Only show results in Virginia? Ok

Industrial Sensor equipment

  • Premium

    OTT Hydromet - Model Pluvio² L - Weighing Rain Gauge

    The OTT Pluvio² L is an all-weather precipitation gauge that uses superior weight-based technology to measure the amount and intensity of rain, snow, and hail. Developed in conjunction with industry-leading meteorological services, the OTT Pluvio² L employs a high-precision load cell and algorithms that compensate for wind, temperature, ...

    By The OTT Hydromet Group based in Kempten, GERMANY. from Meteorological Sensors Product line

  • Premium

    InPro - Model 7250ST - PEEK Conductivity Sensor

    The InPro 7250ST electrodeless sensor made of PEEK is highly resistant to aggressive chemicals and may be used for most routine applications. Main fields of application are in the chemical industry (CPI) as well as monitoring industrial effluents. A variety of available process adapters allows simple installation into almost every type of process.

  • Premium

    BD|SENSORS - Model DCT 531 - Pressure Transmitter

    The DCT 531 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data will transfer in binary form. Due to the usage of high quality ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    InPro - Model 8050 - Turbidity Sensor For Wastewater Applications

    The InPro 8050 turbidity sensor is used for the measurement of suspended solids in industrial wastewater applications. A system is completed with a Trb8300 transmitter and an appropriate sensor housing such as InDip 550.

  • Premium

    BD|SENSORS - Model DMP 331 Pi - Pressure Transmitter

    The precision pressure transmitter DMP 331Pi demonstrates the further development of well-tried industrial pressure transmitter DMP 331P. The signal from the specially designed piezoresistive stainless steel sensor is processed by the newly developed digital electronic system, performing thus an active compensation of sensor-specific deviations ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    BD|SENSORS - Model DMP 331 P - Pressure Transmitter

    The pressure transmitter DMP 331P was designed for use in the food and pharmaceutical industry. The compact design with hygienic process connections makes it possible to achieve an outstanding performance in terms of accuracy, temperature behavior and long term stability. The modular construction concept allows a combination of various process ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    BD|SENSORS - Model DMP i - Pressure Transmitter

    The precision pressure transmitter DMP 331i and DMP 333i demonstrate the further development of our industrial pressure transmitters. The signal processing of sensor signal is done by digital electronics with 16-bit analog digital converter. Consequently it is possible to conduct an active compensation and the transmitters with excellent ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    BD|SENSORS - Model DMP 339 - Pressure Transmitter

    The DMP 339 industrial pressure transmitter features a G ¼' flush pressure port and was designed for the use in a range of machinery including metering systems. It is ideal for measuring the pressure of viscous and pasty media, as only a small dead space is created. Material accumulation, dripping and stringing in machinery is eliminated. This ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    Rotavapor - Model R-220 Pro - Industrial Evaporation System

    The Rotavapor R-220 Pro family includes four platforms to meet the challenging needs of scale-up and production laboratories: maximum flexibility with the widest variety of glass assemblies, high performance for fastest distillation rates, continuous operation with automatic draining and refilling, and an economical model to cover essential needs.

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND. from Industrial Evaporation Product line

  • Premium

    InPro - Model 7250HT - PEEK Conductivity Sensor

    The InPro 7250HT electrodeless sensor made of PEEK is highly resistant to aggressive chemicals and suitable for applications in hazardous areas. The sensors wide temperature range from -20 to 180°C (-4...356 °F) and its technical specifications allow the sensor to be used for the majority of all electrodeless conductivity applications. ...

  • Premium

    InPro - Model 7000-VP - 2-electrode Conductivity Sensor

    The 2-electrode sensor InPro 7000-VP is extremely accurate and can be used in pure and ultrapure water applications. The wide measuring range allows this cell to be used in all applications with conductivity ranging from ultrapure water up to diluted salt solutions. METTLER TOLEDO 2-electrode sensors for the chemical industry are extremely ...

  • Premium

    InPro - Model 7001-VP - 2-Electrode Conductivity Sensor

    The 2-electrode sensor InPro 7001-VP is a highly accurate conductivity cell for pure and ultrapure water applications such as demineralization or desalination. The 12 mm body and the common PG 13.5 thread allows installation through most standard ports. The cell is steam-sterilizable up to 131 °C. The 2-electrode sensor from METTLER TOLEDO ...

  • Premium

    Dissolved CO2 Sensors

    METTLER TOLEDO's advanced dissolved carbon dioxide (CO2) sensor series, InPro 5000i, is specially designed for use in sterile/hygienic processes (fermentation) in the pharmaceutical industry. Made of FDA-compliant materials, with highly polished surface finish to facilitate cleaning, they fully meet international regulations such as EHEDG.

  • Premium

    BD|SENSORS - Model DCT 532 - Pressure Transmitter

    Contrary to the industrial pressure transmitter with analog signal, the DCT 532 has a digital i²C-interface. Due to the usage of high quality materials and components, the DCT 532 is suitable for almost every industrial application, if medium is compatible with stainless steel 316L. The modular concept of the pressure transmitter allows ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    BD|SENSORS - Model DMK 331 - Pressure Transmitter

    The industrial pressure transmitter DMK 331 with ceramic sensor has been especially designed for pasty, polluted or aggressive media and for oxygen applications at low pressure range. As with all industrial pressure transmitters made by BD|SENSORS, you may choose between various electrical and mechanical connections also on DMK 331.Features:- ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    BD|SENSORS - Model DMP 321 - Pressure Transmitter

    The pressure transmitter DMP 321 is the consistent further development of our in many applications approved DMP 331. It shows an improved signal behavior and sets new standards in the industrial class. Its metallic diaphragm made of stainless steel (1.4435 / 316L) offers a good corrosion resistance in many industrial processes.The modular device ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • MicroSet - Model pH 01 - Industrial pH Sensors

    Range : 0~14 pH. Body : Epoxy with Glass Bulb. Type : Combination. Sensor Output : mV. Pressure : 5 Bar. Temperature:0~80°C. Junction : Double Junction Ceramic. Process Connection : ½” & ¾” BSP Male. Mounting : Pipeline mounting. Cable Length : 5 Meter with BNC connector.

    By MicroSet Controls based in Pune, INDIA. from Industrial pH Sensor Product line

  • Premium

    BD|SENSORS - Model DMK 331 P - Pressure Transmitter

    The pressure transmitter DMK 331P is suitable for measuring the pressure of viscous and pasty media, where a totally flush pressure port is required. As on all industrial pressure transmitters made by BD|SENSORS, you may choose between various electrical and mechanical connections also on DMK 331P.Features:- nominal pressure: 0 ... 60 bar up to 0 ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    BD|SENSORS - Model DPT 200 - Differential Pressure Transmitter

    The differential pressure transmitter DPT 200 has been especially designed for the process industry and can be used for level measurement of closed, pressurized tanks, pump or filter controlling, etc.The possibility passes different pressure seals at the DPT 200 adding with different membrane materials to reach an optimal adaptation to the ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    BD|SENSORS - Model DPT 100 - Differential Pressure Transmitter

    The differential pressure transmitter DPT 100 has been especially designed for fast test processes in leakage and flow measurement, where a fast response time and high sampling rate are necessary.The compact design of the DPT 100 facilitates the use in standardised applications, e. g., and the installation in 19“ Rack.The DPT 100 with optionally ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you