Industrial Waste Recycling equipment in California

  • Premium

    TOMRA - Model X-Tract - Waste Separator with X-Ray Technology

    Cutting edge X-ray sensors empower the X-TRACT for special sorting tasks. By combining X-ray transmission (XRT) and DUOLINE technology, TOMRA's X-TRACT enjoys superior recognition of secondary resources - irrespective of input material desity. Through TOMRA's exclusive high-speed X-ray processing technology, customers benefit from an exceptional ...

    By TOMRA Sorting GmbH. Office in Sacramento, CALIFORNIA (USA). from Recycling Products Product line

  • Premium

    TOMRA - Model Autosort Laser - Sorting Machine

    High throughput, high consistency and high product yield at peak performance owing to LASER state-of-the-art technology. TOMRA Sorting maintains its leadership by the brand new AUTOSORT LASER and its patented system amongst a range of applications.

    By TOMRA Sorting GmbH. Office in Sacramento, CALIFORNIA (USA). from Recycling Products Product line

  • Model CIX 20 - Water Recycling Using Ion Exchange System

    Integrated skid-mounted ion exchange system for closed-loop recycling of rinses with TDS < 450 mg/l and pH 3-10 to produce deionized water up to 25-gpm. At $6/1000-gal, the CIX is 75% less costly than using rinsewater once only then waste-treating & discharging and is 95% less costly than service deionization (SDI).

    By Water Innovations, Inc based in Escondido, CALIFORNIA (USA). from Industrial Water Recycling Product line

  • Model HFX - High Flow Ion-Exchange Water Purification System

    Designed  to produce deionized water by either closed-loop rinsewater recycling or from potable feed water as alternative to service deionization exchange.

    By Water Innovations, Inc based in Escondido, CALIFORNIA (USA). from Industrial Water Recycling Product line

  • Recycling Sorting Equipment

    CP is recognized as the World Leader in Separation Technology for many reasons. We have been supplying the waste and recycling industry with advanced separation technology for nearly 4 decades, leading the industry and continuously raising the bar with innovation and new technology.

    By The CP Group based in San Diego, CALIFORNIA (USA). from Recycling Equipment Product line

  • Municipal Solid Waste Recycling

    The CP Group is leading the industry in Municipal Solid Waste (MSW) Recycling. With much of the industry heading towards MSW material mixes, we have stayed ahead of the technological curve to provide the most advanced systems and equipment to get the job done.

    By The CP Group based in San Diego, CALIFORNIA (USA). from Material Recovery Facility Product line

  • Organic Waste Recycling System

    Greenbelt Resources is an innovator of sustainable energy production systems that delivers modular solutions designed for localized processing of locally generated wastes into locally consumed products. The small-scale, end-to-end modular systems designed, engineered and implemented by the Company, enable production of commercially viable (without ...

    By Greenbelt Resources Corporation based in Paso Robles, CALIFORNIA (USA).

  • ANDRITZ MeWa - Refuse Derived Fuels (RDF) Production Plants

    ANDRITZ Recycling supplies specific technologies, processes and equipment for the conversion of waste to energy. This includes equipment for shredding, screening, classification and drying. The outcome is valuable goods, such as high-calorific RDF, as well as non-combustible fractions.

    By ANDRITZ MeWa - ANDRITZ Group Office in San Leandro, CALIFORNIA (USA). from Andritz MEWA Recycling Plants Product line

  • ANDRITZ MeWa - Model UC - Universal Rotary Shear

    When volume needs to be reduced, waste to be prepared for incineration or material to be shredded for subsequent treatment, the Universal Rotary Shear UC forms the basis for a successful recycling process. Whether you have bulky material, tires, textiles or massive metal parts – the Universal Rotary Shear UC shreds the material in a ...

    By ANDRITZ MeWa - ANDRITZ Group Office in San Leandro, CALIFORNIA (USA). from Andritz MEWA Recycling Machines Product line

  • ANDRITZ MeWa - Model UG Series - Universal Granulator

    The Universal Granulator UG of ANDRITZ Recycling processes a variety of different materials to high quality results and convinces in particular due to the dynamic application and the shredding results. The Granulator UG series consists of four different machine sizes: The Granulators UG 600, UG 1000, UG 1600 and UG 2000. The equipment of the ...

    By ANDRITZ MeWa - ANDRITZ Group Office in San Leandro, CALIFORNIA (USA). from Andritz MEWA Recycling Machines Product line

  • Mark-Costello - Medical Waste Grinder Shredder

    The Mark-Costello Company designs and manufactures the most complete range of medical waste processing and hospital waste sterilization equipment in the world today. We also incorporate world class components into our systems and in the case of shredding and grinding medical waste, we have the best grinder shredded available manufactured by ...

    By The Mark-Costello Co. based in Paramount, CALIFORNIA (USA). from Medical Waste Sterilizers Product line

  • Zero Liquid Discharge (ZLD)

    Brine treatment and wastewater discharge is a challenge for many industries and needs to be done safely while meeting environmental regulations. But the ideal situation is ZLD (zero liquid discharge), a complete closed loop cycle where discharge is eliminated. IDE partners with customers, particularly in the oil & gas and power industries, to ...

    By IDE Technologies Office in Carlsbad, CALIFORNIA (USA). from Industrial Water Treatment Product line

  • PurOxys - Acid Recycling Systems

    Exergy’s PurOxys is a state-of-the-art technology that uses ion exchange membranes to purify and recycle used or spent industrial acids. The membranes are installed in single or multiple stacks that are supported in a plate and frame structure. Exergy’s patent pending “one-piece” membrane spacers creates compartments with ...

    By Exergy Technologies Corporation based in San Jose, CALIFORNIA (USA).

  • Sirco - Model PS-10 NDT - Rinse Water Recycle System

    The Sirco PS-10 NDT rinse water recycle system uses a unique blend of filtration, absorption, deionization and oxidation technologies to achieve the only 100% closed loop recycling solution. Due to our unique configuration, the Sirco PS-10 NDT system requires very minimal maintenance and almost no operator intervention. The components of the PS-10 ...

    By Sirco Industrial, Inc. based in Huntington Beach, CALIFORNIA (USA).

  • Eccomate - Municipal and Industrial Odor Control

    Eccomate will instantly on contact neutralize organic volatile organic compounds, offering exceptional noxious odor control and reduction of VOC emissions. It’s a highly concentrated bio-catalytic composition designed to form highly reactive micro-bubbles within water that have extraordinary oxygen transfer capabilities across the membrane ...

    By Bio-Organic Catalyst, Inc. based in Costa Mesa, CALIFORNIA (USA).

  • Model CLRS-10 - Fully Automatic Rinse Recycle System

    This system is fully automatic, skid mounted with receiving tank and distribution tank mounted to the skid and ready to collect, treat and return DI water to the rinses.  It is also self-regenerating as necessary and only needs a supply of acid and caustic – About 5 gal of 50% HCL and 4 gal 50% Naoh and a waste holding tank of about150 ...

    By Sirco Industrial, Inc. based in Huntington Beach, CALIFORNIA (USA). from Ion Exchange Systems Product line

  • GREENMAX - Model APOLO C200 - Recycling Styrofoam with GREENMAX A-C200 compactor

    GREENMAX is specialized in the foam industry and manufactures recycling systems that enable the EPS and many other foam materials to reuse as much as possible in their production.The waste foam can be compacted at the ratio of 50:1 with our GREENMAX APOLO C200 compactor. Before compacting 50 trucks were needed to take the EPS to recycling centers ...

    By Greenmax recycling based in Los Angeles, CALIFORNIA (USA).

  • Water & Waste Management

    Technica USA and our partners CJI Process Systems, DMP Corporation and Lee Engineering have over 100 years combined experience in treating industrial water in manufacturing applications worldwide. Our alliance provides the smartest solutions to your water and wastewater needs. Our systems are specifically engineered for each client keeping your ...

    By Technica, U.S.A. based in San Jose, CALIFORNIA (USA).

  • GLES - Waste Conversion Pyrolysis System

    The Waste Conversion Pyrolysis System is well suited to handle various feedstocks.Pyrolysis of waste is the state-of-the art process providing destructive decomposition of waste materials in the absence of oxygen. Its combustion-free methodology allows us to eliminate residual and fly ash emission into the environment. GLES' leading edge design ...

    By Greenlight Energy Solutions Corp. based in San Francisco, CALIFORNIA (USA).

  • GREENMAX - Model APOLO C100 - EPS recycling with GREENMAX APOLO C100 compactor

    GREENMAX is specialized in the foam industry and manufactures recycling systems that enable the EPS and many other foam materials to reuse as much as possible in their production.The waste foam can be compacted at the ratio of 50:1 with our GREENMAX APOLO C100 compactor. Before compacting 50 trucks were needed to take the EPS to recycling centers ...

    By Greenmax recycling based in Los Angeles, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you