation portable emissions monitor for accurate measurements of stack gases from combustion processes including boilers, burners, gas and diesel engines, turbines, furnaces

BÜCHI - Model F-125 - Recirculating Chiller

• From:Industrial Evaporation

Make your R-220 SE independent of supply lines. Chiller, Rotavapor R-220 SE and vacuum pump from one compact unit, hosted on a trolley. Optimal for one or multiple units.

Soot-Trak - Real-Time Diesel Soot Mass

• From:Emissions Measurement & Analysis

The Sierra Instruments Soot-Trak laser measures real-time engine soot particle mass emissions and performs characterization of soot particle particle size, primary particle surface area and number. Soot-Trak provides researchers and engine developers the accurate information they require about particle transport. With measurement accuracy of 5% ...

Sierra - Model BG-3 Elite - High Performance Partial Flow Dilution System

• From:Emissions Measurement & Analysis

In use since 2004, BG3 PFD (Partial Flow Dilution) technology effectively performs engine research and development to accurately sample exhaust PM (Particulate Matter) emissions over both steady state and transient test cycles (Read Case Study). On January 7, 2011, PFD was signed into law and is now included in the United States Federal Register ...

E Instruments - Model E4500 - Hand-Held Industrial Combustion Gas & Emissions Analyzer

• From:Industrial Emissions Analyzers

The E4500 is a NEW hand-held industrial combustion gas and emissions analyzer that is a valuable tool designed for emissions monitoring and maintenance and tuning of combustion processes including boilers, burners, gas and diesel engines, turbines, furnaces, kilns, heaters, and laboratory analysis.

E Instruments - Model F900 - Forklift & Small Engine Exhaust Gas Analyzer

• From:Industrial Emissions Analyzers

The F900 is a hand-held exhaust gas analyzer designed for safety testing, engine tuning, and emissions compliance testing for forklifts, propane burnishers & polishers, propane grinders, and other small engines.

E Instruments - Model E8500-MK - Portable Emissions Analyzer Marine Kit

• From:Industrial Emissions Analyzers

The E Instruments E8500-MK Portable Emissions Analyzer Marine Kit can provide reliable and accurate measurements of O2, CO, CO2, True NOx(NO+NO2), SO2, and CxHy hydrocarbons to help ships achieve and confirm compliance with MARPOL AnnexVI and the NOx Technical Code and obtain IAPP certificati

E Instruments - Model E1500 - Portable Industrial Combustion Gas & Emissions Analyzer

• From:Industrial Emissions Analyzers

The E1500 is a NEW hand-held industrial combustion gas and emissions analyzer that is a valuable tool designed for maintenance and tuning of combustion processes including boilers, burners, gas and diesel engines, turbines, furnaces, kilns, heaters, and laboratory analysis.

E Instruments - Model E5500 - Portable Industrial Combustion Gas & Emissions Analyzer

• From:Industrial Emissions Analyzers

The E5500 is the most powerful and advanced portable gas analyzer on the market, and is a complete, portable tool for EPA compliance–level emissions monitoring.

E Instruments - Model E8500 Plus - Portable Industrial Combustion Gas & Emissions Analyzer

• From:Industrial Emissions Analyzers

The E8500 Plus is the most powerful and advanced portable emissions analyzer on the market, and is a complete, portable tool for EPA compliance–level emissions monitoring of boilers, engines, and other combustion equipment.

E Instruments - Model E9000 - Advanced Transportable Emissions Analyzer

• From:Industrial Emissions Analyzers

The E9000 is an advanced transportable emissions analyzer that is a complete, portable tool for EPA compliance–level emissions monitoring of boilers, engines, and other combustion equipment.

PLAZKAT - Air Cleaner for Recycling of Industrial Emissions

A Plazma Catalytic Reactor is a multiple block of reactors having a certain capacity.

Anguil - Emission Concentrator with Integrated Oxidizer

• From:Thermal & Catlytic Oxidizers

Typical air pollution control projects focus on the capture mechanism and a destruction device. With regulations driving towards higher capture efficiencies, combustion devices must treat larger volumes of air with lower concentration of pollutants. The Anguil rotor concentrator is an adsorption system designed to concentrate large volume, low ...

Opgal - Model EyeCGas FX - Fugitive Emissions Detection Automatic Camera

• From:Optical Gas Imaging

Gas Leak Detection Equipment That Enhances Safety. Building on the success of the handheld EyeCGas camera, EyeCGas FX from Opgal is the next generation fixed camera for installation in factories. EyeCGas FX is specially designed for the natural gas, oil and petrochemical industries and is tailored to user requirements.  EyeCGas FX enables you ...

Industrial Emissions Analyzer (CO, CO2, H2O, O2)

• From:Carbon Dioxide (CO₂) Analyzers

LGR’s new Industrial Emissions Analyzer (CO, CO2, H2O, O2), IEA, is the world’s first laser-based instrument capable of simultaneous measurements of carbon monoxide, carbon dioxide, water vapor and oxygen. The IEA is simple to use, sensitive, and rugged which makes it ideal for continuous emissions monitoring, industrial process ...

LGR - Industrial Emissions Analyser (CO, CO2, H2O, O2)

• From:Off-Axis ICOS Analysers for Scientific and Research - Trace Gas Analysers

LGR’s new Industrial Emissions Analyser (CO, CO2, H2O, O2), or IEA, is the first laser-based instrument capable of simultaneous measurements of carbon monoxide, carbon dioxide, water vapor and oxygen. The IEA is simple to use, sensitive, and rugged which makes it ideal for continuous emissions monitoring, industrial process control and ...

Industrial Emissions Analyzer (CO, CO₂, H₂O, O₂)

• From:Industrial Emissions Analyzers

LGR’s new Industrial Emissions Analyzer (CO, CO2, H2O, O2), IEA, is the world’s first laser-based instrument capable of simultaneous measurements of carbon monoxide, carbon dioxide, water vapor and oxygen. The IEA is simple to use, sensitive, and rugged which makes it ideal for continuous emissions monitoring, industrial process ...

Model L3 - Dust Abatement Sprayers

• From:Emission Controls

The L3 lance is the first dust-control lance on the market. It is a compact and user-friendly solution for close-range applications. It works without a turbine, allowing it to get near to the source of dust. The spray action can be narrow and flat, fan-shaped or cylindrical, depending on the requirements in any given case. With its flexible spray ...

ECO PHYSICS - Model CLD 63 Ox - Gas Analyzer

• From:Industrial Applications

Nitrogen oxide emissions need the oxygen content as reference. This is what the new analyzer CLD 63 Ox from ECO PHYSICS is made for: It measures both concentrations at once! Chemiluminescence and paramagnetic detectors - the standard reference methods.