Marine Pollution Equipment
-
based in USA
In the wake of the Deepwater Horizon oil spill in the Gulf of Mexico, the necessity for a more efficient and effective means of collecting oil from the water’s surface was readily apparent. Out of this necessity, the Gulp series oil skimmers were created. With a total of 8 units deployed during the response, Gulp Oil Skimmers is credited with collecting a vast amount of the recovered ...
-
by Orbital EOSbased in SPAIN
Oil spills can be produced by ships, oil rigs or accidents. We provide early warning and marine pollution reports with key insights, including spill quantification to improve decision ...
-
Manufactured by NEODIS Co., LTD.based in SOUTH KOREA
The disposal of marine dumping for food waste is totally banned from 2013 according to the International Convention for the Prevention of Marine Pollution, the "London Convention 1996". So, the preparation of measures regarding food waste is becoming a "fire of instability. But, recycling of local governments and construction of public ...
-
Manufactured by Oil Pollution Environmental Control Ltdbased in UNITED KINGDOM
They are used in conjunction with all types of OPEC marine pollution equipment and others to store recovered oil from polluted water. Standard capacity range between 5 and 100 tonnes. As well as for oil, the tanks can be made to order for use to store potable water and chemicals. flexitanks are a perfect ancilliary to force 5 and force 7 ...
-
based in USA
Our inventory of pumps includes peristaltic pumps for underwater defueling, 2”, 3”, and 4” trash pumps for dewatering, and Moyno pumps for heavy products. We are also the custodian/operator of TK-6 and CCN-150 pumping systems owned by Marine Pollution Control out of Detroit. Our inventory of tanks includes several 250 ...
-
by SeaLab SRLbased in BELGIUM
activities and decide the best response strategy to tackle marine pollution. SeaLab allows you to monitor a particular coastal area through a custom platform that provides an overview of the hydrodynamic and meteorological conditions. A daily forecast is provided showing the state of the sea and atmosphere for the next 10 days. We take care of the model ...
-
Manufactured by Vikoma International Limitedbased in UNITED KINGDOM
environment. Pollutants are available in various sizes from 5m3 to 100m3. Pollutanks can be used to transport oil products in port and marine operations or for the intermediate storage/transportation of recovered oil. Alternatively, they can also be used for the transportation of all kinds of low-density ...
-
Manufactured by Marina Trash Skimmer (MTS), Division of Keco Inc.based in USA
Tackling the growing epidemic of water pollution and marine debris is of critical importance and the Marina Trash Skimmer® (MTS) has been designed exclusively for the removal of trash and pollutants at a commercial scale. With a nearly indestructible shell holding industrial-grade components, the MTS is designed to function across the ...
-
based in USA
For permanent or semi-permanent installations and industrial applications a more durable type of boom/barrier may be more suitable. These systems are constructed of a heavy-duty belt fabric suspended by a series of plastic floats. The advantage of these barriers is their increased tensile strength and durability. Specialized fabrics and floats are available for particularly harsh environments ...
-
based in USA
The 85-gallon overpack drum can be used to store leaking or unmarked/abandoned 55-gallon drums. Once the drum has been positioned in the overpack unit and sealed, the overpack provides a secondary containment system that is in compliance with D.O.T. regulations (required for transportation). These overpack drums are lightweight, sturdy, and feature an easy-sealing ...
-
based in USA
Drum skimmers operate under the principle of adhesion. The rotating drum has an oleophilic surface that collects the floating material, delivers it to a collection bin, then pumps it into a storage tank. These skimmers, which can be hydraulically or pneumatically powered, are best suited for heavier concentrations of material and for episodic operations where personnel continuously or ...
-
based in USA
Absorbent pads provide an economical solution to small spills and routine cleaning activities during maintenance operations. Special fabrics are available to recover oil or specific chemicals. They are available in packages of 100 or 200 ...
-
based in USA
The KMA 333 is of the axial flow design, with impeller pitch adjusted to maximize its efficiency when transferring viscous products at moderate to high-head conditions (up to 265 feet). The pump features a stainless steel intake, impeller, stator, and plenum, and can be outfitted with a stainless steel motor for use with aggressive chemicals including caustics and acids. Its dual lip Teflon seal ...
-
Manufactured by Gobbler Boats Ltd.based in UNITED KINGDOM
Specially manufactured in the USA for installation on Gobbler vessels, providing an aerial facility to track progress of weed and oil spills at sea, pollution and pipe leakage on land, or problems in difficult to access areas. The camera deliversLat/Long information and real time photos of the affected areas, and returns to automatically ...
-
based in PORTUGAL
Shipping accidents are a huge concern to the European Community, and in particular those which cause loss of human life or major pollution in EU sea areas and along the coastline of the Member States. Therefore, it is vital that an EU level system is set in place which is capable of substantially reducing the risk of such accidents. A ...
-
Manufactured by Optimare Systems GmbHbased in GERMANY
The OPTIMARE LFS-P is a compact nadir-looking (non-scanning) airborne laser fluorosensor for day & night oil type classification. OPTIMARE’s fourth generation laser fluorosensor was designed to be operated routinely as a part of a modern airborne maritime surveillance system. More than two decades of expertise as well as progress in opto-electronics and laser technology enabled OPTIMARE ...
-
Manufactured by Azienda Chimica Genovese (ACG)based in ITALY
COPRON is an anti-fouling system based on dosing of cuprous ions produced through ionisation of copper anodes [MGPS]. Copper is considered to be one of the three most toxic heavy metals for marine invertebrates. Copper limits reproduction, rapid growth and alteration of the composition of the organisms present in sea ...
-
Manufactured by SEABERbased in FRANCE
YUCO PAM is an innovative autonomous solution for passive acoustic monitoring. Instead of a mounted hydrophone it is a fully autonomous recorder that is embedded in the YUCO-PAM ...
-
Manufactured by SEABERbased in FRANCE
YUCO-SCAN micro-AUV just make AUV technology accessible. Using YUCO-SCAN is certainly nowadays one of the most simple and cost-effective way to perform bathymetric surveys. Equipped with a 680kHz Side Scan Sonar from DeepVision YUCO-Scan provide with a great quality of image with high-stability, accurate navigation and capable of managing coastal areas with waves and ...
-
Manufactured by Class Instrumentation Ltd.based in UNITED KINGDOM
CARGO-SAFE The choice of marine surveyors across the globe. The ingress of water through leaking hatch covers is a main cause of damage to cargo. It is in the interest of ship owners, managers and insurers to guarantee the cargo hold is watertight, as damaged cargo caused by water leaking through hatch covers often results in large claims ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you