Liquid Level Monitoring Equipment
-
Manufactured by LP Sensor Technologybased in USA
The wireless liquid level monitoring terminal uses a pressure sensor to periodically collect the current liquid level height. When the liquid level height is higher or lower than the alarm threshold (configurable), the alarm will be triggered and sent to the management platform ...
-
Manufactured by UDM Systems, LLCbased in USA
ADU-E1 series dispensers, like the original ADU series, can be configured to support from 1 to 4 dicing saws. The ADU-E1 is wired into the dicing saws so that each pump runs independently as each saw requires lubricant. The ADU-E1 can also be connected via a MODBUS TCP/IP connection, giving process engineers the ability to observe and automate surfactant ...
-
Manufactured by ATS Grease Watchbased in USA
G3 TANK VISION is your Internet Based Tank Monitoring Service providing daily data that can be analyzed by Facility Manager(s). G3 Assists in the Following: Pump Scheduling, Pumper Evaluation, Tank Functionality, Plumbing Issues Related to Grease Trap, Emergency Service Notification, Reporting to City ...
-
Manufactured by Shanghai Rongde Mechanical and Electrical Equipment Co., Ltd.based in CHINA
Based on the principle of hydrostatic measurement, if there is continuous air entering the detector at the bottom of the cargo tank (commonly referred to as the sounding tube), when a small amount of air overflows from the discharge at the bottom of the cargo tank, a liquid is associated with The pressure at the level will be ...
-
Manufactured by Shanghai Rongde Mechanical and Electrical Equipment Co., Ltd.based in CHINA
The float type liquid level measuring device can be used not only for ballast water tanks, fuel oil tanks, draft meters, but also for measuring the liquid level of the cargo tanks, displaying temperature and steam pressure, and also issuing an alarm signal when the value exceeds the set limit. Display the condition of the cargo ...
-
Manufactured by Shanghai Rongde Mechanical and Electrical Equipment Co., Ltd.based in CHINA
This system is used for continuous level measurement. The signal of the pulse emitted by its sensor is collected by the receiving system after being reflected by the target. The distance of the target is determined by measuring the reflection running ...
-
Manufactured by Shanghai Rongde Mechanical and Electrical Equipment Co., Ltd.based in CHINA
The device can be used for liquid level measurement of fresh water, sea water, fuel oil tank, and four-point draught. In order to prevent the corrosion of seawater, the sensor material is corrosion-resistant, which extends the service life and reduces the maintenance. ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
The float switch is made for liquid level monitoring and is appropriate for direct pump control in all industrial ...
-
Manufactured by Arjay Engineeringbased in CANADA
Continuous level monitoring of liquids and bulk solids. This unique level system provides complete flexibility for monitoring one or more tanks in one complete package. The Level-Ease 4100 sensing probe monitors the capacitance field between the probe and it’s concentric ...
-
Manufactured by Arjay Engineeringbased in CANADA
Reliable monitoring of liquids and solids for a continuous level output. The probe continuously monitors product levels to provide a proportional level signal for pumps, alarms or control system interface. The 2880-LT sensing probe monitors the capacitance field around the active ...
-
Manufactured by Arjay Engineeringbased in CANADA
Reliable level monitoring of liquids and solids for measurement and control. The unit continuously monitors the liquid or solids level in a tank, stand-pipe or containment. Outputs include analog, digital, and relay control for interface to alarms, valves, pumps and other process ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Laboratory series combines the advantages of low liquid nitrogen consumption and medium storage capacity. It has the advantages of light weight, less space occupation and high efficiency storage of large sample freezing. It can meet the different needs of laboratory professionals. All models include freeze shelves and PC freeze boxes to ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
The VEGAMAG 81 magnetic indicator consists of a bypass, which is mounted as a communicating tube on the side of an existing vessel. The float used in the bypass with integrated permanent magnet system transmits the liquid level contactlessly to the magnetic display mounted on the outside of the bypass. Thus, the level of a vessel is ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
Application area: SOLITRAC 31 is ideal for use on cylindrical vessels, reactors, autoclaves, separators and mixing vessels. SOLITRAC offers extraordinarily high accuracy over the entire measuring range. The SOLITRAC 31 is a radiation-based sensor with PVT rod detector for continuous measurement of liquids and bulk solids. It is suitable for ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
Rod probe, partly PTFE insulated. Application area: For measurement of bulk solids and non-conductive liquids such as oil. A full/empty adjustment is necessary for setup. The VEGACAL 62 is a level sensor for continuous level measurement in all industries. The partly insulated probe is designed for measurement of bulk solids and can be also ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
With metallic measuring cell, for high pressures. Application area: For measurement of liquids and viscous products with high process pressure. The VEGABAR 83 is a pressure transmitter for pressure measurement of gases, vapours and liquids in all industries. The VEGABAR 83 offers special advantages in applications with high pressures. The ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
as the magnetic float. By using this unique design, the radar is able to track the metallic float top rather than the liquid ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
are level measurement in pressurized vessels as well as flow measurement in combination with effective pressure transmitters. Further applications are pressure monitoring on filters as well as density and interface ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
For standard measuring tasks, plastic housing IP66/IP67, Type 4X. Application area: 4 ... 20 mA/HART output, measuring range up to 15 m, accuracy ±2 mm, Ex approval. VEGAPULS 21 is the ideal sensor for non-contact level measurement of liquids and bulk solids in simple applications. It is particularly suitable for use in water ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
Rod probe, fully PE or PTFE insulated. Application area: For measurement in conductive and non-conductive liquids. A full/empty adjustment is necessary for setup. The VEGACAL 63 level sensor can be used universally for the measurement of conductive and non-conductive liquids. The rod electrode is fully insulated and the proven ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you