We couldn't find any leak sealing equipment suppliers or service providers located in Grenada

Here is a list of equipment results with suppliers serving Grenada

leak sealing equipment available in Grenada

  • Paratech - Leak Sealing Kits

    Paratech's Leak Sealing Kits provide a variety of Leak Sealing Bags, Velcro straps, ratchet belts, hoses and controllers. These Kits can be further accessorized with the Manual Foot Pump, working air cylinders and leak sealing plugs. Paratech's chemical resistant reinforced neoprene air bags help seal up liquid leaks on pipes, tankers and railroad ...

    By Paratech Inc. based in Frankfort, ILLINOIS (USA). from Leak Sealing Kits Product line

  • Paratech - Leak Sealing Control System

    Paratech Leak Sealing Systems are supported by a full line of high quality and high strength control equipment. All of Paratech's equipment is manufactured by Paratech at our factory in Frankfort Illinois, including all of Paratech's air supply control equipment.

    By Paratech Inc. based in Frankfort, ILLINOIS (USA). from Leak Sealing Control System Product line

  • Premium

    Sauereisen InstaPlug - Model No. F-180 - Hydraulic Water Plug for Sealing Active Water Leaks

    Sauereisen InstaPlug F-180 is a rapid setting, hydraulic water plug for sealing active water leaks, filling small voids and special anchoring applications. Typical industry applications are: eliminating water leakage in below grade concrete and masonry structures, manhole rehabilitation, and patches in new precast concrete sections and mortar ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Hydraulic Water Plug for Sealing Active Water Leaks Product line

  • Premium

    Merlin Microseal - Model 24816-U - System Replacement Septum

    1 General Purpose (3-100 psi) septum. The Merlin Microseal System is a septum-less system that provides very long life. Because there is not a septum to pierce, septum fragments will not be formed and deposited in the inlet liner. The septum contains a series of seals (wiper rib, o-rings, and a duckbill valve) that allow a needle to enter while ...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY. from System Replacement Septum Product line

  • Premium

    Merlin Microseal - Model 24815-U - Septum-Less System

    The Merlin Microseal System is a septum-less system that provides very long life. Because there is not a septum to pierce, septum fragments will not be formed and deposited in the inlet liner. The septum contains a series of seals (wiper rib, o-rings, and a duckbill valve) that allow a needle to enter while maintaining a leak-free seal. The septum ...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY. from Septum-Less System Product line

  • Premium

    Merlin Microseal - Model 24814-U - Septum-Less System

    The Merlin Microseal System is a septum-less system that provides very long life. Because there is not a septum to pierce, septum fragments will not be formed and deposited in the inlet liner. The septum contains a series of seals (wiper rib, o-rings, and a duckbill valve) that allow a needle to enter while maintaining a leak-free seal. The septum ...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY. from Septum-Less System Product line

  • Water Tank Liners

    Fab-Seal offers NSF /Ansi Standard 60 or 61 approved flexible membrane liner systems for tanks, clear wells, water vaults, chlorine, aluminum sulfate, and waste water tanks.

    By Fab-Seal Industrial Liners Inc based in Shawnee, OKLAHOMA (USA).

  • Premium

    Tedlar - Model 24634 - Gas Sampling Bag

    Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the most ...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY. from Gas Sampling Bag Product line

  • Amex Mono Seal - Ideal for rehabilitating pipe joints and leaks.

    Ideally suited for sealing pipe connections and leaks in all common types of pipes , including pipes constructed of steel, cast-iron, steel-concrete, in-situ concrete, PVC, AZ, GRP, clay, PP, as well as PE, for pipes with diameters from DN60 to DN6000.

    By Amex Sanivar based in Nöbdenitz, GERMANY.

  • Premium

    Addfield - Model GM-750 - Medical Incinerator (750Kg)

    The GM750 is Robust, Reliable and Efficient healthcare waste incinerator it has a 750kg load capacity. The GM750 with its top loading design ensures a sealed leak proof loading chamber, suitable for a wide variety of clinical waste types.

    By Addfield Environmental Systems Ltd. based in Burntwood, UNITED KINGDOM. from Medical Incinerator (750Kg) Product line

  • Premium

    Tedlar - Model 24633 - Gas Sampling Bag

    Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the most ...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY. from Gas Sampling Bag Product line

  • Premium

    Tedlar - Model 24655 - Gas Sampling Bag

    General description Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and virtually ...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY. from Gas Sampling Bag Product line

  • Premium

    Tedlar - Model 24654 - Gas Sampling Bag

    Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under ...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY. from Gas Sampling Bag Product line

  • Premium

    MultiMetall - Model UW - Two-Component Repair System

    MultiMetall UW is a two-component repair sysytem certified for repairs on wet or submerged metal. It can be combined with Hardener UW3 for the first coating when basic leaks need to be sealed, and with Hardener UW9 at hard-to-access repair sites. With an extremely short curing time, it patches the leak and gets you back to production sooner. ...

    By InduMar Products, Inc. based in Houston, TEXAS (USA). from Two-Component Repair System Product line

  • Oetiker - Model 210 - Quick Connector Aluminum

    Ruggedly constructed from 6061-T6 Aluminum: inherent corrosion resistance. Optional washer: component reduction for in-tank coolers. One piece machined body: compact space and lightweight. Designed for maximum performance: 100% production leak tested. Improved ergonomics and cleanliness: with rounded corners. Controlled axial clearance: prevents ...

    By Oetiker Schweiz AG based in Horgen, SWITZERLAND. from Quick Connector Aluminum Product line

  • Premium

    Raschig - Dual Flow Trays

    Dual flow trays are essentially sieve trays without down comers such that the entire tray active area is perforated with holes. Hole sizes range between 12.5 to 25 mm in diameter. Tray action occurs through the continuous counter current passage of vapour and liquid through the tray holes. As the liquid and vapour load are increased, the tray ...

    By Raschig USA Inc. based in Arlington, TEXAS (USA). from Dual Flow Trays Product line

  • Flexible Membrane Liners

    Fab-Seal is a custom manufacturer and fabricator of flexible membrane liners for internal and external containment. Fab-Seal offers custom fabrication, quick service and superior dependability. With 25 years of experience and compatibility studies, we can recomend a formulation and thickness to best suit your needs

    By Fab-Seal Industrial Liners Inc based in Shawnee, OKLAHOMA (USA).

  • Oetiker - Model 201 - Quick Connector Steel

    ZnNi coated steel: increased corrosion resistance. High strength material: for high tensile and torque forces. One piece machined body: compact space and lightweight. Controlled axial clearance: prevents micro leakage. Minimum pressure drop: ensures optimum flow. Robust retainer mechanism: low insertion force. External ISO seal: leak prevention at ...

    By Oetiker Schweiz AG based in Horgen, SWITZERLAND. from Quick Connector Steel Product line

  • Vacuum Leak Detection

    The VLD3 is our newest model in our vacuum leak detector series. Our vacuum leak detector is a quick and accurate test instrument used to find leaky tubes in heat exchangers, chillers, boilers, condensers, pipes, and all other tubular apparatus’.   This simple yet effective test instrument is currently used by manufacturers, ...

    By John R. Robinson Inc based in Long Island City, NEW YORK (USA). from Vacuum Leak Detection Product line

  • X-Seal - Model 6 - Leak Sealant

    Contains Six 300ml X-Seal tubes and 6 six inch injection nozzles.

    By SealGuard Inc. based in Gibsonia, PENNSYLVANIA (USA). from Leak Sealant Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you