Only show results available in Michigan? Ok

low temperature sludge drying equipment

  • Model sludge dryer - Low Temperature Sludge Drying system for sewage treatment

    I. Overview on drying technologyThe injected low temperature air dry the sludge with a circle way. Through the sludge layer, the dried air(20% r.H) that is heated up to 50℃ generate wet air(30℃,99% r.H), which condensate and remove the water on the dryer, and then heat the air flow again on the condenser. The dried air moves circularly in the ...

    By SAFARI ONE contrasting based in Guangzhou, CHINA. from Sludge Dryer Product line

  • Dewatering & Drying Sludge Dryer

    1 kWh electricity alone is capable to remove as much as 4.2 kg of water from wet sludge, comparing to normal 1-2.5 kg water per kWh. Save energy bill and reduce carbon footprint. Reduce wet sludge volume by 67% and weight by 80%. Save transportation cost. Control processing temperature under 75ºC with outlet dried sludge temperature below ...

    By Guangzhou Shincci Energy Equipment Co., Ltd. based in Baiyun District, CHINA.

  • Drying Of Sludges

    The Harter devised Drymex® sludge drying technology is capable of drying aqueous sludges of any kind in an energy saving, closed system at low temperatures. Such drying decreases the weight and volume of your sludge so that your disposal cost is significantly reduced. Drymex® drying systems are used for previously dewatered sludges. On the ...

    By HARTER GmbH based in Stiefenhofen, GERMANY.

  • SmartDry - Belt Dryer

    TheSmartDry™ belt dryerutilizes the available waste heat efficiently for the drying of sewage sludge. The sewage sludge is fed into theSmart Dry™ belt dryerby a matrix-free feeding. The patent pending feeding system is 100 % secure of plugging and allows the loading/feeding of sludge with dry solids content range between 15 to 70 %. ...

    By Thermo-System Industrie- & Trocknungstechnik GmbH based in Filderstadt - Bernhausen, GERMANY. from Thermal Sewage Sludge Drying (Large Plants) Product line

  • EloDry - Low-Temperature Belt Dryer

    EloDry is a low-temperature belt dryer of the latest generation, in particular for drying sewage sludge. Due to the special design that is optimally adapted to the respective conditions, EloDry® drying systems provide reliable and highly energy-efficient, economical drying at low drying temperatures.

    By Eliquo Water Group GmbH based in Bad Homburg v.d.H., GERMANY.

  • STELA - Low Temperature Belt Dryer for Sewage Sludge

    The STELA low-temperature drying systems are developed to dry the most various sludges reliably, energy-saving and dust-free down to DS contents of approx. 65 % to 95 %. The sewage sludge mechanically dewatered to approx. 20 – 30 % DS content is extruded on a special extruder. The pellets fall directly onto a perforated conveyoer belt and ...

    By STELA Laxhuber GmbH based in Massing, GERMANY. from Low Temperature Belt Dryer Product line

  • Municipal Sewage Sludge

    Sewage sludge is a residue of the treatment of municipal wastewater. Sewage sludge can be disposed on landfills, incinerated and utilized as energy or it is used as an agricultural fertilizer.

    By EnviroMin Technologies based in Suedharz, GERMANY.

  • Mutao - Low Temperature Sludge Dryer

    Low temperature sludge dryer solution can reduce sludge moisture from 83% to 30%-10% as per specific requirement, with volume reduction by 67%, weight reduction by 80% and sterilization rate by 90%. It’s energy-efficient and eco-friendly, and has been extensively applied in municipal sludge and industrial sludge (e.g printing & dyeing, ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you