Leak Sealing Equipment Near Nicaragua
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments offers a complete line of glassware for isokinetic sampling. Our Basic Glassware Set features extra heavy borosilicate glass with unground #28 Ball and Socket Joints with O-Ring Seals. Cost-effective unground joints are more durable than ground joints and the O-rings provide a tight, leak-free seal without grease. This ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The First Capped Barb Fitting with a Seal-tight Cover. Easy Port (Patent Pending) Capped Barb Fittings from QED resolve many of the issues that traditional barbs have, such as metal barbs that can be sharp and cut through the barb cover and tubing, brass fittings that corrode when exposed to H2S gas, and plastic barbs, which can break or snap ...
-
PremiumManufactured by Absolute Ozone®based in CANADA
Hy-Lok tube fittings are available in a variety of configurations and sizes that fulfill the need for leak-free gas and fluid containment, ideal for your ozone ...
-
Manufactured by Watson-Marlow Fluid Technology Groupbased in UNITED KINGDOM
Flows to 108,000 litre/hour, 16 bar. Double pump uptime in tough fluid handling duties. Suction lift to 30 feet, dry running and reversible. Eliminate ancillary ...
-
Manufactured by Hiden Analytical Ltd.based in UNITED KINGDOM
A unique dedicated system for leak analysis of sealed packages. The Hiden LAS system is designed to analyze the leak rate from sealed packages, from a quality control or research and development perspective. A variety of fill gases and impurities can be analyzed. The automated system provides a pass/fail analysis based on the ...
-
Manufactured by Franklin Electric Co., Inc.based in USA
Heavy-duty cast iron case and bronze impeller ensure optimum durability. Thermoplastic diffuser is molded for efficiency and dependability. Screw-in injector for easy conversion from shallow to deep well installation. Shaft coupling designed for easy removal of pump motor. Mechanical shaft seal ensures leak-proof fit and continuous ...
-
Manufactured by Philadelphia Mixing Solutions, Ltdbased in USA
PMSL’s expertise in reliability and efficiency, with a belt drive. Goodyear Eagle PD belt transmission - herringbone belt drive provides positive engagement for maximum efficiency, Lubricated for life deep groove ball bearings - long life, no maintenance, PMSL positive shutoff - no leaks, easy seal maintenance, Multiple seal ...
-
Manufactured by AMETEK MOCONbased in USA
Fully automated non-destructive leak detector - seal integrity of all your modified atmosphere packages is ...
-
Manufactured by POWERSYNC Energy Solutions, LLC.based in USA
Design Features Include: Partial State of Charge (PSOC), Up to 7X More Cycle Life than Standard AGM, Design Life of 12+ Years, Integrates with any 12V, 24V, 36V or 48V Inverters, Sealed, Compact, Leak Proof Design, Easy Installation with Front Terminal Access, Flexible Battery Orientation, 8 Year Limited Warranty ...
-
Manufactured by POWERSYNC Energy Solutions, LLC.based in USA
Design Features Include: Extremely Long Float Life Performance, Excellent Deep Cycling Performance, ?nti-Corrosion Grid Technology, Sealed, Compact, Leak Proof Design, Easy Installation with Front Terminal Access, Flexible Battery Orientation, Integrates with any 12V, 24V, 36V or 48V Inverters, 3 Year Limited Warranty ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
A portable, easy to use, thick black aerosol coating that seals water leaks and fills cracks and voids on most roofing surfaces. It is an extremely durable sealer and coating that will not sag or drip in summer heat or crack or peel in winter cold. It sprays as a liquid, flows into low spots, cracks and crevices then dries to a thick, ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
A portable, easy to use, thick black aerosol coating that seals water leaks and fills cracks and voids on most roofing surfaces. It is an extremely durable sealer and coating that will not sag or drip in summer heat or crack or peel in winter cold. It sprays as a liquid, flows into low spots, cracks and crevices then dries to a thick, ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
The strongest, most reliable leak-proof seal for your municipal water HDPE ...
-
Manufactured by Chemplex Industries, Inc.based in USA
1850: SpectroSulfur Analyzer Low Profile XRF Sample Cup, Single Open End; 1.69" (42.9mm) Dia X 0.77" (19.6mm) Height, 100/Pkg. The Chemplex designed “Snap-On Ring” and Cell “bead-to-indent” geometry is responsible for this Low Profile sample cup forming taut thin-film sample support planes and leak-resistant ...
-
Manufactured by Chemplex Industries, Inc.based in USA
for sample storage and future referral. The Cell neck and “Snap-On Ring” are uniquely designed with the Chemplex developed “bead-to-indent” geometry responsible for forming taut thin-film sample window planes and leak-resistant seals. The assembled sample cup with the cap attached, creates a series of internal physical ...
-
Manufactured by Fresno Valves & Castings, Inc.based in USA
The Series 3600 Swing Check Valves prevent backflow in irrigation water control ...
-
Manufactured by Walworthbased in MEXICO
Check valves are generally used to protect pumps or similar equipment, allowing the flow in only one direction and preventing flow reversal due to back pressure. The swing type check valves are designed to produce a low pressure drop in the pipeline. This design provides a tight seal as well as a fast reaction to the ...
-
Manufactured by Digital Control Corporation (DCC)based in USA
disable inputs. It is designed to work with up to five float switches. The controller has six optically isolated inputs for seal leak sensors and thermal overload switches available with most submersible pumps. The DFSC includes the following status indicators on front panel: high alarm light, high alarm horn, low alarm, pump status, seal ...
-
Manufactured by Digital Control Corporation (DCC)based in USA
disable inputs. It is designed to work with up to five float switches. The controller has six optically isolated inputs for seal leak sensors and thermal overload switches available with most submersible pumps. The TFSC includes the following status indicators on front panel: high alarm light, high alarm horn, pump status, seal failure, ...
-
Manufactured by Digital Control Corporation (DCC)based in USA
DCC is an Industrial Control Panel manufacturer certified to Underwriters Laboratories® (UL) 508A Standards (File No. E222066). Each custom control panel is custom built to specifications and thoroughly tested prior to shipment. DCC has built hundreds of custom control panels primarily designed for water and wastewater collection and distribution systems among other industrial ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you