Inhalable Particle Equipment
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
Inhalable particle content is one of the most important indexes for measuring air quality. Combining years of experience in developing environment and safety monitoring instruments as well as the latest demand at home and abroad, our company has launched a new generation DPM-6000 pm 2.5 measurement device with high accuracy, reliability, ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters ...
-
Manufactured by Tri-Mer Air Pollution Control Systemsbased in USA
Particulate emissions are tiny particles and droplets in the air that are made up of hundreds of different chemicals. Most are formed in the atmosphere as a result of chemical emissions from power plants, industries and automobiles. To reduce PM pollution, the EPA regulates inhalable particles smaller than 10 ...
-
Manufactured by Brechtelbased in USA
Most particles in the atmosphere take up water when exposed to increasing relative humidity – this often explains the poor visibility during the early morning hours when the relative humidity is high and particles have swollen in size and more effectively scatter solar radiation. When we inhale particles they also grow into ...
-
Manufactured by Dustraction Ltdbased in UNITED KINGDOM
downwards through the perforated surface, which reduces fine dust particles being inhaled by the operator. The air is then filtered and passed through a fan, before being discharged at low level back to the workshop. ...
-
Manufactured by InsightAir Europebased in BULGARIA
InsightAir’s industrial air quality sensor measures temperature, relative humidity, CO2, VOC, PM2.5 including Suspended Particulate Matter (PM100). PM100 is related to the total inhalable fraction of particles (coarse dust) in the air, which is regulated by the authorities in European countries. The sensor is connected through a local ...
-
Manufactured by TCR-Tecorabased in ITALY
MDI Metered Dose Inhalers; DPI Dry Powder Inhaler. Aerodynamic particle sizing. The design concept of the Andersen Cascade Impactor evolves from the following information: The human respiratory system tract is an aerodynamic classifying system for airborne particles. A sampling device can be used as a substitute for the ...
-
Manufactured by TSI Incorporatedbased in USA
The RESPICON™ Particle Sampler is a lightweight, compact device for measuring human exposure to airborne particle concentrations in the workplace. The RESPICON uses a single sampling head to model the human respiratory tract and simultaneously determine the three most critical particle fractions: inhalable, thoracic, and ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
The Westech 7 (W7) is Westech’s version of the Next Generation Impactor (NGI), a Seven Stage Cascade Impactor with Micro-Orifice Collector conforming to all the critical dimensions defined for USP Apparatus 5 & 6 and EP Apparatus E. The W7 is a multi-jet impactor with 8 removable collection cups and a convenient single tray design with operating flowrates between 15 and 100 ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
Westech 7 is the newest innovation in impactor sampling technology, suitable for dry powder inhaler testing, metered dose inhaler testing, nebulizer testing & nasal spray testing. The W7 is a Seven Stage Cascade Impactor with Micro-Orifice Collector conforming to all the critical dimensions defined for USP Apparatus 5 & 6 and EP ...
-
Manufactured by Livermore Instruments Inc.based in USA
The Livermore Instruments Aerodynamic Focusing Lens Interface draws particle laden air from the environment and delivers the particles into vacuum as a tight particle beam. A result of years of research at Lawrence Livermore National Laboratory and the subject of two patents*, the interface focuses far larger particles than any ...
-
Manufactured by Noruco S.L.based in SPAIN
Self- filtering mask in accordance with EU regulation 2016/425 regarding personal protective equipment. Composition: - Product tested and approved in accordance with the UNE-EN 149:2001+A1:2009 standard. ...
-
Manufactured by EHC Teknik ABbased in SWEDEN
We have developed diesel particulate filters (DPF) that can handle the conditions that mining vehicles are used in. Without these filters, diesel particulate matter can spread through underground mines. It pollutes the air and poses serious health risks. ...
-
Manufactured by Ionerbased in SPAIN
The P-DustMonit unit is an instrument for measuring and registering in continuation particles present in the air. Laser scattering is the method used by P-DustMonit for measuring the particles that make up the atmospheric particulate and class them based on their dimensions. Laser scattering allows immediate and continuous measurement of ...
-
Manufactured by Cubic Sensor and Instrument Co., Ltdbased in CHINA
PM5000S optical particle counter is based on laser scattering technology, which can accurately detect and calculate the number of different size suspended particles in the air per unit volume. The built-in intelligent identification for different air/dust source that could automatically identify dust source and ambient air to give ...
-
Manufactured by Cubic Sensor and Instrument Co., Ltdbased in CHINA
PM2009L laser particle sensor module is based on laser scattering technology, which can detect suspending particle number in the air, output real-time particle quantity concentration in pcs/L and mass concentration in μg/m3 accurately via mathematical algorithm and scientific ...
-
Manufactured by Cubic Sensor and Instrument Co., Ltdbased in CHINA
Laser particle sensor PM2012 is designed with the smallest & ultra-thin structure. Adopts light scattering principle to measure and calculate the suspending particle number which is within unit volume on the air and real-time output particle mass concentration in μg/m3 directly via mathematical algorithm and scientific ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The Zefon Inhalable Dust sampler is a reusable filter cassette with a sampling head designed to measure the worker's exposure to inhalable particulates and respirable dust. When sampling at the recommended flow rate of 2 LPM, it collects a particle size distribution that includes particles of 100 micron and smaller. This meets ...
-
Manufactured by Cubic Sensor and Instrument Co., Ltdbased in CHINA
PM2008 laser particle sensor module is based on laser scattering technology, ultra-thin (12mm) designed with all metal shielding. Detecting particle concentration size between 0.3μ-10μm in the air and real-time output PM1.0,PM2.5,PM10 in μg/m3 directly via mathematical algorithm and scientific ...
-
Manufactured by Ionerbased in SPAIN
The PersonalDustMonit unit is an instrument for measuring and registering in continuation particles present in the air. Laser scattering is the method used by PersonalDustMonit for measuring the particles that make up the atmospheric particulate and class them based on their dimensions. Laser scattering allows immediate and continuous ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you