machine to machine system equipment in Michigan

  • TransCut Plasma Cutting

    In the past there have been a number of drawbacks associated with plasma cutting. Not least, conventional cutting processes suffer from limited mobility due to the fact that they require a supply of compressed air. The large proportion of nitrogen in the plasma jet, moreover, encouraged chemical reactions at the heated cutting surfaces and the ...

    By Fronius Office in Brighton, MI, MICHIGAN (USA).

  • DeltaSpot

    Resistance spot welding has established itself across a wide range of industries as a cost-effective method for joining steel sheets. In modern vehicle manufacturing in particular, high-strength steel sheets of varying strenghts and quality need to be joined. This type of work is too demanding for conventional spot welding. There is also a growing ...

    By Fronius Office in Brighton, MI, MICHIGAN (USA).

  • Premium

    Bright Technologies - Oil & Filter Recycler Base Machine

    Rugged, Reliable Operation Sebright Products/Bright Technologies have over 28 years’ experience manufacturing hydraulic equipment and over 20 years with liquids/solids separation technology. The OFR 4006 Oil & Filter Recycler is a product that exhibits our experience and continuous improvement in these technologies. The Oil & Filter ...

    By Sebright Products, Inc. based in Hopkins, MICHIGAN (USA). from Oil & Filter Recycler Base Machine Product line

  • Model CM 3500 - Attic And Wall Spray Insulation Machine

    CM-3500 system operates on jobsite power with no costly fuel and generator maintenance. Enhancing better quality, more production capacity and with sustainable recycling methods. If you want to expand your business in bigger scale with affordable wall spray system then CM-300 is the one you should consider. It is the smallest yet powerful machine ...

    By Insulation Machines based in Davison, MICHIGAN (USA). from Attic And Wall Spray Insulation Machine Product line

  • CNC Machine Tool Coolant Mist Collector

    The First Stage Centrifugal Separator uses Filtra-Systems patented 'At The Machine' technology. Centrifugal separation is used to remove oil mist from air. Droplets are then gravity-drained back into the machine tool, decreasing coolant losses (and reducing the cost of make-up coolant). Unlike other centrifugal oil mist collectors, there are no ...

    By Filtra Systems based in Farmington Hills, MICHIGAN (USA). from CNC Machine Tool Coolant Mist Collector Product line

  • Model HV-40 - Head Cutting Machines

    The HV-40 is a precision headcutting unit used to perform a highly accurate collarbone-off head cut. The HV-40 features a unique automated locating system  that utilizes the collarbone for precise  placement. This locating process allows for accurate head cuts, high levels of consistency and easy feeding.    

    By Pisces Fish Machinery Inc. based in Wells, MICHIGAN (USA). from Head Cutting Machines Product line

  • Telso Splice - Model TS6 - Wire Welding Machine

    The TelsoSplice TS6 is an advanced wire welding machine for large nodes. Thanks to its rugged construction it is possible to weld a wide range of cross sections, from 2.5 to 100 mm² *. The weld head and the associated control system are integrated into an ergonomic table. The TelsoSplice TS6 is programmed and operated via a touch-screen ...

    By Telsonic AG Office in Shelby Township, MICHIGAN (USA). from Wire Welding Machine Product line

  • EZ-Screen - Model 1200XL - Topsoil Screening Machine

    It’s simple math: whether working with topsoil, compost, or gravel, ordinary box screeners can’t work as hard as the EZ-Screen 1200XLS.  Unless they’re teamed up with two loaders. The reason is the 1200XLS’s built-in conveyor system. With a typical box screener, the loader operator has two jobs. Job one is keeping the ...

    By Argus Industrial Co. LLC.. based in Pontiac, MICHIGAN (USA).

  • Filtra Systems - Model PV-50 - Standalone Machine Tool Coolant Filter

    Filtra-Systems' PV-50 is a complete, turnkey liquid and air filtration solution for grinding and honing CNC machine tools. The PV-50 is a vacuum filter that provides coolant or oil at the flow rate, pressure, temperature and clarity that the machine tool requires. Our Gen II Mist Collector system is attached to the PV-50. The Gen II Mist Collector ...

    By Filtra Systems based in Farmington Hills, MICHIGAN (USA). from Standalone Machine Tool Coolant Filter Product line

  • ANDRITZ MeWa - Model Bio-QZ - Cross-Flow Shredder

    The Bio-QZ is used in hundreds of European biogas facilities for processing many different input materials. Flexible tools inside the machine produce a homogeneous substrate that lead to faster gas formation, shorter fermentation time, and higher gas yield overall in the fermenter. The new Bio-QZ generation is now available in a modern, compact, ...

    By ANDRITZ MeWa - ANDRITZ Group Office in Novi, MICHIGAN (USA). from Cross-Flow Shredder Product line

  • KNOLL - Conveyor and Filtering System (Pump Technology)

    Areas of application: The circuit system is suitable for the fully automatic return of the chip/cooling-lubricant mixture of several processing machines to a central separator/filter. This central separator/filter supplies the machines with cleaned cooling lubricant. The system is used in large production areas with a machine train of 30 and more ...

    By KNOLL Maschinenbau GmbH Office in Madison Heights, MICHIGAN (USA). from Conveyor and Filtering System (Pump Technology) Product line

  • Unisorb RK Fixator - Anchoring/ Alignment System

    RK FIXATOR SYSTEMS level and align machinery to tolerances of 0.0001' (0.0025mm), and make it possible to vary adjustments at any time, even under maximum loads requiring only a small hand wrench to adjust. Time consuming work and production losses normally associated with alignments are eliminated. While affording the most rigid ...

    By Unisorb based in Jackson, MICHIGAN (USA).

  • TorqueTrak - Power Monitoring and Control System

    The TorqueTrak Revolution Series is a torque and power monitoring and control system that features inductive (non-contact) power and data transfer for continuous operation. Designed for applications that require ongoing measurement of torque and/or horsepower the TorqueTrak Revolution system is custom-machined to install on existing shafting up to ...

    By Binsfeld Engineering Inc based in Maple City, MICHIGAN (USA). from Power Monitoring and Control System Product line

  • PRAB - Pneumatic Conveyors Systems

    The pneumatic conveyor systems offer operation and installation flexibility. Sytems are designed to pick up directly from CNC machining centers and transfer wet or dry material to a central chip processing systems or load out containers.

    By PRAB, Inc based in Kalamazoo, MICHIGAN (USA). from Pneumatic Conveyors Systems Product line

  • KNOLL - Conveyor System (Extraction Technology)

    Areas of application: The vacuum conveyor system serves to transport chips fully automatically from several processing machines to a central collecting point. The carrier medium is room air, which transports the dry or slightly damp chips over a conveying distance of up to 560 m. The system is used in production areas with a large number of ...

    By KNOLL Maschinenbau GmbH Office in Madison Heights, MICHIGAN (USA). from Conveyor System (Extraction Technology) Product line

  • TorqueTrak - Model TPM2 - Power Monitoring System

    The TorqueTrak Torque and Power Monitoring System (TPM2 series) is a rugged precision instrument designed to measure torque and/or power on rotating shafts in real time.  The TPM2 uses RS422 full duplex, point - to - point serial interface communication.  The TPM2 is custom designed to fit on shafting up to 40 inches (1016 mm) in ...

    By Binsfeld Engineering Inc based in Maple City, MICHIGAN (USA). from Power Monitoring System Product line

  • PRAB - Quick Return (QR) Conveyors System

    Whether your needs are in-floor or above grade, press-mounted, or machine tool the PRAB Quick Return Conveyor (QR) will effectively move scrap away from your process, keeping your production moving.

    By PRAB, Inc based in Kalamazoo, MICHIGAN (USA). from Quick Return (QR) Conveyors System Product line

  • PRAB - Model Enviro 1200 - Chip Removal & Fluid Filtration System

    PRAB's Enviro 1200 is a highly efficient, low-maintenance solution for improving machining productivity at the source by removing chips and filtering fluids with a single, integrated system. Productivity is increased through automated chip and fluid handling. Cleaner fluids improve tool life and surface finish.

    By PRAB, Inc based in Kalamazoo, MICHIGAN (USA). from Chip Removal & Fluid Filtration System Product line

  • Filtra-Systems - Model Mini-Vac - Compact Portable Oil Filtration System

    The Mini-Vac is a compact portable oil filtration system for removing solid contaminants from water-soluble oils, synthetic coolants, mineral seal oils, and heavier cutting oils. Its compact, self-contained design allows easy installation in confined areas. Wheel-mounted Mini-Vacs can be rolled anywhere in your plant to clean the average machine ...

    By Filtra Systems based in Farmington Hills, MICHIGAN (USA). from Compact Portable Oil Filtration System Product line

  • Double Tube Drilling Systems (DTS)

    The double tube system “DTS” or sometimes referred to as the “Ejector” system of drilling is where the coolant is supplied at the machine spindle through a special coolant inducer or connector. As the name implies, this drilling system consists of an outer and inner tube that is connected to the coolant inducer at one end ...

    By BTA Heller Incorporated based in Troy, MICHIGAN (USA). from Double Tube Drilling Systems (DTS) Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you