Only show results available in Connecticut? Ok

laboratory filtration system equipment

  • Sterlitech - Autofil Laboratory Filtration System

    The Autofilâ„¢ laboratory filtration system is a disposable, sterile, vacuum operated system used for the preparation of buffers, tissue culture media, microbiological media and other biological fluids. Autofilâ„¢ is available either as a complete system or as a bottle-top filter.

    By Sterlitech Corporation based in Kent, WASHINGTON (USA). from Pressure and Vacuum Filtration Product line

  • Sterlitech - Autofil Bottles

    To complement the Autofil™ Laboratory Filtration System, Sterlitech offers a line of specially designed storage bottles.

    By Sterlitech Corporation based in Kent, WASHINGTON (USA). from Filters - Sterile Disposable Filter Systems Product line

  • Autofil Laboratory Filtration Systems

    The Autofil laboratory filtration system is a disposable, sterile, vacuum operated bottle-top filter system used for the preparation of buffers, tissue culture media, microbiological media and other biological fluids. Autofil filters are available either as a complete system or as a stand-alone bottle-top filter funnel.

    By Sterlitech Corporation based in Kent, WASHINGTON (USA). from Filters - Sterile Disposable Filter Systems Product line

  • Air flow controller - Model FS-4000-SS - Flow Science

    Flow Sciences Fan/Filter units are designed to work in one housing to pre-treat and decontaminate exhaust from workstations and small containment devices before exiting to the general laboratory exhaust or recirculating back into the laboratory. Flow Sciences filtration systems are available in a unique Fan/Filter unit that can be connected by a ...

    By Alliance Analytical, Inc (AAI) based in South Sanfrancisco, CALIFORNIA (USA). from Air Flow Controller Product line

  • Sebo Automatic XP1 Vacuum

    The world’s most technically advanced professional vacuum cleaner. Full anti-allergy – S-Class Filtration– SLG Chemnitz Research Laboratory, Germany. Full static electricity discharge system. The advanced sensor controls all functions i.e. height, brush speed, air flow etc. The advanced electronics control the automatic warning ...

    By EPSCO LLC based in Dubai, UNITED ARAB EMIRATES.

  • Labware

    Modern requirements to quality of production, new standards in medicine and science toughen the requirements forthe laboratory analysis and accuracy of received results. For this reason we work with the most precision and reliable analytical equipment, we involve the most qualified experts for the problems being solved in the following areas: ...

    By Spectrolab ZAO based in Minsk, BELARUS.

  • Model BV200-A - Filtration System

    The BV200-A is a single user filtration system for use primarily during hand soldering to contain and filter the soldering fumes that are generated.

    By BenchVent based in Killinghall, Harrogate, UNITED KINGDOM. from Laboratory Product line

  • Donaldson - Air Oil Separators

    Development and customized design of air/oil filtration systems improves compressor performance. A new laboratory helps us to continually improve our technology. Our full range of traditional wrapped and pleated media separators deliver high filtration efficiency and longer life, plus boast greater energy efficiency too.

    By Donaldson Company, Inc. based in Minneapolis, MINNESOTA (USA). from Compressed Air & Gas Filtration- Compressor Filtration Product line

  • SpinTek - Tubular Membranes - Ultrafilter Modules

    Tubular Ultrafiltration Membranes from SpinTek provide excellent capabilities for filtering and concentrating difficult process and waste streams. The tubular membrane filters feature a wide center channel design, and can handle high concentrations of suspended solids with ease, allowing the passage of even large solids without plugging your ...

    By SpinTek Filtration, Inc. based in Los Alamitos, CALIFORNIA (USA). from Membrane Filteration Products Product line

  • DynaPerm

    DynaPerm is a system for enhanced filtration of particles from liquids. Laboratory experiments have produced flux rate increases of a factor of 50 over conventional cross- flow filtration with comparable or improved effluent quality. The initial efforts to develop the technology were funded by Small Business Innovation Research (SBIR) awards from ...

    By Dynaflow, Inc. based in Jessup, MARYLAND (USA).

  • Model SS-400-FSD & SS-450-FSD - Dual Arm Fume Extractor

    The Model 400 and 450 Floor Sentry Double provides source-capture fume extraction to two operators simultaneously. These energy-efficient systems are equipped with two flame-retardant, self-supportive flex arms that provide equal suction at both inlets. The Model 400 provides up to 700 CFM and the Model 450 is capable of 950 CFM.

    By Sentry Air Systems, Inc. based in Cypress, TEXAS (USA). from Portable Fume Extractors Product line

  • SpinTek - Model ST-II - Rotary Membrane System

    A next generation rotary membrane system is now available from SpinTek Systems for filtration and fractionation of high fouling and viscous feed solutions. The patented rotary membrane device provides a high shear force to prevent membrane fouling with a wide variety of feed solutions containing moderate to high solids levels. The ST-II is ...

    By SpinTek Filtration, Inc. based in Los Alamitos, CALIFORNIA (USA). from Membrane Filteration Products Product line

  • a1-Safetech - Model ST1 - Stainless Steel Weighing Enclosures

    The stainless steel safety weighing cabins were designed specifically for the pharmaceutical industry. These correspond with the stringent cleaning requirements in this area, especially when working with changing products where cross contamination must be absolutely avoided.

    By a1-safetech based in Dusseldorf, GERMANY. from Safe Weighing Enclosures Product line

  • Erlab - Filtered Storage Cabinets

    CaptairStore filtered storage cabinets are an ideal solution for any laboratory where many flasks and bottles containing toxic or noxious chemicals pollute the lab air and take up valuable bench space.

    By Erlab, Inc. based in Rowley, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you