industrial hygiene Equipment in Netherlands

27 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: industrial hygiene ×

  • In: Europe ×

  • In: Netherlands ×

Model 825 - Hygienic Pump with Pumphead

by Watson-Marlow Fluid Technology Group     Office in NETHERLANDS

Designed for low-shear sanitary pumping duties up to 33l/min (8.7gpm) and pressures up to 3.5 bar in the biotechnology, pharmaceutical and food industries, 800 series pumps feature a true CIP (clean-in-place) and SIP (steam-in-place) facility. The twin stainless steel rollers disengage to lift off the USP Class VI Bioprene or STA-PRE tube, ...


Verderflex - Model VF - Hose Pump

by Verderflex Peristaltic Pumps - part of the Verder Group     Office in Groningen, NETHERLANDS

The Verderflex® range of industrial hose pumps are a proven high quality family of peristaltic pumping solutions. These pumps reduce downtime, minimise maintenance costs and provide easy to operate and reliable solutions in difficult pumping situations. Advantages of the Verderflex® VF Hose Pump • Specially designed hose construction ...

Model KMW - Hygienic Level Switch

by Kiay Instruments BV     based in Dwingeloo, NETHERLANDS

The hygienic level switch KMW is microprocessor based and can be installed in any position in tanks or piping systems. The measuring principle is an electromagnetic wave. A high frequency signal sweep is radiated from the sensor tip into the tank or pipe. The medium acts as a virtual capacitor. This virtual capacity will depend of the dielectric ...

NIRMaster - Model Pro IP65 - FT-NIR at Highest Protection

by BÜCHI Labortechnik AG     Office in AC Hendrik-Ido-Ambacht, NETHERLANDS

The NIRMaster Pro IP65 is the world’s first dedicated FT-NIR standalone spectrometer with IP65 protection class. Its hygienic design is certified to be resistant to water jet cleaning procedures. It fully meets the requirements for safety of quality control instruments used in dairy and meat food production.

INNOVA 1316 - Multi-Gas Monitor

by LumaSense Technologies, Inc.     Office in Sint Willebrord, NETHERLANDS

The Multi Gas Monitor INNOVA 1316 is the first in a new family of gas analysis instruments for use in a wide variety of industrial applications. The instrument provides an affordable, highly reliable, and very accurate multi-gas solution that can be used in numerous applications e.g.: Fermentation Monitoring, Refrigerant Leak Detection, Landfill ...

NIRMaster - FT-NIR Top Performance

by BÜCHI Labortechnik AG     Office in AC Hendrik-Ido-Ambacht, NETHERLANDS

Control the quality and nutritional facts of your feed, pet-food, milling and bakery products rapidly. The NIRMaster is the world’s first dedicated FT-NIR standalone spectrometer available in food-grade PMMA or stainless steel. The accuracy and reproducible performance of polarization FT technology plus the hygienic design with certified ...

Stainless Steel Hygenic Mixers / Agitators

by CTech Europe Ltd.     Office in Weert, NETHERLANDS

Stainless steel hygienic mixers / agitators have been designed in response to demand from the pharmaceutical and cosmetics industries. Bespoke designs are available to meet client's specific needs.

Model 812 - Sound Level Meter

by Larson Davis, a division of PCB Piezotronics     Office in NETHERLANDS

There exists a need to select an instrument that will do just what you need it to do. The 812 was designed with this in mind. For example, a consultant that works heavily in the industrial hygiene sector will greatly benefit from having the Model 812, a hand held data logging integrating sound level meter and a personal noise dosimeter.

Thermophant - Model T TTR35 - Temperature Switch

by Endress+Hauser     Office in Naarden, NETHERLANDS

Cost efficiency, optimal use of space, reliable operation and easy commissioning indicate modern process measuring technology. The temperature switch completely fulfills these requirements in the Food & Beverage as well as in the Life Science industry. Designed for safe monitoring of process temperatures it can be selected between one or two ...

Endress+Hauser - Model iTHERM TM411 - Innovative Advanced, Modular RTD Thermometer

by Endress+Hauser     Office in Naarden, NETHERLANDS

It has been designed to meet the requirements of the Food & Beverages and Life Sciences industries and complies with the highest quality standards. It offers a variety of versions within a clearly segmented standard product. The result: Time and cost savings by simple and fast product selection. It offers many technical innovations: iTHERM ...

GEM Trap - Model Topaz - Hygienic Venturi Orifice Steam Trap

by Thermal Energy International Inc.     Distributor in NETHERLANDS

The GEM Trap is a staged venturi orifice steam trap. It has no moving parts so will not wear and cannot fail. The unique venturi orifice technology utilises the expansion of the flash steam created by the pressure differential across the trap to control the flow of condensate. Operating over variable loads, the GEM Trap will suit all industrial ...

ANDRITZ - Gouda Paddle Dryer / Cooler Machine

by ANDRITZ Separation - a division of the Andritz Group     Office in Waddinxveen, NETHERLANDS

The machine has a heated through, containing rotating heated paddle shafts. The specially shaped paddles do not have a transport function but are designed for maximum heat transfer. This results in an excellent control of the temperature of the product and enables a uniform product quality. At the outlet side, the product moves out of the machine ...

Model 720 - Sound Level Meter

by Larson Davis, a division of PCB Piezotronics     Office in NETHERLANDS

The 720 was designed to do just what you need it to do. For example, a consultant that works heavily in the industrial hygiene sector will greatly benefit from having this hand-held data logging integrating sound level meter and, by removing the nose cone and revealing the 1 meter microphone extension cable, a personal noise dosimeter. The ...

Mobile Compactors (MC)

by Hyva Holding B.V.     based in Alphen aan den Rijn, NETHERLANDS

The Mobile Compactors (MC) are closed systems to compact and store waste which can be placed at any location and do not require ground fixing or housing in a special building. These compactors have high volumetric efficiency and compaction ratio, rubber seals and power pack with frequency control design. These features deliver many benefits, ...

Model NP6-series - Industrial Centrifugal Pump

by Packo Inox NV     Distributor in Vleuten, NETHERLANDS

3 cost effective pumps in electropolished stainless steel 316L. It is the pump with the highest efficiency in its range.Open cast impeller, non clogging, ideal for liquids with small solids.Connections: Flanges (drilled to EN1092-1/2) or BSP. Standard IEC-motors.Heads up to 2.75 bar. Flow rates up to 45 m³/h. Up to 2.2 kW. Efficiencies are in ...

Model F-Type - Decanter

by ANDRITZ Separation - a division of the Andritz Group     Office in Waddinxveen, NETHERLANDS

With more than 15.000 decanter centrifuges installed, F-type decanter, especially designed for the food industry, meets the most demanding separation requirements. Your application is specific? Our F-type decanter is it also!

ANDRITZ Gouda - Drum Dryer

by Andritz Gouda - Andritz Group     based in Waddinxveen, NETHERLANDS

For more than a century, food products have been dried industrially. Since its early years ANDRITZ Gouda has been specialized in food processing lines, based on advanced drum drying technology. Nowadays it is used for a large range of products, from baby food to chemicals. This continuous indirect drying method allows short heat retention times ...

Sierra InnovaSonic - Model 205i - Clamp-on Ultrasonic Flow Meter

by Sierra Instruments, Inc.     Office in Egmond aan den Hoef, NETHERLANDS

Sierra's InnovaSonic® 205i clamp-on ultrasonic flow meter incorporates the latest developments in digital signal processing to deliver highly accurate and repeatable

Need help finding the right suppliers?

Let the XPRTs do the work for you