low flow pump equipment in Illinois

  • Aluminum `Low-Flow` Strainer

    Al-Mag castings - proven to be the toughest in the industry! Strainer will perform at maximum pumping capacity down to a water level of just 1.5' with no suction loss. Lightweight coupling with standard N.S. or I.P. threads. Surface turbulence will not affect this strainer. Optional 1.5' Water Transfer Device -available on sizes 4' to 6'. The ...

    By Fol-Da-Tank Company based in Milan, ILLINOIS (USA). from Aluminum `Low-Flow` Strainer Product line

  • Model R-VWP - Volume Flow Vacuum Pumps

    Contact-free operating two (R-WVB 25) or three (R-WVB 120 - 8,300) lobed rotary blower designed for use with vacuum operations to a maximum 0.5 bar (abs.). R-WVB (01): Base unit with bare shaft extension, no motor. R-WVB (30): Compact unit. R-WVB (70): Compact unit with an acoustic enclosure. Low noise level and low pulsation, high efficiency due ...

    By Elmo Rietschle by Gardner Denver, Inc. Office in Quincy, ILLINOIS (USA). from Volume Flow Vacuum Pumps Product line

  • Low Cost Grease Dispensing Pump

    Economical all-steel spring-loaded, hand operated pump comes with pail cover, follower plate, 9´ low pressure hose and continuous flow and booster control handle. Pump handle to fill booster valve. Squeeze trigger to dispense grease into fitting. Designed for light weight grease up to NLG #2.

    By BASCO, Inc based in University Park, ILLINOIS (USA).

  • Shurflo - Model 12 Vdc 2.3 Gpm - Revolution Pump

    SHURFLO®’s REVOLUTION™ fresh water pump design was created with a unique one-piece diaphragm and internal by-pass, assuring long life and top performance in all plumbing systems. Designed as the next legendary pump to exceed the expectations of our customers, the REVOLUTION™ Pump is built for high flow demand, low noise and ...

    By SHURflo - Pentair Office in Hanover Park, ILLINOIS (USA). from Revolution Pump Product line

  • Shurflo - Model 24 Vdc 3.0 Gpm - Revolution Pumps

    SHURFLO®’s REVOLUTION™ fresh water pump design was created with a unique one-piece diaphragm and internal by-pass, assuring long life and top performance in all plumbing systems. Designed as the next legendary pump to exceed the expectations of our customers, the REVOLUTION™ Pump is built for high flow demand, low noise and ...

    By SHURflo - Pentair Office in Hanover Park, ILLINOIS (USA). from Revolution Pumps Product line

  • Shurflo - Model 12 Vdc 3.0 Gpm - Revolution Pumps

    SHURFLO®’s REVOLUTION™ fresh water pump design was created with a unique one-piece diaphragm and internal by-pass, assuring long life and top performance in all plumbing systems. Designed as the next legendary pump to exceed the expectations of our customers, the REVOLUTION™ Pump is built for high flow demand, low noise and ...

    By SHURflo - Pentair Office in Hanover Park, ILLINOIS (USA). from Revolution Pumps Product line

  • Model Type KL-S - Self-Priming Pumps

    Excellent price/performance ratio. Low Life Cycle Costs. Large viscosity range. Good pumping performance even against high pressure (max. 6 or 12 bar). High operational reliability. Consistant diameters at joint connections for constant flow rates. Rigorous modular principle for high flexibility, low stocking of spare parts, short downtimes for ...

    By Wangen Office in Wood Dale, ILLINOIS (USA). from Self-Priming Pumps Product line

  • MTH Pumps - Model T31 Series - Regenerative Turbine Pumps

    The T31 Series close-coupled regenerative turbine pumps represent the most economical, high performance alternative for low flow (1/2 to 9 GPM) applications involving moderate to high pressures (heads to 400 feet). By combining the latest concepts in hydraulic turbine pump design with precision computer controlled manufacturing, the T31 Series ...

    By MTH Pumps based in Plano, ILLINOIS (USA). from Regenerative Turbine Pumps Product line

  • Pitbull - Model S3C & S3S - 3 Submersible Pumps

    The models S3C (steel) and S3S (316SS) are capable of pumping a wide variety of debris, solids and sludges, solvents and chemicals. Outfitted with CIPC full port check valves these 3' units can pump a full 3' diameter solid, and at low flows/high heads. This makes the model S3 a true 'trash-handling' pump in a small, cost effective package. The ...

    By Pitbull Industrial Pumps based in South Elgin, ILLINOIS (USA). from 3 Submersible Pumps Product line

  • Mouvex - Model Micro C - Eccentric Disc Pump

    Your solutions for continuous transfer and low-flow metering (?800 liters/h) 3 bars and 15 bars pressure.

    By Pump Solutions Group (PSG) based in Oakbrook , Terrace, ILLINOIS (USA). from Eccentric Disc Pump Product line

  • MTH Pumps - Model 140, 240, 180 and 280 Series - Regenerative Turbine Pumps

    140 , 240, 180 and 280 Series regenerative turbine pumps represent the most economical, high performance alternative for low flow (to 55 GPM) applications involving moderate to high pressures (heads to 700 feet). By combining years of regenerative turbine pump designs with precision computer controlled manufacturing, the 140 • 240 • 180 ...

    By MTH Pumps based in Plano, ILLINOIS (USA). from Regenerative Turbine Pumps Product line

  • Model Type KB-S GG - Self-Priming Pumps

    Low Life Cycle Costs. Excellent price/performance ratio. High pressure performance. Maintenance-friendly. Good price/performance ratio (standard product group). Optionally with base plate or mobile. Good dosing properties. Constant flow speed in the suction housing prevents desposits or sedimentation. Rigorous modular principle for high ...

    By Wangen Office in Wood Dale, ILLINOIS (USA). from Self-Priming Pumps Product line

  • MTH Pumps - Model E41 & T41 Series - Regenerative Turbine Pumps

    Close-coupled and pedestal mounted regenerative turbine pumps represent the most economical, high performance alternative for low flow (1/2 to 22 GPM) clean fluid applications involving moderate to high pressures (heads to 600 feet). By combining the latest concepts in hydraulic turbine pump design with precision computer controlled manufacturing, ...

    By MTH Pumps based in Plano, ILLINOIS (USA). from Regenerative Turbine Pumps Product line

  • Pitbull - Model S2C & S2S - 2 Submersible Pumps

    The models S2C (steel) and S2S (316SS) are outstanding, low flow sump pumps. They will operate reliably in difficult sump environments and feature the fully automatic, AP200 pneumatic control panel.  Solids capacity on these units is a full 2' diameter, which allows them to easily handle sump debris, whether stringy and fibrous or hard and ...

    By Pitbull Industrial Pumps based in South Elgin, ILLINOIS (USA). from 2 Submersible Pumps Product line

  • MTH Pumps - Model 150, 250, 160, 260, 170, 270 Series - Regenerative Turbine Pumps

    150, 250, 160, 260, 170, 270 Series regenerative turbine pumps represent the most economical, high performance alternative for low flow (to 150 GPM) applications involving moderate to high pressures (heads to 1150 feet). By combining years of regenerative turbine pump designs with precision computer controlled manufacturing, the 150 • 250 ...

    By MTH Pumps based in Plano, ILLINOIS (USA). from Regenerative Turbine Pumps Product line

  • MTH Pumps - Model M50 and L50 Series - Regenerative Turbine Pumps

    Vertical base mount and horizontal pedestal mounted multi-stage regenerative turbine pumps represent the most economical high performance alternative for low flow (2 to 38 GPM) applications involving moderate to high pressures (heads to 2300 feet). By combining the latest concepts in hydraulic turbine pump design with precision computer controlled ...

    By MTH Pumps based in Plano, ILLINOIS (USA). from Regenerative Turbine Pumps Product line

  • Shurflo - Model 115 VAC 3.0 Gpm - Revolution Fresh Water Pump

    SHURFLO®’s REVOLUTION™ fresh water pump design was created with a unique one-piece diaphragm and internal by-pass, assuring long life and top performance in all plumbing systems. Designed as the next legendary pump to exceed the expectations of our customers, the REVOLUTION™ Pump is constructed for high flow demand, low noise ...

    By SHURflo - Pentair Office in Hanover Park, ILLINOIS (USA). from Revolution Fresh Water Pump Product line

  • Justice - Model LJ4 Series - Open Hopper Progressive Cavity Pump

    The Justice LJ4 Series Open Hopper Progressive Cavity Pump represents an ideal pumping solution for viscous solutions with high solids contents such as high-viscosity chemical transfer of liquids and sludge's in industrial facilities and other low-flowable pumping mediums. Flow rates of 2.02 GPM per 100 Revolutions (5 GPM to 9 GPM) at up to 225 ...

    By Liberty Process Equipment, Inc. based in Arlington Heights, ILLINOIS (USA). from Open Hopper Progressive Cavity Pump Product line

  • EmLite DC Powered Sampling Pump

    The EmLite DC Powered Sampling Pump is a battery powered EmLite pump designed for IAQ sampling with low backpressure sampling devices such as spore traps at flow rates from 2-20 LPM.

    By EMLab P&K Office in Naperville, ILLINOIS (USA).

  • Liberty - Model LL2 Series - Polymer Feed and Chemical Injection Pump

    The LL2 PC Pump is an ideal low-flow Progressive Cavity Pump for polymer feed, chemical feed and sampling/dosing applications. The LL2 design has been in use in the chemical injection and wastewater polymer feed now for decades by offering precise, pulseless fluid injection control that only a PC Pump can provide polymer injection in wastewater ...

    By Liberty Process Equipment, Inc. based in Arlington Heights, ILLINOIS (USA). from Polymer Feed and Chemical Injection Pump Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you