low flow pump equipment in Minnesota

  • Triplex High Pressure Positive Displacement Piston And Plunger Pumps

    Cat Pumps offers an extensive line of industrial triplex high-pressure piston and plunger pumps. Our precision triplex design assures high energy-efficiency, a smooth low-pulsation flow and exceptionally long life.

    By Cat Pumps based in Minneapolis, MINNESOTA (USA).

  • Ultra-High-Pressure Wildland Foam Firefighting Units

    CAT PUMPS offers a variety of ultra-high-pressure, low flow, portable foam fire fighting units for effective control of wildland brush and grass fires. These ultra-high-pressure, foam fire fighting units are lightweight and extremely dependable. They conserve water and permit the fire fighters easy access to remote wildland fire fighting areas. ...

    By Cat Pumps based in Minneapolis, MINNESOTA (USA).

  • Triplex High-Pressure Pumps

    CAT PUMPS is a manufacturer of triplex high pressure pumps. The triplex design offers the most cost-effective design for achieving high efficiency and low pulsation. CAT PUMPS operate at 90% overall efficiency which helps reduce operating costs. Our triplex high-pressure pumps are both piston and plunger design and feature three synchronized ...

    By Cat Pumps based in Minneapolis, MINNESOTA (USA).

  • Graco - Model EP4 Series - Hose Pump

    Peristaltic Hose Pumps for Industrial Metering and Transfer. Maximum flow rate of 19.5 gpm (73.8 lpm). Ideal for abrasive material transfer applications. Graco’s EP4 Series Hose pump designs utilize a single oversized roller that compresses a low friction hose through a full 360 degrees of rotation. This innovative design means longer hose ...

    By Graco Inc. based in Minneapolis, MINNESOTA (USA). from Hose Pump Product line

  • Graco - Model EP2 Series - Hose Pump

    Peristaltic Hose Pumps for Industrial Metering and Transfer. Maximum flow rate of 0.8 gpm (3.02 lpm) at 50 rpm. Ideal for chemical metering applications. Graco’s EP2 Series Hose pump designs utilize a single oversized roller that compresses a low friction hose through a full 360 degrees of rotation. This innovative design means longer hose ...

    By Graco Inc. based in Minneapolis, MINNESOTA (USA). from Hose Pump Product line

  • Graco - Model EP3 Series - Hose Pump

    Peristaltic Hose Pumps for Industrial Metering and Transfer. Maximum flow rate of 2.4 gpm (9.08 lpm) at 50 rpm. Ideal for chemical metering and sanitary applications. Graco’s EP3 Series Hose pump designs utilize a single oversized roller that compresses a low friction hose through a full 360 degrees of rotation. This innovative design means ...

    By Graco Inc. based in Minneapolis, MINNESOTA (USA). from Hose Pump Product line

  • PumpWorks - Model PW2001 - High Flow, UL-Listed, Single Rate Liquid Pump

    The PW2001 has single rate capability for low-cost, simple on-off operation. For pumps with integral rate control capabilities, consult the PumpWorks, Inc. General Catalog for selection assistance within the full line of versatile dual solenoid pumps.

  • PLC - Model AirRaider Series - Low-Profile Air Strippers

    Product Level Control manufactures a variety of air sparge systems; custom-equipped for optimal on-site performance. By offering flexible system designs and a wide range of available product parts and accessories, we meet your individual project goals for the best possible value. We size and match model type according to your air flow and pressure ...

    By Product Level Control Inc. (PLC) based in Burnsville, MINNESOTA (USA). from Low-Profile Air Strippers Product line

  • Model CAR 90 / H - Alternating Volumetric Pumps

    Semi-hydraulic three-diaphragm pump, for use in low pressure systems. Parts in contact with pumped liquids in reinforced polypropylene and AISI 303/304. Diaphragms in NBR. Seals in NBR. Die-cast casing with oil-immersed mechanism and clear plastic tank for visual level checking. Remote oil tank installation kit available on request. Oil drainage ...

    By Annovi Reverberi S.p.A. Office in Fridley, MINNESOTA (USA). from Alternating Volumetric Pumps Product line

  • Model AR 45 LFP C - Semi-Hydraulic Three-Diaphragm Pump

    Semi-hydraulic three-diaphragm pump, for use with aggressive products in low pressure systems. Parts in contact with pumped liquids in reinforced polypropylene, Kynar and AISI 316 L. Diaphragms in BlueFlex™. Seals in Viton®. Three-diaphragm design for smoother operation and less hammer effect in the delivery circuit. Die-cast casing with ...

    By Annovi Reverberi S.p.A. Office in Fridley, MINNESOTA (USA). from Semi-Hydraulic Three-Diaphragm Pump Product line

  • Industrial Duty Submersible and End-Suction Centrifugal Pumps

    Cat Pumps offers a line of centrifugal pumps that complements our piston and plunger pump product line. These pumps offer solutions to high-flow, low-pressure pumping needs. The pump housings are made of bulge formed 304 stainless steel that is stronger, lighter, more durable and more cost-effective than conventional cast iron pumps. There are ...

    By Cat Pumps based in Minneapolis, MINNESOTA (USA). from Industrial Duty Submersible and End-Suction Centrifugal Pumps Product line

  • Coster - Wall Mount

    RO Elements: Extra Low Energy Thin Film, Pressure Vessels: 304 Stainless Steel (SS), Frame: 409 SS, Pump: Vane type, Pump Pressure Gauge (liquid filled), Low Pressure Cutoff Switch, Pre Filter: 1 Micron Sediment, Inlet Filter Gauge, Inlet Feed Electric Solenoid Valve, Inlet Manual Shutoff Valve, Product Reverse Flow Check Valve, Waste Recycle ...

    By Coster Engineering based in Mankato, MINNESOTA (USA). from Wall Mount Product line

  • WTR - Flexible Disc Check Valves

    Swing Flex Valves are designed for tough pumping applications with high discharge pressures in which reverse flows could cause excessive surging, severe slamming and water hammer. The valve is designed with a 45° angle valve seat and a short disc stroke of 35° to achieve rapid closure, and positive seating at high or low pressures. This ...

    By Water Technology Resources based in Bloomington, MINNESOTA (USA).

  • CPC Model 3771

    The Model 3771 CPC is a compact, rugged, and low-cost counter that detects airborne particles as small as 10 nm at an aerosol flow rate of 1.0 L/min. It measures particle concentrations in the range from 0 to 104 particles/cm3 in single particle count mode. It features an anti-spill design, water-removal capability, and USB and Ethernet ports. It ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from CPC Model 3771 Product line

  • Flowsorb - Low-Flow Water Treatment Applications

    Designed for low-flow water treatment applications, prefabricated 55-galIon FLOWSORB canisters contain all the operating elements found in a full-scale adsorption system. These small, economical treatment systems hold 180 pounds of granular activated carbon for applications including: Small wastewater streams. Groundwater remediation. Underground ...

    By Calgon Carbon Corporation Distributor in MINNESOTA (USA). from Low-Flow Water Treatment Applications Product line

  • Mixed Flow

    Mixed flow impellers are specifically used when fluid viscosity changes dramatically during a batch. The dual pumping action produces a flow pattern similar to low viscosity fluids.

    By Philadelphia Mixing Solutions, Ltd Distributor in MINNESOTA (USA). from Mixed Flow Product line

  • Axial and Mixed Flow Pumps

    Large volumes of water, moved continuously and fast. That’s what you get with Patterson Axial and Mixed Flow Pumps. This design delivers high capacity at low to medium heads with outstanding efficiency. These heavy-duty performers are widely used for flood control, irrigation and drainage projects, large scale primary water supplies, ...

    By Patterson Pump Company Distributor in MINNESOTA (USA).

  • VAF - Vertical Axial Flow Pump

    The VAF is a vertical high efficiency, axial flow impeller pump for applications that require large quantities of water with low head.

    By RUHRPUMPEN GmbH Distributor in Saint Paul,, MINNESOTA (USA). from VAF - Vertical Axial Flow Pump Product line

  • Low Solidity Axial Flow Hydrofoil Impellers (LSV)

    A simply constructed impeller, the LSV or low solidity hydrofoil delivers a high pumping capacity for fast blending or solid suspension in water-like or low viscosity systems. Hydrodynamically efficient, the LSV produces a higher degree of axial flow discharge compared to a conventional Pitch Blade Turbine (PBT). Ultimately, this allows the LSV to ...

  • Model 316 - Stainless Steel Axial-Flow Submersible Pump

    Carry's Stainless Steel Axial-Flow Submersible pumps are an economical solution for high-volume, low-head flow applications.  The Carry line offers single pumps with the capacity for 50 to 1,450 GPM at 2 to 25 feet of total dynamic head.  These pumps are also efficient and economical in parallel use for larger volumes.

    By Carry Manufacturing, Inc. Distributor in Sauk Centre, MINNESOTA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you