Only show results in Texas? Ok

laboratory exhaust equipment

  • CECO HEE-Duall - Laboratory Exhaust Fan

    HEE’s HPC-0800 laboratory fan is ideally suited for lab or backdraft hoods requiring 300 to 900 cfm of air flow with static pressures in the range of 1/8” to 1” maximum. This fan is powerful, light weight and compact. This fan typically operates on 110 volt 60 Hz power and is available with an optional speed controller.

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO HEE-Duall - Exhaust Fans Product line

  • LF-SERIES LABORATORY EXHAUST BLOWER

    The KCH LF-Series Lab Fans are available in a wide range of materials including Poly-Vinyl Chloride, Polypropylene, FRP and Stainless Steel. These fans are compact, lightweight and maintenance free. Each fan is direct driven and includes a TEFC Motor. The impeller is constructed of Polypropylene for complete corrosion resistance.

    By KCH Services, Inc. based in Forest City, NORTH CAROLINA (USA).

  • Buddeberg - Model Up to 40 L - PLR Compressed Air Laboratory Stirrers with Exhaust Air Vent - GA

    PLR compressed air laboratory stirrers with exhaust air vent 'GA' up to 40 L for use in potentially explosive atmospheres. PLR compressed air laboratory stirrers are designed for all kinds of standard mixing tasks. The vane type, air-driven motor offers a high power density and is significantly lighter and smaller than an equivalent electric ...

    By Buddeberg GmbH based in Mannheim, GERMANY. from PLR Compressed Air Lab Stirrers Product line

  • Premium

    BioPROtect - Model III Class II Style - Walk-In Clean Air and Containment Enclosures

    Designed expressly for high volume robotic and equipment applications: The popularity of robotically assisted technologies has resulted in the continuing development of the BioPROTECT Series of walk-in and reach-in biological safety enclosures. Through the innovative use of robotic technology for drug discovery, high-throughput screening, and ...

    By The Baker Company based in Sanford, MAINE (USA). from Containment Enclosures Product line

  • Premium

    BioChemGARD - Model e3 - Class II Type B2 - Biological Safety Cabinet

    The most energy efficient, comfortable and safe B2 cabinet in the industry. The BioChemGARD e3 is a breakthrough in total-exhaust biological safety cabinets. Engineered specifically for laboratories that need containment and removal of vapors, mists and particulates, the BioChemGARD e3 has a revolutionary airflow system that increases users’ ...

    By The Baker Company based in Sanford, MAINE (USA). from Biological Safety Cabinets Product line

  • Premium

    Lab Crafters Air Sentry - High Performance Fume Hoods

    The need to protect personnel from potentially harmful vapors and airborne particulate matter is a fact of life for every modern laboratory. Laboratory Fume hoods are ventilated workstations designed to contain hazardous fumes and exhaust them away from the researcher. Traditional fume hood designs have relied upon high airflow volumes and face ...

    By The Baker Company based in Sanford, MAINE (USA). from Fume Hoods Product line

  • Premium

    Questron - Laboratory Scale Compact and Efficient Exhaust Fume Scrubber

    Our Fume Scrubber works with a minimum of 30 PSI scrubber reagent inlet pressure and has an all-plastic acid and alkali resistance construction. The benchtop stand to sit on is included in our fume hood scrubber system and it connects to hoods and instruments using 5” ID flexible tubing.

    By Questron Technologies Corporation based in Mississauga, ONTARIO (CANADA). from Lab Utility Products Product line

  • Premium

    Teledyne CETAC - Model ENC DC Series - Autosampler Enclosures

    ENC series DC Autosampler Enclosures won’t just protect your samples and employees, they will protect your peace of mind. 

    By Teledyne CETAC Technologies based in Omaha, NEBRASKA (USA). from Automation Product line

  • Air flow controller - Model FS-4000-SS - Flow Science

    Flow Sciences Fan/Filter units are designed to work in one housing to pre-treat and decontaminate exhaust from workstations and small containment devices before exiting to the general laboratory exhaust or recirculating back into the laboratory. Flow Sciences filtration systems are available in a unique Fan/Filter unit that can be connected by a ...

    By Alliance Analytical, Inc (AAI) based in South Sanfrancisco, CALIFORNIA (USA). from Air Flow Controller Product line

  • SUREFLOW Adaptive Offset Controller

    SUREFLOW™ room controls are designed to maintain room balance in Variable Air Volume laboratories by ensuring that the exhaust is greater than or less than the supply by a set volume. SUREFLOW controls also directly control heating and cooling in the space to maintain a comfortable temperature. TSI's controls are able to go the additional step and ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Critical Environments Monitors/Controllers Product line

  • Fume Hood

    Our Fume Hood allows for great versatility with any of our system.  It attaches to your existing exhaust system, so that you can work on the bench top.  The Fume Hood includes a HEPA filter and duct tubing to connect to the laboratory's negative flow exhaust system.  If you do not have a negative flow exhaust, you can order an ...

    By Thomas Cain, Inc. based in Mequon, WISCONSIN (USA).

  • Ventsorb - Model 55-gallon - Canisters Contain

    VENTSORB canisters, each containing 180 pounds of activated carbon, are ideal for low-flow air purification applications at industrial and municipal facilities. These economical adsorption systems control small volume organic contaminants and/or odorous gas emissions from: Storage tank vents, Reactor vents, API separator vents, Sludge thickener ...

    By Calgon Carbon Corporation based in Moon Township, PENNSYLVANIA (USA). from Air/Gas Adsorption Equipment Product line

  • Schneider - Model FC500 - Fume Hood Controllers

    Depending on the configuration the following operating modes for fume hood control are possible: fully variable control FC500-V, constant control FC-500-K (1, 2 or 3 point), face velocity control FC-500-F, position sensor control FC-500-W. Microprocessor based security system for control and monitoring of the containment-safe operation of fume ...

    By Hans Schneider Elektronik GmbH based in Steinbach, GERMANY. from Fume Hood Controllers Product line

  • Dr. Thiedig + Co KG - Laboratory Systems

    As system providers, we also offer the planning and realisation of complete laboratories to our industrial and power station customers. You can profit from our long-standing experience in the planning and realisation of individual laboratories.

    By Dr. Thiedig GmbH & Co KG based in Berlin, GERMANY.

  • Room Group Controller - GC 10

    The GC10 room group controller automatically and decentrally balances the setpoints for laboratory room control (room supply and exhaust air). The room air change rate requirements of DIN 1946, Part 7 are taken into account and are freely programmable. Negative room pressure (in laboratories) or positive room pressure (in clean rooms) may be ...

    By Hans Schneider Elektronik GmbH based in Steinbach, GERMANY.

  • MS Noise - Dissociator Noise Reduction Enclosure

    MS Noise enclosures for dissociators products range accommodate all major models of Dissociators from all manufacturers.These products reduce the typical noise of an operating dissociator unit to a tolerable level (noise reduction by approx. - 20dBA). It allows operation of dissociator cleaning units in sensitive working areas, such as in ...

    By MS Noise based in Sens, FRANCE.

  • Sheldons - Model D2 Series - PVC Bifurcated Axial Fan

    Series 2100 PVC Bifurcated Axial Fan. Sheldons solid PVC Bifurcators were designed to meet the need for an absolutely non-corrosive fan to handle the exhaust fumes from chemical laboratory fume cabinets. With its axial flow arrangement, the Bifurcator is suited to installation in ductwork with the minimum of elbows or  transitions.The fan can ...

    By Sheldons Engineering based in Mississauga, ONTARIO (CANADA). from Air Handling Axial Product line

  • MS Noise - Ultrasonic Bath Noise Reduction Enclosure

    MS Noise enclosures for ultrasonic bath products range accommodate all major models of Ultrasonic bath from all manufacturers (Elma, Branson…).These products reduce the typical noise of an operating ultrasonic unit to a tolerable level (noise reduction by approx. - 20dBA). It allows operation of ultrasonic cleaning units in sensitive ...

    By MS Noise based in Sens, FRANCE.

  • Model SS-330-E - Exhaust Hood

    Sentry Air’s 30” Wide Ducted Exhaust Hood may be an excellent choice for industrial applications that require a compact, exterior-ducting fume hood. This bench-top unit features unique hinged folding side panels, a high-density polyethylene base, a clear polycarbonate top, and a polycarbonate hinged sloping front lid. It is extremely ...

    By Sentry Air Systems, Inc. based in Cypress, TEXAS (USA). from Exhaust Hoods Product line

  • Model SS-350-E - Exhaust Hood

    Sentry Air's 50' Wide Ducted Exhaust Hood may be an excellent choice for industrial applications that require a compact, exterior-ducting fume hood. This bench-top unit features unique hinged folding side panels, a high-density polyethylene base, a clear polycarbonate top, and a polycarbonate hinged sloping front lid. It is extremely compact and ...

    By Sentry Air Systems, Inc. based in Cypress, TEXAS (USA). from Exhaust Hoods Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you