Landfill Site Equipment In Texas
-
based in AUSTRALIA
Airwell pumping systems are used extensively in leachate recovery both in Australia and overseas. Uses include the detection and recovery from leaks in residue ponds, tailings dams and landfill sites. We have experience in developing systems for both hazardous and non-hazardous environments. The low flow capabilities of the Airwell system as ...
-
Manufactured by Advanced Geosciences, Inc.based in USA
The SuperSting Monitoring System is an add-on module to the SuperSting Wi-Fi, our multi-channel electrical imaging system. It monitors landfills, well sites, dams, and other unattended locations where changes of resistivity conditions over time must be recorded and ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The Easy Fitting Quick-release Connectors is a new type of lower-cost, quick fitting for the AutoPump (Patent Pending), designed for severe duty downwell conditions at landfills and remediation sites. The Easy Fitting allows the AutoPump to be quickly disconnected from its tubing and hose sets, eliminating the need to cut the tubing. ...
-
Manufactured by QED Environmental Systemsbased in USA
Retriever is a solar-powered, wireless data collection solution for landfill, remediation, and other sites. The Retriever is not just hardware, but an entire data delivery and reporting system that delivers dependable reporting of well level and pump flow data, clearly charted and displayed, and securely ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Retriever is a solar-powered, wireless data collection solution for landfill, remediation, and other sites. The Retriever is not just hardware, but an entire data delivery and reporting system that delivers dependable reporting of well level and pump flow data, clearly charted and displayed, and securely archived. ...
-
Manufactured by QED Environmental Systemsbased in USA
The Easy Bolt clamping force far exceeds the requirements for sealing 6" and 8" landfill gas well flanges. In most cases, no more than four bolts are needed to provide the required force in these ...
-
Manufactured by QED Environmental Systems, Incbased in USA
with a similar viscosity. The AP4+ High Viscosity AutoPump is complemented by the most comprehensive selection of accessories to provide a complete system to meet site-specific requirements. Call QED for prompt, no-obligation assistance on your pumping project ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Down well or above ground, QED opens up new possibilities by adding a new high-temperature polymer tubing to the lineup of Nitrile hose and jacketed nylon tubing sets for airpowered pumps. With a maximum working temperature of 250° F (121° C) at 100 PSI, Red-Line Tubing will be a problemsolver at your most challenging job sites. ...
-
Manufactured by QED Environmental Systemsbased in USA
Unique bullet shape HDPE shroud provides a low coefficient of friction and allows the pump to slide easily over internal pipe obstacles. Electric Torpedo pumps are available in three casing sizes to fit your requirements. Pump shroud is constructed of High-Density Polyethylene (HDPE) for superior strength and durability (lifetime warranty on shroud). Teflon-fitted stainless steel pump end and ...
-
Manufactured by QED Environmental Systemsbased in USA
The AutoPump Ultra Xtreme combines exclusive technologies to create a self cleaning design which keeps your pumps in the ground longer. Non-stick surfaces and internal agitation inhibit sludge buildup, extending service intervals and keeping clean-up to a minimum. Available in 4 and 4.5 inch sizes to match pumping ...
-
Manufactured by QED Environmental Systemsbased in USA
The AutoPump AP4+ Aggressive Fluids Model features upgraded materials for many parts to further extend the service life of the pump and to broaden the range of conditions each model can be used ...
-
Manufactured by Ecolo Odor Control Technologiesbased in CANADA
The Ecolo AMC System, combined with our effective odor specific AirSolution, is the most effective method for eliminating odors in a broad range of industrial and environmental applications. The all new AMC system is part of the AirStreme line of products by Ecolo. All components are securely enclosed in a NEMA rated fan cooled cabinet and features an advanced digital controller for ...
-
Manufactured by Advanced Geosciences, Inc.based in USA
A Switch Box with a grid of sealed connectors for custom electrodes. The all new Switch Box Grid is used to connect electrodes using wires terminated with banana plugs. The Switch Box Grid is available for the SuperSting WiFi and the SuperSting R8 models, it is not compatible with the SuperSting R1 ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AP2 Bottom Inlet Short and the AP2 Top Inlet Short AutoPumps both provide maximum capabilities and flow in a pump for 2“ (50 mm) diameter ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AP4+ Top Inlet Short, AP4+ Low Drawdown Top Inlet, AP4+ Bottom Inlet Short and AP4+ Low Drawdown Bottom Inlet AutoPump provide maximum capabilities and flow in a pump for 4” (100mm) diameter and larger wells and the need for an elevated inlet, such as pumping total fluids from wells contaminated with ...
-
by BCCKbased in USA
BCCK’s patented technologies play a vital role in high BTU landfill gas, digester biogas and renewable natural gas projects, contributing toward global efforts to reduce greenhouse gas emissions. BCCK’s specialized technologies are applicable to the treating and conditioning of renewable natural gas containing undesirable ...
-
Manufactured by Orbitalbased in UNITED KINGDOM
our decades of experience to design and manufactures bespoke CEMS systems for a variety of sites. Getting the design correct and specific to each site's requirements is of utmost importance to provide an analysis system which is reliable, reduces the problems stated above, meets MCERTS standards and has excellent longevity and ...
-
Manufactured by QED Environmental Systems, Incbased in USA
) remediation, landfill leachate and methane condensate pumping, solvent (dissolved phase and DNAPL) cleanup, suspended solids, silts, corrosives, and high viscosities, along with high temperatures and frequent starts and stops. ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AP3 Top Inlet, Short AutoPump is designed for applications requiring an elevated inlet, such as pumping total fluids from wells contaminated with ...
-
Manufactured by Macpresse Europa S.R.Lbased in ITALY
Ideal to shred waste paper, the MAC 2000 model is fitted with a single fast rotor and fixed hammers for high hourly output and easily shreds material in thick and bulky packs such as bundled newspapers. To get a balanced output between baler and shredder we recommend coupling this model with the MAC 110/1 – 111/1 – 111AS /1 – 112XL ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you