Only show results in Virginia? Ok

Mact Emission equipment

  • Premium

    Tekran - Model 3300Xi HgCEM - Mercury Continuous Emission Monitor - Mercury CEM - Flue Gas Analysis - Emission Analyzer

    The EPA Electric Generating Unit Mercury and Air Toxics (EGU MATS) and Portland Cement Maximum Achievable Control Technology (PC MACT) regulations require reductions in gaseous mercury emissions. Tekran has proven technology to support mercury compliance monitoring, abatement system optimization, and performance audit testing instrumentation.

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Flue Gas CEM Product line

  • Cormetech - Model COMET™ - Oxidized Mercury Emissions Technology

    Cormetech's Oxidized Mercury Emissions Technology (COMET™) is Cormetech's next generation catalyst technology that allows coal-fired power plants to meet stringent mercury emission standards, such as Mercury and Air Toxics Standards (MATS), while reducing the cost of activated carbon injection (ACI) solutions.

    By Cormetech, Inc. based in Durham, NORTH CAROLINA (USA). from Stationary Catalysts Product line

  • Spectra - Model U-Series - Chrome Scrubbers

    Before the prominence of Chrome Scrubbers, wet scrubbers were used to control emissions from chromium electroplating processes.  In 1995, The US EPA promulgated a Maximum Achievable Control Technology (MACT) Standard, which created a need for ultra-efficient control devices for hard chrome electroplating operations.

    By KCH Services, Inc. based in Forest City, NORTH CAROLINA (USA). from Mist Eliminators Product line

  • Sorbent Trap System

    The M&C Sorbent Trap Sampler system is designed to monitor total vapor-phase mercury (Hg) emissions in stationary source flue gas streams for Utility MACT (Maximum Achievable Control Technology standards) and MATS (Mercury and Air Toxics Standards) compliance for industries such as: power generation, cement, waste incinerators and several ...

    By M&C TechGroup North America based in Ventura, CALIFORNIA (USA).

  • Nol-Tec - Dry Sorbent Injection

    There are a number of technologies available to help industrial boiler operators, fossil fueled electrical generation facilities, and biomass plants meet recently established and emerging EPA requirements (including the recent Boiler MACT). Determining the most cost-effective method of Hg, HCl, HF, SO2 and SO3 mitigation can be a daunting ...

    By Nol-Tec Systems, Inc. based in Lino Lakes, MINNESOTA (USA).

  • NFM - Model ePTFE - Membrane Technology

    High durability, high efficiency ePTFE membrane helps meet EPA requirements (PM2.5, MACT, NESHAP) and will reduce Total Cost of Ownership with: Reduced emissions (PM10, PM2.5 and Sub-Micron PM). Lower operating differential pressure. Longer effective life cycle of bags and pleated bags. Aids in recovery from upset conditions such as moisture, ...

    By National Filter Media (NFM) based in Winchester, VIRGINIA (USA). from Filter Media Product line

  • FilterSense - Compliance and Optimization Systems

    FilterSense systems combine project planning, sensors, controls, operator HMI, SCADA, reporting software, full documentation, training, and support into a total solution for critical industry needs such as EPA compliance and plant optimization for process control, energy savings, and maintenance reduction.

    By FilterSense based in Beverly, MASSACHUSETTS (USA). from Other Product line

  • Model RTO - Regenerative Thermal Oxidizers

    Regenerative Thermal Oxidizers – Air Clear Regenerative Thermal Oxidizers (RTO) Manufacturer of Custom Designed Systems. Thermal Regenerative Oxidizers are the most energy efficient and cost effective solutions for the reduction of Volatile Organic Compounds (VOCs) and odorous air emission.  The primary function of the Thermal ...

    By Air-Clear LLC based in Elkton, MARYLAND (USA). from Thermal & Catalytic Oxidizers Product line

  • Altech - Model AMESA-M - Mercury Sorbent Trap System (STMS)

    With over 10 years experience with mercury monitoring, from providing complete on-line mercury CEMS to our own “AMESA – M” sorbent trap monitoring system (STMS), Altech has the solution to your mercury monitoring needs.

    By envea™ Altech Environment U.S.A. based in Geneva, ILLINOIS (USA). from Engine Gas Monitoring Product line

  • Tellkamp - Painted Extruded Aluminum

    Tellkamp Systems, Inc. works with clients to design the most efficient aluminum extrusion paint finishing system available. We provide each of the components necessary for installation of an extrusion paint line. The decision between a vertical or horizontal paint system is typically based on production capacity requirements and the need for ...

    By Tellkamp Systems Inc based in Santa Fe Springs, CALIFORNIA (USA).

  • Inland Technology - Model EP-921 - Replacement for MEK and Lacquer Thinner

    EP-921 - Replacement for MEK and Lacquer Thinner.  Designed for resin and paint application equipment clean-up. Contains no Hazardous Air Pollutants (HAPS).

    By Inland Technology based in Tacoma, WASHINGTON (USA). from Cleaning Solutions Product line

  • Premium

    Land - Model 4650-PM - Compliance Particulate Matter Monitor

    High-sensitivity, forward-scatter laser measurement for particulate matter, for use in combustion processes where condensed water is not present (for sale in the USA and China only). 4650-PM provides the stable, accurate low-range measurement of particulate matter in stacks and ducts where water droplets are not present in the flue gas. NOTE: The ...

    By AMETEK Land based in Dronfield, UNITED KINGDOM. from Opacity and Dust Monitors Product line

  • Regenerative Catalytic Oxidizer

    Regenerative Catalytic Oxidizers are designed for plant processes where the waste gas stream has VOC loading high enough to meet the energy requirement of regenerative catalytic systems for fuel-free operation. However, VOC’s low enough to make a regenerative thermal oxidizer to costly to operate. In that case a Regenerative Catalytic ...

    By American Environmental Fabrication & Supply, LLC based in Hulbert, OKLAHOMA (USA).

  • Despatch - VOC Thermal Oxidizer

    Virtually maintenance-free elimination of Volatile Organic Compounds in exhaust gasses. Despatch’s VOC Thermal Oxidizer was designed to eliminate 99% of Volatile Organic Compounds (VOCs) from gasses exhausted during the drying step of solar cell manufacturing.

    By Despatch Industries based in Lakeville, MINNESOTA (USA). from Solar Products Product line

  • CATOX - Catalytic Oxidizers

    Catalytic Oxidizers (CATOX™) use a catalyst to promote the oxidation reaction to occur.  Catalytic oxidation requires less than half the heat (500-600°F) needed for thermal oxidation (1,400-1,600°F) and creates an opportunity to substantially reduce fuel expenses and material costs. The addition of a Recuperative (heat ...

    By Air-Clear LLC based in Elkton, MARYLAND (USA). from Thermal & Catalytic Oxidizers Product line

  • ECharge - Electrostatic Precipitator

    Features a Highly Efficient Design for Maximum Process or Indoor Air Pollution Control: The economical Bionomic ECharge Electrostatic Precipitator is able to achieve extremely high removal efficiency on small micron and submicron particulate to easily meet PM 2.5 environmental regulations. Opacity problems associated with smoke-type submicron ...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA). from Wet/Dry Electrostatic Precipitator Product line

  • VersaMAPS - Versatile Multi-Pollutant Control System

    The BoldEco VersaMAPS (versatile multi-pollutant control system) is a low capital and operating cost solution for removing acid gases, nitrogen oxides, mercury (both ionic and elemental) and particulate matter (including PM 2.5) concurrently. The VersaMAPS can be implemented with integrated single-stage oxidizer NOX removal or with a second stage ...

    By BoldEco Environment, Inc. based in Skillman, NEW JERSEY (USA). from Multi-Pollutant Product line

  • Wet Electrostatic Precipitator (Wet ESP): Particulate Control & Opacity Control

    Industry Installations include corn dryers, fryer lines, PVC ovens, wood industry dryers, pulp and paper recovery boilers, refinery waste fuel boilers, foundry cupola, glycol incinerator, and mixed fuel co-generation.

    By PPC Air Pollution Control Systems based in Longview, TEXAS (USA).

  • PPC - Biofilter (Biofiltration): VOC & Odor Control System

    PPC has applied biofilters & biofiltration to a variety of processes and industries including: fiberglass, matt, styrene butadiene rubber, corn processing, optic lens coating, x-ray film, can coating, animal food production, food flavor production, printing, tobacco production, oriented strand board, particle board, MDF and distillation.

    By PPC Air Pollution Control Systems based in Longview, TEXAS (USA).

  • LEAK ALERT - Model 65-02 - Dust Filter Leak Monitors

    The LEAK ALERT 65-02 is particularly suited for use on fabric filter type dust collectors (baghouses).  It provides reliable and robust monitoring of particulate dust levels and leaks from faulty bag media.  The sensor, installed after the bagfilter, conditions, amplifies and analyses the dust signal and communicates a secure digital ...

    By PCME Ltd - part of the Environnement S.A Group based in St. Ives, UNITED KINGDOM. from Filter Leak Monitors Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you