Inflatable Packer equipment available in Virginia

  • Reflex - Inflatable Packer

    The ReFlex packer is a fixed-end packer with a fully-reinforced element. This packer can be used for applications that require moderate expansion ratios in casing or open borehole conditions (100 to 200 psi unconfined pressure rating). It has the following advantages: Cost-effective solution for moderate expansion ratio applications. Ideal for low ...

    By Baski, Inc. based in Englewood, COLORADO (USA). from Packers Product line

  • TAM-J - Inflatable Packer

    The TAM-J is an inflatable packer that utilizes TAM's field-proven multi-set setting mechanism. The tool is able to conduct multiple inflate/deflate cycles in one run, allowing a wide array of applications.

    By TAM International based in Houston, TEXAS (USA). from Multi-Set Tools Product line

  • Tigre Tierra - Inflatable Packers

    Tigre Tierra Inflatable Packers, designed and manufactured by Aardvark Packers, range from simple fixed-head balloon packers to steel-reinforced sliding-head Viton and stainless steel monitoring systems with multiple transducers and pumps. In addition, we offer our patented Tigre Tierra Wireline Packer Systems for permeability testing during core ...

    By Aardvark Packers based in Altus, OKLAHOMA (USA). from Environmental Product line

  • SkyQuip - Inflatable Packers

    The Kec-Inflatable packer is a very versatile packer; The 4 3/4' OD packer will handle bore sizes ranging from 5' to 7'. Another plus to the Inflatable packer is its ability to form to the various differeences in the well itself, giving a tighter and safer seal.

    By Sky Quip, LLC based in Sterling, MASSACHUSETTS (USA). from Hydro-Frac Equipment Product line

  • Baski - Medium-Duty Inflatable Packers

    Baski's Medium Duty Packer is our most popular sliding-end packer. It is a versatile tool for a wide range of hole sizes and depths. Standard construction includes aluminum, steel or stainless steel metal parts and a reinforced natural rubber element; however, special oil resistant covers and all stainless steel metal parts can be ordered.

    By Baski, Inc. based in Englewood, COLORADO (USA). from Packers Product line

  • BIMBAR - Model ZI 28-17omm - Double Inflatable Packers

    Each single packer from 0 28mm to 0 -17omm can easily be transformed into a double packer assembly by adding a speci-fic element : the central element CE. Just unscrew the sliding end from the single packer and replace it with the CE element. Complete the installation by screwing a standard inflatable element S (sleeve) and a plug PL on the lower ...

    By Geopro S.A. based in Mons, BELGIUM. from Inflatable Packers Product line

  • Inflatable Packer Options

    QSP designs all of our packers modularly and the majority of packers are purchased for use as a single packer.  Monitoring equipment such as pressure transducers, thermistors, conductivity probes, pH probes, or injections ports are common uses with perforated pipe for injection testing.  Testing equipment can include bladder pumps, ...

    By QSP Packers, LLC based in Sumner, WASHINGTON (USA).

  • BIM BAR - Model 28 — 170 Mm - Inflatable Single Packers

    Geopro manufactures a complete range of inflatable single packers available in nine different diameters from 0 28mm up to 0 170mm. These packers are mainly used for cement grouting, permeability testing...

    By Geopro S.A. based in Mons, BELGIUM. from Inflatable Packers Product line

  • Inflatable Grout Packers

    A typical grouting job uses either inflatable or mechanical packers.  The selection is determined based on the condition of the borehole, the depth of the hole and what support equipment is readily available. Inflatable packers range in length form 10” up to five feet or more.  They are specifically designed for depths more ...

    By QSP Packers, LLC based in Sumner, WASHINGTON (USA).

  • Kale Grup - Inflatable Borehole Packer

    Inflatable borehole packer is an auxiliary equipment used in; washing the borehole during the drilling and grouting works, in the pressure water tests and hydraulic tests, in hatch and curtain injections during dam and pond constructions, in contact and consolidation injections during tunnel constructions and in similiar works. Injection packer is ...

  • WTP BIMBAR - Model 42-170 mm - Double Packers

    Geopro has developped a double packer « WTP » especially designed for Lugeon and water testing. It is available in sizes from 42 up to 170 mm.

    By Geopro S.A. based in Mons, BELGIUM. from Inflatable Packers Product line

  • Double Packers

    The double packer is a system equipped with two infl atable elements. The pump is positioned between  two infl atable packers.This confi guration allows  selective pumping. The production zone is isolated from the remainder of the bore hole. The distance between the two infl atable elements is adjustable. It is possible to mount the pump ...

    By Geopro S.A. based in Mons, BELGIUM. from Water Wells Inflatable Packers Product line

  • Reflex - Packers for Cementing at Lake Powel

    Six of these 40' OD fixed-end Reflex packers were used for cementing on 36' casing.

    By Baski, Inc. based in Englewood, COLORADO (USA). from Custom Inflatable Packers Product line

  • Baski - Donut Packers for Swiss Tunnel

    Two custom 'donut' packers were designed and manufactured to seal off the annual gap between the wall of a tunnel and and steel liner inside of it. These packers were approximately 11 feet in diameter and 2 ft wide each.

    By Baski, Inc. based in Englewood, COLORADO (USA). from Custom Inflatable Packers Product line

  • Baski - Grouting Packers- Baseline Reservoir

    A series of custom low pressure packers were made to allow sliplining of an existing 18' clay pipe through a earthen dam that was failing.  These packers allowed phased grouting from both the upstream and downstream sides of the dam.  This prevented the need to breach the high hazard dam and replace the outlet by conventional excavation.

    By Baski, Inc. based in Englewood, COLORADO (USA). from Custom Inflatable Packers Product line

  • Swage Packer

    Corrosion of the casing is a very common and frequent  problem  in water  wells. The  “swage packer” method allows to carry out quickly and effi ciently a local repair or a  complete re-lining of water wells without compromising the existing production  capacity of the well.The method  consists of ...

    By Geopro S.A. based in Mons, BELGIUM. from Water Wells Inflatable Packers Product line

  • Aardvark Packers - Environmental Packers

    At Aardvark Packers, we design and manufacture a variety of inflatable packers used in Environmental applications.  As an example, we have looked at our manufacturing processes and developed a 1.70” OD fixed end packer that houses (3) 3/8” stainless steel pass thru tubes which can now be used for (four) injection or sampling zones ...

    By Aardvark Packers based in Altus, OKLAHOMA (USA). from Environmental Product line

  • Frac-Packer™ - Well Rehabilitation System

    The FRAC-PACKER is a multi-purpose down-hole tool designed for use in hydro-fracturing, pressure grouting, acid injection, zone test-pumping, and environmental applications. When activated by a 10,000 psi pump on the surface, a unique hydraulic cylinder compresses 4 rubber seals that lock on borehole walls or casing. Average 'setting' time is 1 ...

    By Flatwater Fleet, Inc based in Saginaw (Duluth), MINNESOTA (USA).

  • Baski Fracker - Versatile Sliding-End Packer

    The Baski Fracker is a versatile sliding-end packer for use in single- or straddle-type configurations to increase water production from low yielding wells. Other applications include: hydrology testing, geotechnical investigations, grouting, and rock stress testing. Frackers are available for hole sizes ranging from 3' to 20', where the most ...

    By Baski, Inc. based in Englewood, COLORADO (USA). from Packers Product line

  • Model P160 - Pump for Packers Inflation with Waters

    Geopro supplies a large range of air driven pumps. Six pump ratios are available from ratio 10 for output pressure of 70 bar/1025psi up to ratio 115 for a maximum output pressure of 800 bar/11400psi. The output pressure is related to the pump ratio multiplied by the air inlet pressure. Our pump ratio 10 is specially well adapted to the inflation ...

    By Geopro S.A. based in Mons, BELGIUM. from Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you