We couldn't find any jetting system equipment suppliers or service providers located in Prince Edward Island

Here is a list of equipment results with suppliers serving Prince Edward Island

jetting system equipment available in Prince Edward Island

  • Premium

    Grande - Model ACU-JET - Jet Regulator System

    The ACU-JET Jet Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 235 gpm (15 L/s) to a maximum of 32 000 gpm (2 000 L/s) for upstream water levels varying from 0 to 40 feet (12 m). The ACU-JET Jet Regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Jet Regulator System Product line

  • Electric H2O - Sweeper Jet System

    Electric H2O, Inc. introduces the newest sweeper jet designed specifically for cooling tower basins. In order for cooling tower filters to do an effective job removing solid contaminants from the cooling tower basin, the solid particulates must be directed toward the filter inlet. Electric H2O’s Sweeper Jet nozzles achieve this through a ...

    By Electric H2O, Inc. based in Westminster, COLORADO (USA).

  • CropKing - Fan Jet System

    In controlled environments where a precise tempering of air is critical to production, American Coolair offers the Power Tube Fan.~ Coolair Power Tube Fans are specially designed units developed for compatibility with polyethylene tubes. For the necessary low velocity tempering of air, these fans and tubes are perfectly matched.

    By CropKing Inc. based in Lodi, OHIO (USA). from Fan Jet System Product line

  • RauschUSA - Model M-Series - Lateral Launch Jetting System

    The Rausch Lateral Launch Jetting System (LLJ) uses water pressure to propel the pan & tilt KS60CL lateral camera through the lines. By utilizing a steering pin, the LLJ launches into laterals from the mainline. LLJ150 application range is 6' - 8' pipe diameter (8' - 48' with the LLJ200).

    By Rausch Electronics USA, LLC. based in Chambersburg, PENNSYLVANIA (USA). from Lateral Launch Jetting System Product line

  • NexJet - Model NJ-8 - Jetting System with ReadiSet Jet Cartridge

    The NexJet 8 Jetting System with ReadiSet Jet Cartridge offers increased jet frequency combined with advanced consumable management - it's as easy as ReadiSet and Jet: ReadiSet Jet Cartridge reduces operator training time, cost-of-ownership, and production downtime. 300 Hz continuous operation pneumatic actuation for increased flow-rates and ...

    By Nordson EFD based in East Providence, RHODE ISLAND (USA). from Jetting System with ReadiSet Jet Cartridge Product line

  • MTS - Jet Mixing Systems

    The MTS jet mixing systems are a highly turbulent submerged mixer technology.  Jet mixing is a hghly efficient method to distribute mixing energy while minimizing horsepower requirements. Each MTS mixing jet nozzle consistes of of two liquid nozzles nested together.  The primary flow is typically provided by either a dry-pit or ...

    By Mass Transfer Systems (MTS) based in Walpole, MASSACHUSETTS (USA). from Jet Mixing Systems Product line

  • KLa - Jet Mixing System

    Jet Mixers offer superior independent control of mixing and oxygen transfer in aerobic/anoxic processes and creates excellent energy distribution while minimizing power input in large tanks. This mixing technology results in better energy distribution and decreased reaction times.

    By KLa Systems, Inc. based in Assonet, MASSACHUSETTS (USA).

  • Vari-Cant - Jet Aeration Systems

    Superior jet aeration technology in wastewater treatment. VARI-CANT Jet Aeration systems combine state-of-the-art design and materials, result in superior performance, efficiency, and easy operation.The system intermixes air with a motive liquid and injects the stream into wastewater. The liquid is discharged from an inner nozzle into an ...

    By Evoqua Water Technologies LLC based in Warrendale, PENNSYLVANIA (USA). from Jet Aeration Systems Product line

  • Jet Aeration System

    Fluidyne Jet Aeration provides an economical and effective approach to oxidizing and mixing wastewater. Jet Aeration Systems are ideal for both industrial and municipal activated sludge processes including SBRs, oxidation ditches, extended aeration and BNR. Due to their flexibility, large solids handling capability and efficiency, jets are also ...

    By Fluidyne Corporation based in Cedar Falls, IOWA (USA). from Jet Aeration System Product line

  • ClearFlo - Jet Aeration Systems

    ClearFlo jet aeration systems offer state of the art aeration and mixing for a wide variety municipal and industrial wastewater and process applications.

    By ClearStream Environmental Inc. based in Sandy, UTAH (USA). from Jet Aeration Systems Product line

  • KLa - Jet Aeration System

    Jet Aerators transfer oxygen by simultaneously introducing large volumes of high kinetic energy liquid and air through a series of jet nozzles. The high velocity liquid exits the inner, primary jet and rapidly mixes with the incoming air in the outer jet. This intense mixing and high degree of turbulence in the gas/liquid cloud travels outward ...

    By KLa Systems, Inc. based in Assonet, MASSACHUSETTS (USA).

  • Jet Aspiration System

    Jet aspiration is a simple, efficient and cost effective solution to wastewater treatment and mixing problems. Liquid from the tank is pumped through a specially designed double nozzle assembly which aspirates air into the mixing section. The combined air/liquid plume is then discharged below the surface to provide high oxygen transfer and ...

    By Fluidyne Corporation based in Cedar Falls, IOWA (USA). from Jet Aspiration System Product line

  • Falch - Model Base Jet 30 1000-14-0-E Overpack - Maximum Pressure Water Jet System

    Basic system with a fully galvanised and powder coated base frame. easy to transport by fork-lift, crane, trailer, truck or on ships. this system was designed for applications where the ratio of maximum jetting power to minimum outer dimensions is crucial, for example, in cramped conditions on building sites, ships, industrial buildings and plants ...

    By Falch GmbH based in Blaubeuren-Seissen, GERMANY. from Maximum Pressure Water Jet System Product line

  • NLB - Model 350 Series - High-Pressure Water Jetting Systems

    The 350 Series water blasting units bring higher horsepower to users who want to stick with a triplex pump.  Models are available ranging in horsepower from 355 to 425 hp (261-317 kW) and with pressure from 8,000 to 20,000 psi (552-1,400 bar).

    By NLB Corp. based in Wixom, MICHIGAN (USA). from High-Pressure Water Jetting Systems Product line

  • NLB - Model 605 Series - High-Pressure Water Jetting System

    What does one do with a pump that has 600 hp (447 kW) and pressures to 40,000 psi?  Why, whatever one wants.  The 605 Series diesel-powered units are the 800 pound gorillas of the water blasting world.  With power and flexibility to spare, if your application can’t be tackled by one of these units, it can’t be tackled at ...

    By NLB Corp. based in Wixom, MICHIGAN (USA). from High-Pressure Water Jetting System Product line

  • Falch - Model Base Jet 30 500-28-0-E Overpack - High Pressure Water Jet System

    High pressure water jet system 500 bar, 28 l/min, electric engine. Basic system with a fully galvanised and powder coated base frame. easy to transport by fork-lift, crane, trailer, truck or on ships. this system was designed for applications where the ratio of maximum jetting power to minimum outer dimensions is crucial, for example, in cramped ...

    By Falch GmbH based in Blaubeuren-Seissen, GERMANY. from High Pressure Water Jet System Product line

  • Falch - Model Base Jet 30 500-28-0-D - High Pressure Water Jet System

    High pressure water jet system 500 bar, 28 l/min, diesel engine steel safety frame as a precaution against damage and downtimes as well as to simplify transportation and attachment to vehicles. Water filter for consistently clean water quality. Crankshaft pump slow-running for maximum load capacity and durability. servicing and maintenance costs ...

    By Falch GmbH based in Blaubeuren-Seissen, GERMANY. from High Pressure Water Jet System Product line

  • Falch - Model Cont Jet 125 2500-26-0-D - Maximum Pressure Water Jet System

    Maximum pressure water jet system 2500 bar, 26 l/min, diesel engine. Container system with integrated base frame section. easy to transport by container fork-lift, crane, trailer or by truck. this system was developed for outdoor applications or in large industrial complexes where all the technical equipment of the system is installed in a closed ...

    By Falch GmbH based in Blaubeuren-Seissen, GERMANY. from Maximum Pressure Water Jet System Product line

  • NLB - Model 225 Series - High Pressure Water Jetting Systems

    There are probably more NLB 225 Series water blasting units at work in the field today than any other single model, regardless of manufacturer.  With units ranging in horsepower from 200 to 300 hp (149-224 kW) and pressures from 4,000 to 40,000 psi (275-2,800 bar) its performance lands it squarely in the middle of a host of ...

    By NLB Corp. based in Wixom, MICHIGAN (USA). from High Pressure Water Jetting Systems Product line

  • NLB - Model 125 Series - High-Pressure Water Jetting Systems

    This innovative line of high pressure water jetting units are designed around the model 125 convertible pump.  This pump, with its quick-change, in-line fluid end design, has fewer parts for increased operating efficiency and simpler maintenance. And, it requires only a simple conversion kit to operate at pressures between 6,000 and 40,000 ...

    By NLB Corp. based in Wixom, MICHIGAN (USA). from High-Pressure Water Jetting Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you