Machine Monitoring Equipment
-
Manufactured by Dynamic Ratings Incbased in USA
Motors and Generators are key assets in most utility and industrial applications. Studies from CIGRE and other sources depict that 27% of motor failures are caused by failures in the winding insulation system and that cable failures are 12% and cables fail at a rate of 12%. The RMM provides information as to the health of the stator winding insulation in medium and high voltage motors and ...
-
Manufactured by HOREICH UGbased in GAMBIA
Regular transmission of machine data and sensor readings. Compatible with CAN bus sensors and 4-20mA sensors. No wiring required, no power connection in battery version. Automatic warning by email if limit values are exceeded. Wireless data transmission with different radio standards (NB-IoT, CAT-M, GSM). Convenient monitoring of measured ...
-
Manufactured by Schenck Corporationbased in USA
With the programmable monitoring modules, the measurement values are continuously acquired from which the characteristic values processed, digitally displayed, compared to pre-set limit values and, if the case arises, alarms are issued ...
-
Distributed by StrainSensebased in UNITED KINGDOM
The KS90B, KS901B10 or KS901B100 are specifically designed as a Low Cost accelerometer for integration into machines and instruments. Using the latest Shear design, the Accelerometer is available as either Charge mode or IEPE output for dynamic ranges +/-5000, 500 or 60g. The sensor can be glued, clamped or tube mounted ...
-
Manufactured by Sigicom ABbased in SWEDEN
Advanced machine vibration monitor for on line monitoring of rotating machines. Continous analysis af many parameters such as vibration level, RPM, unbalance, bearing condition and much more. Ethernet communication with PLC and SCADA ...
-
Manufactured by Istec InternationalÂbased in NETHERLANDS
The SpeedSys T10 is a single-channel speed monitor and switch that delivers speed monitoring functions to rotating equipment. It converts the signals from speed sensors to processed outputs. Its small technical footprint allows for a low-impact installation, to enable speed monitoring to a wide range of applications. The T10 is ...
-
Manufactured by Istec InternationalÂbased in NETHERLANDS
The SpeedSys T20 is a dual-channel speed monitor and switch that delivers speed monitoring and protection functions to rotating equipment. It converts the signals from speed sensors to processed outputs. Its small technical footprint allows for a low-impact installation, to enable speed monitoring to a wide range of applications. The T20 is ...
-
Manufactured by Metra Mess- und Frequenztechnik in Radebeul e.K. (MMF)based in GERMANY
Condition monitoring of rotating and reciprocating machines to ISO 10816-1/-6 etc. Evaluation of roller bearing condition to VDI 3832 etc. (VM24 and VM25). Humanschwingung (VM31). Graphical trend display (VM2x). Frequency analysis (VM25/31). Non-contact rotation speed measurement with laser pointer (VM25). Infrared temperature sensor ...
-
Manufactured by Dynamic Ratings Incbased in USA
The DRPD-CAL is the industry’s most compact, rugged and portable calibration instrument used to generate Partial Discharge (PD) signals designed for use in demanding utility and industrial environments. DRPD-CAL is an accurate instrument used to calibrate systems and provide the utmost in user convenience. The DRPD-CAL generates multiple ranges of pulses which are conveniently spaced ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
utilizes a precision-machined orifice to measure flow rate. The DFM displays on-board calculations on a bright large character LED display. Flow rate and totalized volume corrected to a reference T and P and elapsed time are ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
). The DFM utilizes a precision-machined orifice to measure flowrate. The DFM displays on-board calculations on a bright large character LED display. Flowrate and totalized volume both corrected to a reference Temperature and Pressure and elapsed time are ...
-
PremiumManufactured by Videology Industrial-Grade Camerasbased in USA
The new SCAiLX-ZB offering Edge AI capabilities in a Videology Zoom Block camera brings integration of artificial intelligence algorithms and technologies into the camera. The introduction of neural-network inferencing to the Videology Zoom Block cameras makes SCAiLX-ZB a smart and powerful ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
). The DFM utilizes a precision-machined orifice to measure flowrate. The DFM displays on-board calculations on a bright large character LED display. Flowrate and totalized volume both corrected to a reference Temperature and Pressure and elapsed time are ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
Welcome to the steerable, zero-emissions, portable, battery-powered TROGLOTREK Sewer Crawler. This robot is one of the smallest options on the market, able to inspect straight 4" (100mm) pipes, and light enough for a single operator to pick it up, transfer it to a jobsite, run the inspection on battery power with no additional cables, generators, and carry it back. This crawler can be efficiently ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
(DFM). The DFM utilizes a precision-machined orifice to measure flow rate. The DFM displays on-board calculations on a bright large character LED display. Flow rate and totalized volume are both corrected to a reference T and P. Elapsed time, flow rate and volume are displayed at operator ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
). The DFM utilizes a precision-machined orifice to measure flow rate. The DFM displays on-board calculations on a bright large character LED display screen. Data download capability is available through the RS232 port on a real-time basis utilizing an optional F&J data storage device. ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The ERMS2000-M movable vehicle emission testing machine/VOC monitoring system, developed by our company, is suitable for mobile enforcement of city roads and stationary enforcement of single lane. Our VOC monitoring equipment can detect the CO, CO2, NO, HC and opaque smoke intensity in gasoline and diesel vehicle exhaust through TDLAS, ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
). The DFM utilizes a precision-machined orifice to measure flow rate. The DFM displays on-board calculations on a bright large character LED display screen and provides automatic flow control. Data download capability is available through the RS232 port on a real-time basis utilizing optional F&J data storage ...
-
PremiumManufactured by Challenge Technologybased in USA
A computer controlled, automated, concrete thermal expansion testing ...
-
PremiumManufactured by Creaform - AMETEK, Incbased in CANADA
Our highly accurate portable CMM, the HandyPROBE has been designed for shop-floor use to increase the realiability and speed of your 3D measurement processes. The HandyPROBE line-up is a portable optical CMM specifically designed for use on the shop floor. Thanks to its metrology-grade accuracy and dynamic referencing capabilities, the HandyPROBE delivers unmatched accuracy regardless of the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you