liquid waste stream Equipment available in Northwest Territories

Available in Northwest Territories| Near Northwest Territories
241 Results found

We couldn't find any liquid waste stream equipment in Northwest Territories

Here is a list of results available in Northwest Territories

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: liquid waste stream ×

  • Available in: Canada ×

  • Available in: Northwest Territories ×

AEREON - Peacock Liquid Burner

by AEREON     based in Austin, TEXAS (USA)

The Peacock Burner was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for well testing operations and have been used in applications in the Gulf of Mexico and Arabian Gulf. When only oil is flared, a high pressure air or gas source is required to provide mechanical ...

Thermophilic Digestion - Efficient Digestion of Organic Matter in Waste Streams

by Colsen International b.v.     based in HULST, NETHERLANDS

Application: Fermentation represents a natural and anaerobic dissimilation process during which organic biomass is transformed. Certain bacterial strains are capable of converting organic material mainly into methane (CH4), carbon dioxide (C02) and water. The efficiency of the conversion is determined by the system and the nature of the substrate. ...

QSense - Direct Contact Heat Exchanger System

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Efficiently recover valuable waste heat BTU’s from hot gases to heat water or other liquids the direct contact way with a QSense Heat Exchanger. An optimal solution to reduce energy consumption and save on expensive fuel costs, while at the same time cleaning the flue gas contaminants and reducing the exhaust temperature. This highly ...

Shand & Jurs Biogas - Model 97101 - High Pressure Manual Drip Trap

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs The Shand & Jurs Biogas 97101 High Pressure Manual Drip Trap provides for the continuous, safe removal of condensate from low points in pressure gas piping systems. Removing condensed liquid protects the piping and equipment from corrosion and 'water hammer' damage.

Shand & Jurs - Model 97110 - Automatic Drip Trap

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Biogas 97110 Automatic Drip Trap provides for the continuous, safe removal of condensate from low points in low pressure gas piping systems. Removing condensed liquid protects the piping and equipment from corrosion and 'water hammer' damage.

Remotox - Removal of Heavy Metals from Laboratory Waste Stream

by Graus Chemicals, LLC     based in Glendale, ARIZONA (USA)

Remotox removes arsenic, mercury, cadmium, lead, selenium, copper, zinc and other metals commonly found in laboratory wastes. Hexavalent chromium is easily removed and does not need to be reduced to its trivalent state. The resulting metal precipitate can be removed by filtration or by allowing the solids to settle and decanting the water. Remotox ...

VacuDry - Process and Design of Industrial Waste Treatment Systems

by econ industries GmbH     based in Starnberg, GERMANY

At the core of the econ VacuDry process is a specially designed dryer chamber which uses heat and controlled vacuum to evaporate volatile contaminants. The batch-wise working indirectly heated thermal desorption process treats solids contaminated with mercury, hydrocarbons, solvents and other hazardous substances at temperatures above their ...

Model PRRS - Waste Streams System

by PyroGenesis Canada Inc.     based in Montreal, QUEBEC (CANADA)

Proven out by the US Department of Defense (DoD), the game-changing PRRS harnesses the power of plasma to provide industry, municipalities and the defense sector with a comprehensive, all-encompassing solution to waste management, while producing much-needed clean energy to meet our growing needs. Our team of technology professionals have ...

Draygon - Model LSS - Liquid Solid Separator

by Draygon LLC     based in Venice, FLORIDA (USA)

The LSS system was first designed for thermal desalination to extract fresh water from salt water, however after countless hours of testing and redesign we have developed a system that can far exceed beyond what it was originally designed for. We have developed a system that is able to go anywhere in the world in tis own self-contained unit and ...

RUNI - Separating cartons and liquids creating two waste streams

by RUNI A/S     based in Tarm, DENMARK

100 % product destruction ensures that products are not resold or used internally. Save space and handling costs by compacting cartons early in the process. Save costs by separating into two waste streams – liquids and solids. Filling plants, dairies and other producers of drinks such as juice, yoghurt and other beverage cartons, destroy ...

CTP - Model TO - Direct Thermal Oxidation

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

For a safe removal of contaminated streams, e.g. halogenous waste gases and liquid waste, CTP has developed the direct thermal oxidation (TO).

Liquid Waste Solidifier

by Arcus Absorbents Inc.     based in Toronto, ONTARIO (CANADA)

LWS is a granular solidifying agent specifically developed to absorb water-based liquids. It is non-toxic, odorless and when wet, swells to form a tight gel that holds water molecules under pressure.

Dunphy - Simultaneous Firing Solutions for Waste Fuel Streams

by Dunphy Combustion Ltd     based in Rochdale, UNITED KINGDOM

Dunphy has developed a range of solutions for safe and efficient co-firing of fossil fuels, liquid bio fuels and gaseous fuels derived from recovered waste sources.

Verantis - Liquid Waste Incineration Systems

by Verantis Environmental Solutions Group     based in Middleburg Hts, OHIO (USA)

Effectively incinerate chemical and pharmaceutical liquid wastes. Verantis engineers all styles of liquid waste combustion systems for a broad range of industrial, chemical, and pharmaceutical hazardous waste applications. We will design your system in either a horizontal or vertical down fired configuration to meet your unique needs. Each liquid ...

Liquid Waste Disposal and Remediation Equipment


Our liquid waste disposal and remediation equipment solidifies and stabilizes a broad range of flowable waste streams. With a design capacity of 20m3/hr, our equipment handles a large output of liquid waste streams under extreme conditions. For some applications, mobile units may be accompanied by simple solid removal bins, completely eliminating ...

Rotary Drum Screen

by Munson Machinery Company, Inc.     based in Utica, NEW YORK (USA)

Munson Rotary Drum Screens utilize a cylindrical drum constructed of wedge wire screen to remove solid materials from waste streams at capacities from 200 to 4,650 gal/min. (757 to 17,600 liter/min.). Effluent discharges from a head box, overflows a dam and flows onto the outside of the rotating cylinder, allowing water to pass through the ...

RotaBed - Fluidized Bed Scrubber System

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

The patented RotaBed™ Fluidized Bed Scrubber represents a major breakthrough in ultra high efficiency gas absorption and particulate collection in a space saving non fouling design. RotaBed is the ideal technology for applications involving particulate laden gas streams or when handling high solids content or scale forming scrubbing liquids. ...

Terragon - Model STEP™ - For Integrated Solid and Liquid Waste Treatment

by Terragon Environmental Technologies Inc.     based in Montréal, QUEBEC (CANADA)

By combining MAGS and WETT, Terragon is creating STEP (System for Total Environmental Protection), the world's first fully integrated resource recovery system from waste. STEP enables any habitat to use all its waste streams, such as solid waste, used oils, sludge, oily water, and gray and black wastewater, to generate clean water and energy for ...

Combo - Liquid Reservoir Catering Waste Bin

by Glasdon International Limited     based in Blackpool, UNITED KINGDOM

Combo Liquid Reservoir Catering Waste Binis available in a wide variety of configurations, customised to meet your individual needs.

Dipper-Type Sampler

by Phipps & Bird, Inc.     based in Richmond, VIRGINIA (USA)

Automatically collects liquid samples from streams, flumes, lagoons, ponds or manholes. Performs reliably even under conditions of high levels of suspended solids or trash-laden flows: conditions where most pump-type samplers are ineffective. Easy to install; little maintenance required. Over 25 years of proven dependability in wastewater ...

Related Terms for liquid waste stream

Need help finding the right suppliers?

Let the XPRTs do the work for you