Leak Testing Equipment Available In East Timor
-
ShowcaseManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The Concept ALTS was developed by Concept for the Royal Air Force to enable the fast and accurate leak testing of its wide-bodied aircraft. The ALTS produces a sub-micron, non-contaminating, artificial smoke (entrained in inert carrier gas) in the aircraft fuselage, utilising the aircraft’s own 115v 400-450 Hz supply. The unit will ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Unit for quick and precise leak testing of vacuum tight series components and helium ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Vacuum testing of smaller components (without gas handling): This model range with a chamber volume of approx. 50 - 500 l is the ideal solution for testing smaller components where gas handling can take place outside the test ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
For automated, localising leak testing of series components. Special features: Mobile or stationary measuring unit. Air as test medium with overpressure e. g. > 200 mbar. Linear or circular sensor guidance. Parallel operation of up to 32 ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Measuring device for load testing, leak tightness testing and serviceability testing in accordance with TRGI and for regulator inspection. The MiniLec 4 is a measuring device for load testing, leak tightness testing and serviceability testing in accordance with ...
-
Manufactured by Sciemetric Instruments ULCbased in CANADA
The Model 3670 Leak Test Station enables manufacturers to implement the innovative Sentinel 3520 leak test technology in a full turnkey solution. The 3670 can hold up to four Sentinel 3520 leak test modules, handling any of the leak test types supported by the ...
-
Manufactured by American Gas & Chemical Co. Ltdbased in USA
Colormetric detectors are rapid leak detectors and inexpensive to use. They react chemically with minute leaks causing a visible color change in the developer. They can be used to detect leaks up to 1x10-7 Std cm3/s. ...
-
Manufactured by Titan Engineering and Automation Limited (TEAL)based in INDIA
Leak testing plays a vital role in assembly and manufacturing process. It ensures the quality and reliability of the product there by avoiding field failures (non-destructive method). A leak is a flow of gas /liquid into or from a controlled volume in a product exceeding its allowable limits. Leak also requires a pressure ...
-
Manufactured by LeakMaster, Inc.based in USA
The Defender is LeakMaster’s latest Pressure Decay leak testing innovation specifically designed to reduce integration costs and improve repeatability. The Defender is ideal for a variety of pressure/vacuum decay leak testing applications. It’s compact design makes it ideal for applications with limited space. ...
-
Manufactured by Maximator VETEQ GmbHbased in GERMANY
The Maximator VETEQ leak test stands have a modular design so that the leak test stand always fits exactly to the requirements of our customers. We distinguish between fully automatic and semi-automatic test stands with either vacuum chambers or accumulation chambers. ...
-
Manufactured by Nolek ABbased in SWEDEN
, if there is a test case involving seal integrity and leaks then it is quite likely the S10 can handle it – with ...
-
Manufactured by ZELTWANGER Holding GmbHbased in GERMANY
The ZEDbase+ is an upgrade of the ZEDbase with a new selection of intelligent standard additional functions. This enables you to easily adapt the leak testing system to your individual testing requirements. The device can be set up and operated easily thanks to the intuitive user interface with many standard functions. ...
-
Manufactured by ZELTWANGER Holding GmbHbased in GERMANY
The further development of the MMS is the solution for complex leak and functional testing. The modular structure and the ZEDsatellite extension enable parallel testing on up to eight measuring circuits. ZEDmod offers the highest technical standards and completely new ...
-
Manufactured by Sunshine Scientific Equipmentsbased in INDIA
Leak Test Apparatus We are leading manufacturer of FULLY AUTOMATED LEAK TEST APPARATUS WITH IN BUILT PRINTER All the required details are enclosed in attachment. FEATURES: Fully micro controlled first time in India. Simultaneously display of time and volume on display module Start delay/Retention/Vacumm hold time can be set as ...
-
Manufactured by Nolek ABbased in SWEDEN
The leak test instrument PressurizeIT S9 Lite is used to perform leak testing on products that need to be air or liquid proof. Testing with over-pressure or vacuum is carried out quicker, easier, and less expensive than testing using the product’s working ...
-
Manufactured by Sciemetric Instruments ULCbased in CANADA
The Model 3675 Leak Test Station is a cost-effective turnkey station to deliver the speed and accuracy of Sciemetric leak testing for a wide range of applications. You can use up to three Sentinel 3520 leak test units controlled by a single sigPOD to conduct a range of leak ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
With atmospheric test chambers it is not necessary to evacuate air before the test process. Test chambers of this construction type can be manufactured at significantly lower cost with a significantly larger volume than vacuum chambers. We build these chambers with a chamber volume of up to 50 m³ as standard. This allows for reliable ...
-
Manufactured by American Gas & Chemical Co. Ltdbased in USA
, will not support bacteria growth and are formulated to prevent corrosion. Although their use is recommended with deionized or distilled water, they are chelated to be compatible with mildly hard water. Immersit additives are biodegradable. They meet the requirements of ASTM E515 Sec 8 on Immersion Leak ...
-
Manufactured by Fukuda Co., Ltdbased in JAPAN
This helium leak test system supports works of large sizes. Chamber size: Maximum diameter φ300 (□ 300) × ...
-
Manufactured by Cincinnati Test Systems (CTS)based in USA
The Sentinel Blackbelt Pro is our Next Generation of multi-test, multi-port, multi-channel test instrumentation. It manages and executes 4 part tests synchronous or asynchronous, at different stations, and all under the control of one Blackbelt Pro ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you