Only show results available in Connecticut? Ok

landfill gas pumping equipment

  • Gas Booster Sets

    Our landfill gas fuel skids are specifically designed and manufactured for landfill gas pumping applications to ensure long-term reliability in processing landfill gas. We use tried and tested technology to ensure maximum uptime and therefore maximum revenue generation from the landfill gas.

    By Automatic Flare Systems Limited (AFS) based in Coventry, UNITED KINGDOM. from Flare systems Product line

  • Model SRX LP - Landfill Leachate Pump

     Landfill Pumps for Leachate Pumping and Gas Condensate Pumping in Landfills. The SRX LP is an air-powered pump used to extract leachate or gas condensate at variable rates equal to the well recharge rate. Pump flow rates are up to 35 l/min and operating temperatures up to 120 °C.

    By Cornelsen Umwelttechnologie GmbH based in Essen, GERMANY. from Landfill Leachate Pumps Product line

  • Pump Pull E - Pump Extractor

    Pull pumps faster from landfill and remediation wells to reduce downtime and increase productivity while protecting field personnel from injury. Removing pumps from landfill gas, leachate or groundwater remediation wells for cleaning or maintenance can be time-consuming, awkward and physically demanding. QED’s Pump Pull E™ Pump ...

    By QED Environmental Systems, Inc based in Dexter, MICHIGAN (USA). from Groundwater Remediation Pumping Product line

  • Model 2100 Series LCRS - Quick Seal

    Pump removal and replacement has historically been difficult or cumbersome on landfill LCRS Systems. The REP solution for this problem is our LCRS Quick Seal Series 2100.

    By Real Environmental Products based in Jackson, CALIFORNIA (USA). from Landfill Gas Products Product line

  • Easy Bolt - Conventional Nuts and Bolt Sets

    The Easy Bolt provides the function of conventional nuts and bolt sets, but uses a simple lever action instead of wrenches. The Easy Bolt fits through the flange bolt holes and is tightened by simply pushing the cam lever down. Easy Bolts are constructed of high quality stainless steels, with an investment cast lever.

    By QED Environmental Systems, Inc based in Dexter, MICHIGAN (USA). from Landfill Products Product line

  • Jeneer - Model XR-56C - Communication Modules Landfill Pump

    The XR-56C is an upgraded system that incorporates the ability to remotely collect pump data using your smart phone, tablet or computer. One of the biggest challenges for most landfill sites is to properly maintain their pumping system providing optimum gas recovery. The ability to know when pumps are properly functioning and collecting pump data ...

    By Jeneer Group based in Atlanta, GEORGIA (US) (USA).

  • EPG - Pneumatic Pumps

    EPG offers a complete line of pneumatic pumps under the Viridian America brand. They are suitable for numerous vertical pumping applications.  The rugged design is ideal for pumping highly corrosive leachate at elevated temperatures. The VP2 (2' model), while perfectly suitable for pumping harsh landfill leachate and gas condensate, is even ...

    By EPG Companies Inc. based in Maple Grove, MINNESOTA (USA). from Pumps Product line

  • Easy Fitting - Quick-Release Connectors

    The Easy Fitting Quick-release Connectors is a new type of lower-cost, quick fitting for the AutoPump (Patent Pending), designed for severe duty downwell conditions at landfills and remediation sites. The Easy Fitting allows the AutoPump to be quickly disconnected from its tubing and hose sets, eliminating the need to cut the tubing. Constructed ...

    By QED Environmental Systems, Inc based in Dexter, MICHIGAN (USA). from Landfill Products Product line

  • Landfill Gas Collection Systems

    Anaerobic decomposition of organic solid waste in the landfill site produces landfill gas (LFG). LFG mainly consists of methane and carbon dioxide, both of which are odorless. Trace constituents of other volatiles, often malodorous or toxic gases, are also found in LFG. LFG can migrate through soil into structures located on or near landfills. ...

    By Automatic Flare Systems Limited (AFS) based in Coventry, UNITED KINGDOM. from Leachate Extraction and Treatment Solutions Product line

  • Lectrodryer - Generator Auxiliaries

    Lectrodryer’s Generator Auxiliaries unite the all the auxiliaries associated with conditioning, monitoring, and handling of the gases used in a Hydrogen-Cooled Generator. Its flexible modular design can include any combination of components specially designed to meet your specific hydrogen-cooled generator maintenance needs. The Lectrodryer ...

    By Lectrodryer based in Richmond, KENTUCKY (USA). from Hydrogen Cooled Generator Auxiliaries Product line

  • Anchor - Model 101 - Electric Piston Pump

    The Anchor Electric 101 piston pump is powered by electricity. The control motor is located at surface grade for easy installation and maintenance. Above-well drive motor provides linear reciprocating pump action from grade through the sucker-rod assembly. The reciprocating pump removes water and product (e.g., oil, solvents, leachate) from a ...

    By Blackhawk Technology Company based in Glen Ellyn, ILLINOIS (USA). from Electric Pumps Product line

  • Anchor - Model 102 - Reciprocating Piston Electric Pump

    The Anchor Electric 102 reciprocating piston pump is powered by electricity. The control motor is located at surface grade for easy installation and maintenance. Above-well drive motor provides linear pumping action from grade through the sucker-rod assembly. This positive-displacement pump removes water and product (e.g., oil, solvents, leachate) ...

    By Blackhawk Technology Company based in Glen Ellyn, ILLINOIS (USA). from Electric Pumps Product line

  • Jeneer - Model XR-56 - Landfill Pump

    XR-56 Landfill Pump - Technology driven - Intelligent landfill pump solution for leachate or gas condensate applications. The XR-56 combines the simplicity of an air lift pump with industrial grade circuitry to provide a dependable, compact - light weight - low maintenance - high performance pump solution.

    By Jeneer Group based in Atlanta, GEORGIA (US) (USA).

  • Apollo Solar - Model 101 - Well Drive Motor Reciprocating Piston Pump

    The Apollo 101 is a linear-rod reciprocating piston pump powered by solar panels. The highly efficient 3/8 hp driver is mounted at surface grade above the wellhead for simple installation and maintenance. The positive displacement pump removes product (i.e. leachate, hydrocarbons) from a two-inch (4.85 cm) diameter well casing or greater, at ...

    By Blackhawk Technology Company based in Glen Ellyn, ILLINOIS (USA). from Solar Pumps Product line

  • Apollo Solar - Model 102 - Well Drive Motor with Solar Positive Displacement Piston Pump

    The Apollo 102 is a linear-rod positive-displacement piston pump powered by solar panels. The highly efficient 3/8 hp driver is mounted at surface grade above the wellhead for simple installation and maintenance. The reciprocating pump removes product (i.e. leachate, hydrocarbons) from a three-inch (7.62 cm) diameter well casing or greater, at ...

    By Blackhawk Technology Company based in Glen Ellyn, ILLINOIS (USA). from Solar Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you