Inline Check Valve Equipment In USA
-
Manufactured by Arcmed a Halma companybased in UNITED KINGDOM
Inert Flow Path, no metal parts Choice of EPDM, Viton, or Perfluoroelastomer check element PEEK or PPS housing materials Check against backflow pressure to 100 psi Small Internal Volume Low Cracking Pressure Gravity Independent installation The Bio-Chek self-sealing in-line check valves feature an inert flow path, no metal ...
-
Manufactured by Tideflex Technologies - a Division of Red Valve Company, Inc.based in USA
Patented by Red Valve Company, the CheckMate Inline Check Valve is ideal for backflow prevention and odor mitigation. In outfalls, stormwater, CSO and SSO applications, the CheckMate's custom-engineered, all-rubber unibody design eliminates costly backflow from oceans, rivers and interceptors. CheckMate Valves ...
-
Manufactured by WaStop International ABbased in SWEDEN
WaStop inline check valves have been an industry leader since their inception in 2000. Developed on the same principles that are the foundation of Wapro, WaStop’s ingenious function combines common sense and simplicity, to provide our customers with the best possible protection against flooding, odour control and ...
-
Manufactured by WaStop International ABbased in SWEDEN
The revolutionary patented and certified Wastop® inline check valve can be installed in minutes in a pipeline or chamber. It can be installed either horizontally or vertically and either at an inlet or outlet. WaStop® can be installed to prevent backflow in all cases. Flow in the normal direction causes a slight pressure buildup ...
-
Manufactured by Delta Power Companybased in USA
#8 SAE, inline check valve. OPERATION: The IM-CVA allows flow from (2) to (1), while normally blocking oil flow from (1) to (2). The valve has a guided check ball, which is spring-biased closed until sufficient pressure is applied at (2) to open to ...
-
Manufactured by NP Medical Inc.based in USA
The NP Medical Inline Check Valve is the valve of choice for market-leading infusion therapy OEMs. This normally closed valve is designed to open at low fluid pressures in the flow direction and prevent backflow into the primary IV line from secondary (piggyback) sets. With over a billion valves ...
-
Manufactured by WaStop International ABbased in SWEDEN
The PVC Series was designed to enable retro-fitting with ease. We identified the most common pipe sizes for residential type installations to be 75mm - 200mm. We then designed a WaStop range to be installed inline on existing lines. WaStop Residential is a standard range available off the shelf for fast delivery. Our distribution network ...
-
Manufactured by Onyx Valve Companybased in USA
The series DBCP in-line check valve is a simple, reliable, cost effective method of backflow prevention. The series DBCP check valve is designed to be installed between two mating flanges. The simple maintenance-free elastomer with a flanged connection eliminates the mechanical parts which can wear and jam in conventional ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex Style 750 jacketed flanged rubber check valves are designed with a full metal enclosure, for easy installation within existing piping ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex Style 770 and 780 wafer style rubber check valves feature many design benefits, including: All-rubber construction to resist abrasive slurries. NSF 61 standard construction. Ultra-quiet operation, with no water hammer. Unique design to prevent backflow. Negligible maintenance and energy costs. Will not warm or freeze. ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex Style 740 slip-on in-line rubber duckbill check valves are designed to slip directly into an existing pipe, and are supplied with an expandable clamp to secure it in ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex 720 in-line flanged rubber duckbill check valve is designed to fit directly inside of an existing pipe. This particular valve is supplied with a flat face rubber flange, which allows installation between existing pipe flanges, and eliminates the need for a valve body. Various drilling standards are available ...
-
Manufactured by JAECO Fluid Systems Inc.based in USA
Spring-loaded, compact, 316 stainless steel, inline check valves, available in 1/4", 3/8", 1/2", 3/4" and 1". Cracking pressures of 2lbs or 10lbs with seal material options of Viton and PTFA. Purchase online: ...
-
Manufactured by Insite Instrumentation Group, Inc.based in USA
The Model 10PI Sensor is intended for inline monitoring in a large diameter pipe. The mount is 2' NPT thread in 316 stainless steel that works with a customer supplied 2' Thread-O-Let. The integrated jet clean with this sensor includes an inline check valve. There is a flow indication groove on the back of the sensor mount that ...
-
Manufactured by Insite Instrumentation Group, Inc.based in USA
The M-20PI Sensor is intended for inline monitoring in a large diameter pipe. The mount is 2" NPT male thread in 316 stainless steel that works with a customer supplied 2" Thread-O-Let. The integrated jet clean with this sensor includes an inline check valve. There is a flow indication groove on the back of the sensor mount that ...
-
Manufactured by Veljan Groupbased in INDIA
Veljan Inline Check Valves are available in three basic sizes, viz 03 (3/8"), 06 (3/4"}, and 10(1 1 /4"}.The sizes can be extended with the help of fittings according to a dimensional table. These zero leak valves are suitable for mounting inline with piping. Series VIC check ...
-
Manufactured by Veljan Groupbased in INDIA
Veljan Inline Check Valves are available in three basic sizes, viz 03 (3/8"), 06 (3/4"}, and 10(1 1 /4"}.The sizes can be extended with the help of fittings according to a dimensional table. These zero leak valves are suitable for mounting inline with piping. Series VIC check ...
-
Manufactured by Insite Instrumentation Group, Inc.based in USA
The M-20HT Sensor combines the ease of use of a hot tap mount with the reliability of the InsiteIG DO Sensor. The mount is a 2" NPT male thread in 316 stainless steel that works with a customer supplied 2" Thread-O-Let, saddle or existing piping. The integrated jet clean includes an inline check ...
-
Manufactured by Insite Instrumentation Group, Inc.based in USA
The Model 10T Sensor is intended for inline Dissolved Oxygen monitoring utilizing a by-pass loop. The by-pass loop is generally configured using customer supplied full port ball valves on both sides of the tee. The supplied tee (as shown) is 3' Schedule 80 PVC, with slip connections. The integrated jet clean with this sensor includes an ...
-
Manufactured by Insite Instrumentation Group, Inc.based in USA
The M-20T Sensor is intended for inline dissolved oxygen monitoring utilizing a by-pass loop. The by-pass loop is generally configured using customer supplied full port ball valves on both sides of the tee. The supplied tee (as shown) is 3" schedule 80 PVC, with slip connections. The integrated jet clean with this sensor includes an inline ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you