Liquid Waste Pump Equipment
-
Manufactured by Hydrovide SAbased in FRANCE
Equipement for the pumping and the transport of hazardous with flash point below 60°C. ADR ATEX EQUIPEMENT (LEVEL 1) Tank approval for the carriage of hazardous wastes of classes 3, 4-1, 5-1, 8-2, 8 and 9. Tank classification code L4AH + S4AH (ADR 2007 chapter 6-10). In conformity with tha ATEX directive 94/9. Possibility in the class ...
-
Manufactured by Hydrovide SAbased in FRANCE
Tank approval code L4AH + S4AH according to ADR 2007, chapter 6-10 refering to the carriage of hazardous wastes belonging to the classes 3,4-1, 5-1, 6-1, 6-2, 8 and 9.The tank approval is delivered by INERIS for the first standard unit according to the annex IX of the directive 94/9/CE, the following units being approved under ...
-
Manufactured by Westmoor Ltd.based in USA
Conde Right Angle PTO Drive. Complete Right Angle Drive system includes sturdy base, right angle gear box, direct drive coupling, mounted with the SDS pump of your choice. Easy bolt on installation to truck frame. Can accommodate either vacuum/pressure or vacuum only SDS pumps. Order both the right angle drive part no. below, and pump of ...
-
Manufactured by Westmoor Ltd.based in USA
Conde Right Angle PTO Drive. Complete Right Angle Drive system includes sturdy base, right angle gear box, direct drive coupling, mounted with the SDS pump of your choice. The Conde Hydraulic Drive Bracket is a CNC machined bracket that allows for perfect alignment of the pump and motor. Connect vacuum pump to hydraulic pump ...
-
Manufactured by Westmoor Ltd.based in USA
Condé Vacuum/Pressure pumps are ideal for the pumper who requires a pump capable of pressure off-loading. All Condé pumps are availble in either clockwise, counter-clockwise or double shaft rotations to match your precise needs. All models utilize the Condé Wick oiling system that requires no adjustment and ...
-
Manufactured by Aplisens S.A.based in POLAND
The SGE-25S and SGE-25C probes are applicable to measure levels of liquids containing contaminants or suspensions. Atypical use for this probe is the measurement of levels of liquid waste in intermediate pumping stations, fermentation chambers, setting tanks etc.Measuring range: min. 0.2 m W.C., max. 0.20 m W.C.Output signal: ...
-
Manufactured by Icon Process Controlsbased in USA
The FES Series Flow Switch is designed to detect liquid Flow or Low | No Flow. The FES switch encompasses a SPST contact that can be wired to energize a device when liquid flow either exceeds or drops below the set flow rate. The FES Series is an excellent choice for corrosive liquid services, water treatment, waste treatment, ...
-
Manufactured by Hoffland Environmental, Inc. (HEI)based in USA
The HEI Sludge Thickener is an efficient method to gravity concentrate and decant waste sludge. Liquid sludge pumped from a clarifier will have a solids content of 0.5% from cone bottom clarifiers to 2%-4% from the rake bottom clarifiers. The sludge thickener must have sufficient capacity to accumulate and thicken the sludge between filter ...
-
Manufactured by HOMA Pumpsbased in GERMANY
The installation of conventional sewer systems in areas of low population like small villages, farms or under difficult topographic conditions is often extremely expensive, mainly because of the high cost for large diameter pipework installation. HOMA provides the perfect, economical alternative with Barracuda grinder pump pressure sewage ...
-
Manufactured by Edson Pumps, Division of the Edson Corporationbased in USA
Edson Air Powered Diaphragm Pumps are ideal for collection and transfer of liquid waste, dewatering, slurry, and filter applications. An externally mounted reciprocating air cylinder powers the single diaphragm at low air consumption rates. Open flow-through flapper valves and accurate, variable speed ceramic solenoid control make these ...
-
Manufactured by Edson Pumps, Division of the Edson Corporationbased in USA
Edson Air Powered Diaphragm Pumps are ideal for collection and transfer of liquid waste, dewatering, slurry, and filter applications. An externally mounted reciprocating air cylinder powers the single diaphragm at low air consumption rates. Open flow-through flapper valves and accurate, variable speed ceramic 4-way valve make these ...
-
Manufactured by EDUR-Pumpenfabrik Eduard Redlien GmbH & Co. KGbased in GERMANY
Torque-flow pumps in compact bloc-design for the transport of liquids being contaminated with solids or suspensions. Typical liquids to be pumped are waste water, cooling agents contaminated with metal chips, abrasive oils and lyes, lime milk and also products that have to be transported with care. Main ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you